Instruction/ maintenance manual of the product LCD3210 NEC
Go to page of 40
32 T o l e a r n a b o u t o t h e r s p e c i a l o f f e r s , r e g i s t e r o n l i n e a t w w w . n e c d i s p l a y . c o m MANUEL UTILISATEUR.
English-1 English Important Information ........................................................................................................................... English-2 Safety Precautions, Maintenance, & Recommended Use ......................
English-2 Importan t Information Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.
English-3 English CAUTION Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following condi - tions: • When the power supply cord or plug is damaged. • If liquid has been spilled, or objects have fallen into the moni - tor.
English-4 Contents *Install at the time of unpacking if the display will be used with the stand. * Remember to save your original box and packing material to transport or ship the monitor.
English-5 English 4. To prevent the LCD Monitor from falling down Fasten the LCD monitor to a wall using a cord or chain which is sufficient to support the weight of the LCD monitor (approx. LCD3210 17.0kg). Before moving the LCD monitor, the cord or chain should be removed.
English-6 Control Panel DOWN ( ) button Activates the OSM menu when the OSM menu is turned-off. Acts as button to move the highlighted area down to select the adjustment with OSM menu. EXIT button Activates the OSM menu when the OSM menu is turned-off.
English-7 English RG B 1 (D VI -D ) RG B 2 (D- SU B) RG B OU T ( D- SU B) R G H V Y R R L L Cb /P b Cr /P r S- VI DE O I N IN OU T IN OU T IN 3 IN 2 IN 1 B RS -2 32 IN 5 4 1 0 9 8 7 1 1 6 A C IN P C I.
English-8 Wireless Remote Control POWER button Switches the power on/off. * If Power Indicator is not glowing, then no controls will work. INPUT button Selects from input signal, [RGB1], [RGB2], [RGB3], [DVD/HD], [VIDEO] and [VIDEO<S>]. [DVD/HD], [VIDEO] and [VIDEO<S>] inputs can be selected when the AV optional module is installed.
English-9 English Operating Range for the Remote Control Point the top of the remote control toward the LCD monitor’s remote sensor while pressing button.
English-10 1. Determine the installation location CAUTION Installing your LCD display must be done by a qualified technician. Contact your dealer for more information. CAUTION MOVING OR INSTA LLING THE LCD MONI TOR MUST BE DONE BY TWO OR MORE PEOPLE.
English-11 English 10. Recommended Adjustments To reduce the risk of the “image persistence”, please adjust the fol- lowing items based on the application being used. “SCREEN SAVER” (See page 24), see page ”SIDE BORDER COLOR” (See page 24), “DATE & TIME” (See page 27), “SCHEDULE” (See page 27) 11.
English-12 Before connecting external equipment to LCD: * First turn off the power to all of the equipment associated with the LCD as well as that of the equipment to be connected. * For questions regarding external equipment please refer to the user’s manual supplied with that equipment.
English-13 English Connecting your computer to your LCD monitor will enable you to display your computer’s screen image. Some video cards may not display an image correctly. • To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the provided RGB signal cable (mini D-sub 15 pin to mini D-sub 15 pin).
English-14 Connecting your Macintosh ® computer to your LCD monitor will enable you to display your computer’s screen image. Some video cards or drivers may not display images correctly. • For older Macintosh ® computers, use Macintosh cable adapter to connect to your Macintosh’s video port.
English-15 English Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface) stan - dard. Connecting to a Computer with a Digital Output Connections -continued • The RGB 1 IN connector also accepts a DVI-D cable.
English-16 Connecting your DVD player to your LCD monitor will enable you to display your DVD video. Refer to your DVD player’s owner’s manual for additional information. Connecting to a DVD Player Connections -continued • To connect the DVD/HD IN connector (BNC) on the LCD monitor, use a separately available BNC connector cable.
English-17 English You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier’s owner’s manual for additional information. Connecting to a Stereo Amplifier • Turn on the LCD monitor and the amplifier only after all connections have been made.
English-18 Basic Operation -Power ON and OFF Modes 1. Pressing the power button. NOTE: Before pressing the power button, be sure to turn on the Main Power Switch on the LCD monitor. 2. Using the remote control NOTE: Before operating the remote control, be sure to turn on the Main Power Switch on the LCD monitor.
English-19 English RGB 1, 2, 3 DVD/HD, VIDEO HIGHBRIGHT STANDARD sRGB HIGHBRIGHT STANDARD CINEM A The LCD monitor follows the VESA approved DPM Power Man- agement function.
English-20 OSM (On-Screen Manager) Controls - Picture PICTURE SET SET Press MENU button to open Main-menu Press UP or DOWN button to select sub-menu Press UP or DOWN button to select INPUT button Pres.
