Instruction/ maintenance manual of the product MultiSync LCD1850E LCD1850E LCD1850E NEC
Go to page of 32
MultiSync LCD1850E User ’ s Manual.
English-1 English TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSER TED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOL T AGE COMPONENTS INSIDE.
English-2 Declaration Declaration of the Manufacturer We hereby certify that the colour monitor MultiSync LCD1850E (LCD1850E) MultiSync LCD1850E (LCD1850E-BK) is in compliance with Council Directive 7.
English-3 English For the Customer to use in U.S.A. or Canada Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
English-4 2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
English-5 English Contents Y our new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD1850E monitor with tilt base • Power Cord(s) •V ideo Signal Cable • User ’ s Manual • NEC LCD Setup Software, User ’ s Manual and other helpful files.
English-6 Quick Start To attach the MultiSync LCD monitor to your system, follow these instructions: 1. T urn off the power to your computer . 2. For the PC: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your system ( Figure A.
English-7 English NOTE: If you have any problems, please refer to the T roubleshooting section of this User ’ s Manual. NOTE: Refer to User ’ s Manual in the NEC LCD Setup Software CD case for installation and operation of this software. Figure B.
English-8 Figure D.1 Figure C.1 Input1 Input2 V acation Switch Power Button Connector Cover Power Cord.
English-9 English T ilt and Swivel Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired ( Figure TS.1 ). Remove Monitor Stand for Mounting To prepare the monitor for alternate mounting purposes: 1. Disconnect all cables.
English-10 Caution: Please use the original screws (4pcs) when mounting to avoid damage to the monitor and stand. T o fulfil the safety requirements the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor .
English-11 English Menu Exits the OSM controls. Exits to the OSM main menu. Moves the highlighted area left/right to select control menus. Moves the highlighted area up/down to select one of the controls. Moves the bar left/right to increase or decrease the adjustment.
English-12 AUTO ADJUST Adjusts the image displayed for non-standard video inputs. Auto Adjust Automatically adjusts the Image Position, the H. Size and Fine setting. Position Controls LEFT/RIGHT Controls Horizontal Image Position within the display area of the LCD.
English-13 English sRGB sRGB mode dramatically improves the colour fidelity in the desktop environment by a single standard RGB colour space. With this colour supported environment, the operator could easily and confidently communicate colours without further colour management overhead in the most common situations.
English-14 LAST DETECT The video input has to be switched to the “LAST DETECT” mode. When the monitor is displaying a signal from the current source and a new secondary source is supplied to the monitor , then the monitor will automatically switch to the new video source.
English-15 English RESOLUTION NOTIFIER This optimal resolution is 1280 x 1024. If ON is selected, a message will appear on the screen after 30 seconds, notifying you that the resolution is not at 1280 x 1024. F ACTOR Y PRESET Selecting Factory Preset allows you to reset all OSM control settings back to the factory settings.
English-16 CHECK CABLE: This function will advise you to check all Video Inputs on the monitor and computer to make sure they are properly connected..
English-17 English Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TISYNC LCD COLOUR MONITOR: • DO NOT OPEN THE MONIT OR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
English-18 CAUTION • Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block ventilated openings or place the monitor near a radiator or other heat sources. Do not put anything on top of monitor . • The power cable connector is the primary means of detaching the system from the power supply .
English-19 English •A void displaying fixed patterns on the monitor for long periods of time to avoid image persistence (after-image effects). • Get regular eye checkups. Ergonomics To realize the maximum ergonomics benefits, we recommend the following: • Use the preset Size and Position controls with standard signals.
English-20 5 °C to 35 °C 30% to 80% 0 to 3,658 m -10 °C to +60 °C 10% to 85% 0 to 16,225 m W eight Environmental Considerations Operating T emperature: Humidity: Altitude: Storage T emperature: Humidity: Altitude: 8.
English-21 English *1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen.
English-22 Features sRGB Colour Control: A new optimized colour management standard which allows for colour matching on computer displays and other peripherals. The sRGB, which is based on the calibrated colour space, allows for optimal colour representation and backward compatibility with other common colour standards.
English-23 English W ide V iewing Angle T echnology: Allows the user to be able to see the monitor from any angle (160 degrees) from any orientation – Portrait or Landscape.
English-24 T roubleshooting No picture • The signal cable should be completely connected to the display card/ computer . • The display card should be completely seated in its slot. • Check the V acation Switch should be in the ON Position. Front power Switch and computer power switch should be in the ON position.
English-25 English Image is unstable, unfocused or swimming is apparent • Signal cable should be completely attached to the computer . • Use the OSM Image Adjust controls to focus and adjust display by increasing or decreasing the fine total. When the display mode is changed, the OSM Image Adjust settings may need to be readjusted.
English-26 TCO ’ 99 This is a translation of the original English TCO'99 document. MultiSync LCD1850E (LCD1850E) Congratulations! Y ou have just purchased a TCO’99 approved and labeled product! Y our choice has provided you with a product developed for professional use.
English-27 English The requirements cover a wide range of issues: environment, ergonomics, usability , emission of electrical and magnetic fields, energy consumption and electrical and fire safety .
English-28 Cadmium** Cadmium is present in rechargeable batteries and in the colourgenerating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses.
English-29 English TCO ’ 95 MultiSync LCD1850E Black Model (LCD1850E-BK) Congratulations! Y ou have just purchased a TCO’95 approved and labeled product! Y our choice has provided you with a product developed for professional use.
English-30 The environmental demands concern restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things.
English-31 English Cadmium** Cadmium is present in rechargeable batteries and in the colourgenerating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. TCO’95 requirement states that batteries may not contain more than 25 ppm (parts per million) of cadmium.
An important point after buying a device NEC NEC MultiSync LCD1850E LCD1850E LCD1850E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC NEC MultiSync LCD1850E LCD1850E LCD1850E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC NEC MultiSync LCD1850E LCD1850E LCD1850E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC NEC MultiSync LCD1850E LCD1850E LCD1850E you will learn all the available features of the product, as well as information on its operation. The information that you get NEC NEC MultiSync LCD1850E LCD1850E LCD1850E will certainly help you make a decision on the purchase.
If you already are a holder of NEC NEC MultiSync LCD1850E LCD1850E LCD1850E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC NEC MultiSync LCD1850E LCD1850E LCD1850E.
However, one of the most important roles played by the user manual is to help in solving problems with NEC NEC MultiSync LCD1850E LCD1850E LCD1850E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC NEC MultiSync LCD1850E LCD1850E LCD1850E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
