Instruction/ maintenance manual of the product PXI-1042 National Instruments
Go to page of 6
© 2002 National Instruments Corp. All rights reserved. National Instruments™, NI™, and ni.com ™ are trademarks of National Instruments Corporation. Product and company names mentioned herein are tradem arks or trade names of their respectiv e companies.
NI PXI-1042 Power Supply Shuttle User Guide 2 ni.com What Y ou Need to Get Started ❑ PXI-1042 chassis (the uni t being repaired) ❑ PXI-1042 power supply shuttle ❑ Read Me First: Safety and Radio-Frequency Interference ❑ NI PXI-1042 User Manual (provided with the chassis; also a v ailable at ni.
© National Instruments Corporation 3 NI PXI-1042 Power Supply Shuttle User Guide Installation and Maintenance The information in t his section is for qualified service personnel only. Read the Read Me First: Safety and Radio-Frequency Interference documen t included with your kit before using the power supply shuttle.
NI PXI-1042 Power Supply Shuttle User Guide 4 ni.com Configuration The fan-speed selector switch is on the rear panel of the power supply shuttle. Refer to Fi gure 1 to locate the f an-speed selector. Select HIG H for maximum cooling performance (recommended) or AUTO for qui eter operation.
© National Instruments Corporation 5 NI PXI-1042 Power Supply Shuttle User Guide Efficiency ............ .............. .............. ....... 70% typical Power disconnect ............................ ....... The AC power cable provides main power disconnect.
NI PXI-1042 Power Supply Shuttle User Guide 6 ni.com Over-voltage protectio n 3.3 V and 5 V............... .............. ......Clamped at 20 to 30% above nominal output voltag e +12 V and – 12 V ...... ........... ............Clamped at 26 to 29 V difference between +12 and – 12 V outpu ts Power supply shuttle MTTR .
An important point after buying a device National Instruments PXI-1042 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought National Instruments PXI-1042 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data National Instruments PXI-1042 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, National Instruments PXI-1042 you will learn all the available features of the product, as well as information on its operation. The information that you get National Instruments PXI-1042 will certainly help you make a decision on the purchase.
If you already are a holder of National Instruments PXI-1042, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime National Instruments PXI-1042.
However, one of the most important roles played by the user manual is to help in solving problems with National Instruments PXI-1042. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device National Instruments PXI-1042 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
