Instruction/ maintenance manual of the product LA-1422JMW NEC
Go to page of 15
MultiSync ® LCD 400V ™ User’s Manual Contents 1 Quick Start 2-3 Controls 4-5 Recommended Use 6-7 Specifications 8 Features 9 Troubleshooting 10 References 11 Limited Warranty 12 MultiSync ® LCD .
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
MultiSync LCD 400V Contents 1 Your new NEC Technologies MultiSync ® LCD monitor box* should contain the following: • MultiSync LCD 400V ™ monitor, LA-1422JMW, with tilt/swivel base • Power Cord.
Quick Star t To attach the MultiSync ® LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable to the connector of the display card in your system (Figure A.
Quick Star t 3 Figure E.1 Figure C.1 Figure D.1 Power Switch 78133331 9/25/98, 12:46 PM 5.
4 OSM ™ (On-Screen-Manager) Controls The OSM controls on the front of the monitor function as follows: Control Main Menu Sub-Menu EXIT Exits the OSM controls. Exits to the OSM controls main menu. CONTROL / Moves the highlighted Moves the highlighted area area up/down to select up/down to select one of the one of the controls.
5 Controls AccuColor ™ Control System Color presets select the desired color setting. If a setting is adjusted, the name of the setting will change to Custom . Color Gain (Red, Green, Blue): Increases or decreases Red, Green or Blue color depending upon which is selected.
Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC ® LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: Recommended Use • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level.
Specifications 8 Monitor MultiSync ® LCD 400V ™ Notes Specifications Monitor LCD Module Diagonal: 14.1 inch Active matrix; thin film transistor (TFT) Viewable Image Size: 14.
9 Features Analog Advantage: Capable of displaying unlimited colors in a continuous spectrum, providing a truer representation of color. The monitor’s high contrast LCD enhances color vibrancy and improves focus with no geometric distortion.
T roubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or system being used.
11 References • BBS (508) 635-4706 NEC Technologies’ Remote Bulletin Board System is an electronic service accessible with your system and a modem.
NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replac.
Part No. 78133331 Printed in Japan NEC LCD Series PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable p.
An important point after buying a device NEC LA-1422JMW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC LA-1422JMW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC LA-1422JMW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC LA-1422JMW you will learn all the available features of the product, as well as information on its operation. The information that you get NEC LA-1422JMW will certainly help you make a decision on the purchase.
If you already are a holder of NEC LA-1422JMW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC LA-1422JMW.
However, one of the most important roles played by the user manual is to help in solving problems with NEC LA-1422JMW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC LA-1422JMW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
