Instruction/ maintenance manual of the product FE791SB NEC
Go to page of 41
1-1 User's Manual 1. A Version Mult iS ync ® FE791 SB TM /FE991 SB TM.
1-2 Index Warning .................................................................................................. 1 Contents ............................................................................................... 2 Quick Star t ............
1-3 1 TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
1-4 2 Your new NEC MultiSync ® FE monitor box* should contain the following: • MultiSync FE Monitor with tilt/swivel base • Power Cord • Captive Signal Cable • User’s Manual Content s Power Cor d User ’s Manua l * Remember to save your original box and packing material to transport or ship the monitor .
1-5 3 Quick St ar t Figure A.1 To attach the FE monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. If necessary, install the display card into your system. For more information, refer to the display card manual.
1-6 4 Quick St ar t –continued Figure D.1 Figure C.1 Power Button.
1-7 5 OSM ™ (On-Screen Manager) control buttons on the front of the monitor function as follows: Main Menu Sub-Menu EXIT Exits the OSM menu. Exits to the OSM controls main menu. CONTROL Moves the highlighted Moves the highlighted area / area left/right to select left/right to select one of the one of the sub-menus.
1-8 6 Color Control/AccuColor ® Control System Color presets selects the desired color setting. The bar is replaced by the color setting choice. Each color setting is adjusted at the factory to the stated Kelvin. If a setting is adjusted, the name of the setting will change from Kelvin to Custom except sRGB mode.
1-9 7 Contro ls –continued • Use the CONVERGENCE (HOR.) control to adjust the alignment of the lines in the up/ down direction. • Use the CONVERGENCE (VER.) control to adjust the alignment of the lines in the left/right direction. Tools 2 Language: OSM controls menus are available in 6 languages.
1-10 8 Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC ® FE COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
1-11 9 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: R e commende d Us e –continued • Adjust the monitor height so that the top of the screen is at or slightly below eye level.
1-12 10 Spe c if ications Monitor MultiSync ® FE 791 SB Notes Specifications Monitor Picture Tube Diagonal: 17 inch 90 ° deflection, 0.2 5 mm g rille pitch, Viewable Image Size: 16 inch medium short persistence phosphor, Radius: 50,000 mm aperture grille CRT, multi-layered, anti-static screen coating, dark-tint screen and OptiClear ® screen.
1-13 11 Monitor MultiSync ® FE 991 SB Notes Specifications Monitor Picture Tube Diagonal: 19 inch 90 ° deflection, 0.2 5/0. 27 mm g rille pitch, Viewable Image Size: 18 inch medium short persistence phosphor, Radius: 50,000 mm aperture grille CRT, multi-layered, anti-static screen coating, dark-tint screen and OptiClear ® screen.
1-14 12 Fe atur e s SuperBright TM Diamondtron ® CRT : This patented flat aperture grille CRT delivers an exceptional viewing experience with unprecedented brightness and contrast and a virtually flat image that reduces distortion and glare so that what you see on-screen is what you get on your printed output.
1-15 13 Reduced Magnetic Field™ T echnology: Reduces magnetic and alternating electric field emissions and static electricity , addressing ergonomic concerns regarding potential risks from extended computer monitor use.
1-16 14 T r oublesho oting No picture • Display card should be completely seated in its slot. • Power Button and computer power switch should be in the ON position. • Signal cable should be completely connected to display card/computer. • Check connector for bent or pushed-in pins.
1-17 15 R efer ences • BBS (978) 742-8706 NEC-Mitsubishi Electronics Display of America Remote Bulletin Board System is an electronic service accessible with your system and a modem. Communica- tion parameters are: 300/1200/2400/9600/14.4k/28.8k/33.
1-18 16 NEC-Mitsubishi Electronics Display of America, Inc. (hereinafter “NMD-A”) warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth.
1-19 17 TCO’95 MultiSync ® FE Black Model Congratulations! You have just purchased a TCO’95 approved and labeled product! Your choice has provided you with a product devel- oped for professional use.
1-20 18 toxins, PCBs, which are suspected to give rise to similar harm, including reproductive damage in fisheating birds and mammals, due to the bio-accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur.
1-21 19 TCO’99 MultiSync ® FE White Model Congratulations! You have just purchased a TCO’99 approved and labeled product! Your choice has provided you with a product devel- oped for professional use.
1-22 20 TCO’99 –continued health effects, including reproductive damage in fisheating birds and mammals, due to the bio- accumulative* processes. Flame retardants have been found in human blood and researchers fear that disturbances in foetus development may occur.
