Instruction/ maintenance manual of the product NI PXI-1006 National Instruments
Go to page of 5
© 2003 National Instruments Corp. All rights reserved. National Instruments™, NI™, and ni.com™ are trademarks of National Instruments Corpor ation. Product and company names mentioned herein are trademarks or trade nam es of their re spective companies.
NI PXI-1006 Power Supply Shut tle User Guide 2 ni.com ❑ NI PXI -1006 User Manual (provided with th e chassis; also a vailable at ni.com/support ) ❑ No. 1 Phillips s crewdri ver Description Refer to Figure 1 to locate user-accessible components on the power supply shuttle.
© Nationa l Instrume nts Corpora tion 3 NI PXI-1006 Powe r Supply Shut tle User Guide Caution N ever connect the A C po wer cable to the power supply shuttle until you install it in a PXI-1006 chassis. Do not use, test, or conf igure the power supply shuttle outside of a chassis.
NI PXI-1006 Power Supply Shut tle User Guide 4 ni.com Connecting Saf ety Ground Caution Th e power supply shuttle is designed wi th a three-positio n NEMA 5-15 jack th at connects the g round line to the chassis ground .
© Nationa l Instrume nts Corpora tion 5 NI PXI-1006 Powe r Supply Shut tle User Guide DC Output Maximum usable power ................ ......... 600 W DC current capacity (I MP ) Load regulation Maximum ripple and no ise ........... ......... 1% ripple, 1% noise 20 MHz bandwi dth Over-current p rotection .
An important point after buying a device National Instruments NI PXI-1006 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought National Instruments NI PXI-1006 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data National Instruments NI PXI-1006 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, National Instruments NI PXI-1006 you will learn all the available features of the product, as well as information on its operation. The information that you get National Instruments NI PXI-1006 will certainly help you make a decision on the purchase.
If you already are a holder of National Instruments NI PXI-1006, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime National Instruments NI PXI-1006.
However, one of the most important roles played by the user manual is to help in solving problems with National Instruments NI PXI-1006. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device National Instruments NI PXI-1006 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center