Instruction/ maintenance manual of the product EX231WP-BK NEC
Go to page of 25
MultiSync EX201W MultiSync EX231W MultiSync EX231Wp User ’ s Manual.
Index W arning, Caution ............................................................................................................... .......... English-1 Registration Information .....................................................................
English English-1 W ARNING CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM W ALL SOCKET . TO FULL Y DISENGAGE THE POWER T O THE UNIT , PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET . DO NOT REMOVE COVER (OR BACK).
English-2 Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.
English English-3 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TISYNC LCD COLOUR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
English-4 CORRECT PLACEMENT AND ADJUSTMENT OF THE MONIT OR CAN REDUCE EYE, SHOULDER AND NECK F A TIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level.
English English-5 Contents Y our new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD Monitor • Power Cord • AC Adapter • Stand • Base Stand • AC Adapter Holder.
English-6 Quick Start T o attach the Base to the LCD stand: 1. Place monitor face down on a non-abrasive surface ( Figure 1 ). NOTE: Handle with care when placing monitor face down to avoid damaging the front control keys.
English English-7 Figure C.1 Power Key Raise and Lower Monitor Screen The monitor may be raised or lowered. T o raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height ( Figure RL.1 ). NOTE: Handle with care when raising or lowering the monitor screen.
English-8 Remove Monitor Stand for Mounting T o prepare the monitor for alternate mounting purposes: 1. Disconnect all cables. 2. Place hands on each side of the monitor and lift up to the highest position. 3. Place monitor face down on a non-abrasive surface ( Figure S.
English English-9 Flexible Arm Installation This LCD monitor is designed for use with a flexible arm. T o mount the monitor to a flexible arm: 1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand. 2. Using 4 screws attach the arm to the monitor ( Figure F .
English-10 Menu Detects the level of ambient lighting allowing the monitor to make adjustments to various settings resulting in a more comfortable viewing experience. Do not cover this sensor . Indicates that the power is on. T urns the monitor ON and OFF .
English English-11 Simple MENU BRIGHTNESS Adjusts the overall image and background screen brightness. If ECO MODE is set to 1 or 2, a bar for CARBON FOOTPRINT will appear . ECO MODE can be set by FULL MENU. AUTO ADJUST (Analog input only) Automatically adjusts the Image Position, Horizontal Size, Fine and Contrast settings.
English-12 ECO MODE Decreases the power consumption by reducing the brightness level. OFF: Sets brightness variable from 0% to 100%. (ECO MODE) 1: Sets brightness variable range from 0% to 80%. This setting can adjust brightness to a range in which power is reduced to meet Energy Star measurement conditions.
English English-13 DV MODE Dynamic Visual Mode allows you to select from the following settings: ST ANDARD: Standard setting. TEXT : Setting that makes letters and lines crisp; best suited for basic word processing and spreadsheets. MOVIE: Setting that boosts dark tones; best suited for movies.
English-14 T ools DVI SELECTION: This function selects the DVI input mode. When the DVI selection has been changed, you must restart your computer . DIGIT AL: DVI digital input is available. ANALOG: DVI analog input is available. VIDEO DETECT : Selects the method of video detection when more than one computer is connected.
English English-15 ECO Information CARBON SA VINGS: Displays the estimated carbon savings information in kg. COST : Displays the electricity cost savings in balance. INTEGRAL POWER: Displays multiple values of the power consumption. CARBON CONVERT SETTING: Adjusts the carbon footprint factor in the carbon saving calculation.
English-16 Specifications - EX201W Monitor Specifications MultiSync EX201W Notes LCD Module Diagonal: 50.80 cm/20.0 inches Active matrix; thin film transistor (TFT) liquid Viewable Image Size: 50.
English English-17 Specifications - EX231W Monitor Specifications MultiSync EX231W Notes LCD Module Diagonal: 58.42 cm/23.0 inches Active matrix; thin film transistor (TFT) liquid Viewable Image Size: 58.
English-18 Specifications - EX231Wp Monitor Specifications MultiSync EX231Wp Notes LCD Module Diagonal: 58.42 cm/23.0 inches Active matrix; thin film transistor (TFT) liquid Viewable Image Size: 58.
English English-19 Features Lightweight Design: The design of the display , including a remarkably thin bezel and minimal stand components, promotes lightweight for easier portability and desktop maneuvering. Human Sensor: Shifts to a lower power consumption level when a person leaves the monitor , saving your monitor energy costs.
English-20 T roubleshooting No picture • The signal cable should be completely connected to the display card/computer . • The monitor does not support DisplayPort converter signal. • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position.
English English-21 Using the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly .
English-22 TCO Displays 5 Congratulations! This display is designed for both you and the planet! The display you have just purchased carries the TCO Certified label. This ensures that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
English English-23 NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment.
An important point after buying a device NEC EX231WP-BK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC EX231WP-BK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC EX231WP-BK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC EX231WP-BK you will learn all the available features of the product, as well as information on its operation. The information that you get NEC EX231WP-BK will certainly help you make a decision on the purchase.
If you already are a holder of NEC EX231WP-BK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC EX231WP-BK.
However, one of the most important roles played by the user manual is to help in solving problems with NEC EX231WP-BK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC EX231WP-BK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