1-23 21 Declaration of the Manufacturer W e hereby cer tify that the color monitor MultiSync ® FE is in compliance with Council Directive 73/23/EEC: – EN 60950 Council Directive 89/336/EEC: EN 5502.
1-24 PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the valuable property of NEC-Mitsubishi Electronics Display.
1-25 2. B Version User ’ s Manual MultiSync FE79 1 SB /FE9 91 SB.
1-26 Declaration of the Manufacturer NEC-Mitsubishi Electric Visual Systems Corporation 686-1, Nishioi Oi-Machi Ashigarakami-gun Kanagawa 258-8533, Japan We hereby certify that the colour monitor Mult.
1-27 CA UTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICE- ABLE P ARTS INSIDE. REFER SERVICING T O QUALIFIED SERVICE PERSONNEL. RISK OF ELECTRIC SHOCK • DO NOT OPEN This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock.
1-28 4 User’s Manual Content s * Remember to save your original box and packing material to transport or ship the monitor. CD-ROM Y our new MultiSync FE monitor box* should contain the following: .
1-29 MultiSync FE791 SB / FE991 SB 5 Quick St art T o attach the MultiSync FE monitor to your system, follow these instructions: 1. T urn off the power to your computer . 2. If necessary , install the display card into your system. For more information, refer to the display card manual.
1-30 Quick St art – continued 6 User’s Manual Figure C.1 Power Outlet Power Cord Figure D.1 Power Button.
1-31 Controls OSM (On-Screen Manager) control buttons on the front of the monitor function as follows: Brightness/Contrast Controls Brightness: Adjusts the overall image and background screen brightness. Contrast: Adjusts the image brightness in relation to the background.
1-32 Controls – continued 8 User’s Manual Color Control System Colour presets selects the desired colour setting. The bar is replaced by the colour setting choice. Each colour setting is adjusted at the factory to the stated Kelvin. If a setting is adjusted, the name of the setting will change from Kelvin to Custom except sRGB mode.
1-33 MultiSync FE791 SB / FE991 SB 9 Controls – continued T ools 2 Language: OSM controls menus are available in 6 languages. OSM Position: Y ou can choose where you would like the OSM controls menu to appear on your screen.
1-34 Recommended Use 10 User’s Manual Safety Precautions and Maintenance • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel.
1-35 MultiSync FE791 SB / FE991 SB 11 Recommended Use – continued • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Y our eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 40 cm and no further away than 60 cm from your eyes.
1-36 Specifications 12 User’s Manual NOTE: T e c h n ical specifications are subject to change without notice. ............... r o t i n o M s n o i t a c i f i c e p S 1 9 7 E F c n y S i t l u M B S r o t i n o M s e t o N e b u T e r u t c i P: l a n o g a i Dh c n i 7 1 / m c 3 4, h c t i p e l l i r g m m 5 2 .
1-37 MultiSync FE791 SB / FE991 SB 13 Specifications – continued NOTE: T e c h n i c a l specifications are subject to change without notice. .............. r o t i n o M s n o i t a c i f i c e p S 1 9 9 E F c n y S i t l u M B S r o t i n o M s e t o N e b u T e r u t c i P: l a n o g a i Dh c n i 9 1 / m c 0 5e l l i r g m m 7 2 .
1-38 Features 14 User’s Manual SuperBright Diamond tron CRT : This patented flat aperture grille CRT delivers an exceptional viewing experi- ence with unprecedented brightness and contrast and a virtually flat image that reduces distortion and glare so that what you see on-screen is what you get on your printed output.
1-39 MultiSync FE791 SB / FE991 SB 15 T roubleshooting No picture • Display card should be completely seated in its slot. • Power Button and computer power switch should be in the ON position. • Signal cable should be completely connected to display card/computer .
1-40 TCO’99 16 User’s Manual MultiSync FE791 SB / FE991 SB Congratulations! Y ou have just purchased a TCO’99 approved and labeled product! Y our choice has provided you with a product developed for professional use.
1-41 TCO’99 – continued TCO’99 demand requires that plastic components weighing more than 25 grams must not contain flame retar- dants with organically bound chlorine and bromine. Flame retardants are allowed in the printed circuit boards since no substitutes are available.
An important point after buying a device NEC FE791SB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC FE791SB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC FE791SB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC FE791SB you will learn all the available features of the product, as well as information on its operation. The information that you get NEC FE791SB will certainly help you make a decision on the purchase.
If you already are a holder of NEC FE791SB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC FE791SB.
However, one of the most important roles played by the user manual is to help in solving problems with NEC FE791SB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC FE791SB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
