Instruction/ maintenance manual of the product JC-1941UMA NEC
Go to page of 16
MultiSync ® E 900 ™ User’s Manual MultiSync ® E 900 ™ User’s Manual NEC Enterprise S eries Contents 1 Quick Start 2-3 Controls 4-5 Recommended Use 6-7 Specifications 8 Features 9 Troubleshoo.
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
Your new NEC Technologies MultiSync ® E Series monitor box* should contain the following: • MultiSync E 900 ™ (JC-1941UMA) Monitor with tilt/swivel base • Power Cord • Captive Signal Cable .
Quick Star t Figure A.1 2 15-pin mini D-SUB Captive Signal Cable To attach the MultiSync ® E 900 ™ monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. If necessary, install the display card into your system.
Power Cord Power Outlet Figure D.1 RESET PROCEED EXIT CONTROL MultiSync E 900 Figure C.1 Figure B.1 Quick Star t 3 Computer Mac Adapter (Not included) Captive Signal Cable 15-pin mini D-SUB Untitled-1.
4 OSM ™ (On-Screen Manager) control buttons on the front of the monitor function as follows: EXIT Exits the OSM controls. CONTROL § / © Moves the highlighted area left/right to select one of the controls. CONTROL +/– Moves the bar in the + or – direction to increase or decrease the adjustment.
Tools 1 Reduces horizontal moire patterns. Reduces vertical moire patterns. Tools 2 Degauss Control: Eliminates the buildup of stray magnetic fields that alter the correct scan of the electron beams and affect the purity of the screen colors, focus and convergence.
Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC ® E 900 ™ COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: Recommended Use • Adjust the monitor height so that the top of the screen is at or slightly below eye level.
Specifications 8 Monitor MultiSync ® E 900 ™ Notes Specifications Monitor Picture Tube Diagonal: 19 inch 90 ° deflection, 0.28 mm trio dot pitch, Viewable Image Size: 18.0 inch medium short persistence phosphor, Radius: 1330 mm multi-layered, anti-static screen coating, semi-tint screen, Invar Shadow Mask and OptiClear ® screen surface.
9 Features OptiClear ® Screen Surface: Reduces reflection and glare and increases contrast without sacrificing focus level, clarity or brightness. Along with the flat square technology CRT, a high contrast screen with 0.28 mm trio dot pitch delivers crisp, clean text and graphics.
10 T roubleshooting No picture • Display card should be completely seated in its slot. • Power Button and computer power switch should be in the ON position. • Signal cable should be completely connected to display card/computer. • Check connector for bent or pushed-in pins.
References • BBS (978) 635-4706 NEC Technologies’ Remote Bulletin Board System is an electronic service accessible with your system and a modem. Communication parameters are: 300/1200/2400/9600/14.
NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase.
t Notes t 13 Untitled-1 6/15/98, 1:25 PM 15.
PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC Technologies and/or its licensors, .
An important point after buying a device NEC JC-1941UMA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC JC-1941UMA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC JC-1941UMA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC JC-1941UMA you will learn all the available features of the product, as well as information on its operation. The information that you get NEC JC-1941UMA will certainly help you make a decision on the purchase.
If you already are a holder of NEC JC-1941UMA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC JC-1941UMA.
However, one of the most important roles played by the user manual is to help in solving problems with NEC JC-1941UMA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC JC-1941UMA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
