Instruction/ maintenance manual of the product NI PXI-1042 Series National Instruments
Go to page of 8
USER GUIDE NI PXI-1042 Series Power Supply Shuttle The NI PXI-1042 Series power supply shuttle is a replacement part for the NI PXI-1042 Series chassis. Introduction To minimize downtime cau sed by a power-supply failure, the NI PXI-1042 Series chassis has a modular p ower supply shuttl e.
NI PXI-1042 Series Power Supply Sh uttle User Guide 2 ni.com What Y ou Need to Get Started ❑ NI PXI-1042 Series chassis (the unit being repaired) ❑ NI PXI-1042 Series power supply shuttle ❑ Read Me First: Safety and Radio-Frequency Interference ❑ NI PXI-1042 User Manual (provided with the chassis; also a vailable at ni.
© National Instruments Corporation 3 NI PXI-1042 Series Power Supply Shuttle User Guide Installation and Maintenance The information in t his section is for qualified service personnel only. Read the Read Me First: Safety and Radio-Frequency Interference documen t included with your kit before using the power supply shuttle.
NI PXI-1042 Series Power Supply Sh uttle User Guide 4 ni.com Configuration The fan-speed selector switch is on the rear panel of the power supply shuttle. Refer to Fi gure 1 to locate the f an-speed selector. Select HIG H for maximum cooling performance (reco mmended) or AUTO for quieter operation.
© National Instruments Corporation 5 NI PXI-1042 Series Power Supply Shuttle User Guide Efficiency ............ ............ ..... .................. 70% typical Power disconnect .................... ............... The AC power cable provides main power disconnect.
NI PXI-1042 Series Power Supply Sh uttle User Guide 6 ni.com Over-curre nt protection ... ........... ............All outpu ts protected from short circuit and overload with automatic recovery Over-voltage protectio n 3.3 V and 5 V............... ....
© National Instruments Corporation 7 NI PXI-1042 Series Power Supply Shuttle User Guide Online Product Certification Refer to the product Declaration of Conformity (DoC) fo r additional regulatory compliance information. To obtain pro duct certifications an d the DoC for this product, visit ni.
National Instruments, NI, ni.com, and LabVIEW are tradem arks of National Instruments Corporation. Refer to t he Terms of Use section on ni.com/legal for more inform ation about Natio nal Instruments trademarks. Other product and compan y names mentioned herein are trademarks or trad e names of their respective companie s.
An important point after buying a device National Instruments NI PXI-1042 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought National Instruments NI PXI-1042 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data National Instruments NI PXI-1042 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, National Instruments NI PXI-1042 Series you will learn all the available features of the product, as well as information on its operation. The information that you get National Instruments NI PXI-1042 Series will certainly help you make a decision on the purchase.
If you already are a holder of National Instruments NI PXI-1042 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime National Instruments NI PXI-1042 Series.
However, one of the most important roles played by the user manual is to help in solving problems with National Instruments NI PXI-1042 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device National Instruments NI PXI-1042 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