English-21 English OSM Controls -Screen Adjusts the color temperature of entire screen. Choosing a lower color temperature will make the screen reddish and a higher color temperature make the screen bluish. NOTE: sRGB picture mode is standard and cannot be changed.
English-22 V RESOLUTION ZOOM MODE SCREEN RESET Adjusts the vertical size by increasing or decreasing the setting. Press + button to expand the height of the image on the screen. Press - button to narrow the height of the image on the screen. Selecting Screen reset allows you to reset all OSM settings within SCREEN menu.
English-23 English OSM Controls -Configuration 1 A V A V A V A V A V.
English-24 *:INPUT RGB2/3 only LONG CABLE MANUAL SCREEN SAVER COLOR SYSTEM SIDE BORDER COLOR CONFIGURATION RESET FACTORY RESET Adjusts the side black bar color between black and white when 4:3 image displayed. Press + button, the bar will become whiter.
English-25 English Selects the method of input detection when more than two input devices are connected. FIRST DETECT: When the current video input signal is not present, then the monitor searches for a video signal from the other video input port.
English-26 S-VIDEO MODE INPUT RESOLUTIO N BLACK LEVEL EXPANSION GAMMA SELECTION SCAN MODE SCAN CONVERSIO N FILM MODE Sub-Menu Main-Menu ADVANCED OPTION EXIT :RETURN MENU :EXIT MENU INPUT RESOLUTION :S.
English-27 English OSM Controls -Advanced option IR CONTROL TILE MATRIX HEAT STATUS POWER ON DELAY DATE & TIME SCHEDULE ADV ANCED OPTION RESET Adjusts the delay time from "standby" to "power on" mode. "POWER ON DELAY" can be set between 0 and 50 sec.
English-28 OSM Controls -NOTE NOTE 1: IMAGE PERSISTENCE Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence occurs when a residual or “ghost” image of a previous image remains visible on the screen.
English-29 English Using the LCD with a Personal Computer (PC) LCD monitor Connection LCD Monitor+PC PC RS-232C Cable RS-232C “IN” terminal.
English-30 Using the LCD with a Personal Computer -continued 3) Control sequence (1) The command from a personal computer to the LCD monitor will take 400ms. (2) The LCD monitor will send a return command 400ms* after it has received an encode. If the command isn't received correctly, the LCD monitor will not send the return command.
English-31 English Using the LCD with a Personal Computer -continued Structure of the Read-command POWER Input Temperature of Internal monitor ASCII HEX ON OFF(stand by) RGB-1(DVI-D) RGB-2(D-sub) RGB-.
English-32 32”diagonal screen size adds a new dimension to information display technology. 1366 x 768 resolution allows for crisp text and precise images.
English-33 English Troubleshooting No picture • The signal cable should be properly connected to the display card/computer. • The display card should be properly seated in its slot. • Front Power Switch and computer power switch should be in the ON position.
References NEC Monitor Customer Service & Support Customer Service and Technical Support: (800) 632-4662 Fax: (800) 695-3044 Parts and Accessories/ Macintosh Cable Adapter: (888) 634-4662 Warranty Information www.necdisplay.com Online Technical Support www.
English-35 English LCD Module Design View Distance Frequency Pixel Clock Viewable Size Input Signal Pixel Pitch Resolution Color Brightness Contrast ratio Viewing Angle Horizontal Vertical PC Input Video Sync Input terminal VIDEO Input Analog Input (32" / 80 cm diagonal) 0.
Pin Assignment 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Name Video Signal Red Video Signal Green Video Signal Blue ND G ND G - C D D Red-GND Green-GND Blue-GND C) D D ( V 5 + ND G - C N Y S ND G DA S - C D.
Limited Warranty NEC Display Solutions of America, Inc. (hereinafter “NEC DISPLAY SOLUTIONS”) warrants this Product to be free from defects in material and workmanship and, subject to the conditio.
English-38 Declaration of the Manufacturer We hereby certify that the color moni- tor MultiSync ® LCD3210 (L325RM) is in compliance with Council Directive 73/23/EEC: – EN 60950-1 Council Directive 89/336/EEC: — EN 55022 — EN 61000-3-2 — EN 61000-3-3 — EN 55024 and marked with NEC Display Solutions, Ltd.
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Display Solutions of America, Inc.
An important point after buying a device NEC LCD3210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC LCD3210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC LCD3210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC LCD3210 you will learn all the available features of the product, as well as information on its operation. The information that you get NEC LCD3210 will certainly help you make a decision on the purchase.
If you already are a holder of NEC LCD3210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC LCD3210.
However, one of the most important roles played by the user manual is to help in solving problems with NEC LCD3210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC LCD3210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
