Instruction/ maintenance manual of the product PXI-1045 National Instruments
Go to page of 7
USER GUIDE NI PXI-1045 Power Supply Shuttle This document explains the installation and maintenance of the NI PXI-1045 power supply shuttle. The NI PXI-1045 power supply shuttle is a replacement part for the PXI-1045 chassis.
NI PXI-1045 Power Supply Sh uttle User Guide 2 ni.com What Y ou Need to Get Started To set up and use the NI PXI-1045 Power Supply Sh uttle, you need the following i tems: ❑ PXI-1045 chassis (the un.
© National Instruments Corporation 3 NI PXI-1045 Power Supply Sh uttle User Guide Installation and Maintenance The information in t his section is for qualified service personnel only. Read the Read Me First: Safety and Radio-Frequency Interference documen t included with your kit before using the power supply shuttle.
NI PXI-1045 Power Supply Sh uttle User Guide 4 ni.com Configuration The fan-speed selector switch is on the rear panel of the power supply shuttle. Refer to Fi gure 1 to locate th e fan-speed selector. Select HIGH for maximum cooling performance (reco mmended) or AUTO for quieter operation.
© National Instruments Corporation 5 NI PXI-1045 Power Supply Sh uttle User Guide Line regulation 3.3 V...................... ................. ......... < ± 1% 5 V...................... ................. ............ < ± 1% ± 12 V .........
NI PXI-1045 Power Supply Sh uttle User Guide 6 ni.com Maximum ripple and noise (20 MHz bandwidth) Over-curre nt protection ... ........... ............All outpu ts protected from short circuit and overload with automatic recovery when the short or overload is removed.
National Instruments™, NI™, and ni.com ™ are trad emarks of National Inst ruments Corporation. Product and company names mentioned herein are trademarks or trade names of their resp ective companies. For patents covering National Instrumen ts products, refer to the appropriate location: Help»P atents in your software, the patents.
An important point after buying a device National Instruments PXI-1045 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought National Instruments PXI-1045 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data National Instruments PXI-1045 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, National Instruments PXI-1045 you will learn all the available features of the product, as well as information on its operation. The information that you get National Instruments PXI-1045 will certainly help you make a decision on the purchase.
If you already are a holder of National Instruments PXI-1045, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime National Instruments PXI-1045.
However, one of the most important roles played by the user manual is to help in solving problems with National Instruments PXI-1045. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device National Instruments PXI-1045 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
