Instruction/ maintenance manual of the product E500 NEC
Go to page of 16
MultiSync ® E Series User’s Manual MultiSync ® E Series User’s Manual NEC Enter pr ise Seri es Contents 1 Quick Start 2-3 Controls 4-5 Recommended Use 6-7 Specifications 8-9 Features 10 Troubles.
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
Contents Power Cord Registration Card MultiSync ® E Series User’s Manual MultiSync ® E Series User’s Manual NEC Enter prise Series — Important — To help us in our continuing efforts to better serve and support you, and to bring you new and innovative products, please take a few moments to register your new NEC MultiSync monitor.
Quick Star t To attach the MultiSync ® E Series monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. If necessary, install the display card into your system. For more information, refer to the display card manual.
Quick Star t 3 Power Cord Power Outlet Figure D.1 RESET PROCEED EXIT CONTROL MultiSync E 500 Figure C.1 Figure B.1 Computer Mac Adapter (Not included) Captive Signal Cable 15-pin mini D-SUB 78131861 5.
4 OSM ™ (On-Screen Manager) control buttons on the front of the monitor function as follows: EXIT Exits the OSM controls. CONTROL § / © Moves the highlighted area left/right to select one of the controls. CONTROL +/– Moves the bar in the + or – direction to increase or decrease the adjustment.
Tools Degauss Control: Eliminates the buildup of stray magnetic fields that alter the correct scan of the electron beams and affect the purity of the screen colors, focus and convergence. When activated, your screen image will jump and waver a bit as the screen is demagnetized.
Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC ® E SERIES COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: Recommended Use • Adjust the monitor height so that the top of the screen is at or slightly below eye level.
Specifications 8 Monitor MultiSync ® E 500 ™ Notes Specifications Monitor Picture Tube Diagonal: 15 inch 90 ° deflection, 0.25 mm mask pitch, Viewable Image Size: 13.
9 Monitor MultiSync ® E 700 ™ Notes Specifications Monitor Picture Tube Diagonal: 17 inch 90 ° deflection, 0.25 mm mask pitch, Viewable Image Size: 15.6 inch CromaClear ™ CRT, medium-short persistence Radius: 1210 mm phosphor, multi-layered, anti-static screen coating, dark-tint screen, Invar Shadow Mask and OptiClear ® screen surface.
10 Features CromaClear ™ CRT: Delivers images with more clarity than found in traditional CRT’s. Phosphors appear elliptical when illuminated, resulting in screen images with more depth and dimension. OptiClear ® Screen Surface: Reduces reflection and glare and increases contrast without sacrificing focus level, clarity or brightness.
11 T roubleshooting No picture • Display card should be completely seated in its slot. • Power Button and computer power switch should be in the ON position. • Signal cable should be completely connected to display card/computer. • Check connector for bent or pushed-in pins.
12 References • BBS (508) 635-4706 NEC Technologies’ Remote Bulletin Board System is an electronic service accessible with your system and a modem.
NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase.
NEC Enterprise Series Part No. 78131861 Printed in Malaysia PROPRIETARY NOTICE AND LIABILITY DISCLAIMER The information disclosed in this document, including all designs and related materials, is the .
An important point after buying a device NEC E500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NEC E500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NEC E500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NEC E500 you will learn all the available features of the product, as well as information on its operation. The information that you get NEC E500 will certainly help you make a decision on the purchase.
If you already are a holder of NEC E500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NEC E500.
However, one of the most important roles played by the user manual is to help in solving problems with NEC E500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NEC E500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
