Instruction/ maintenance manual of the product PTH38PSS, PTH38PCP, PTH38PGM Napoleon Grills
Go to page of 15
OFF H IGH Manual,Instructions & Parts List P A TIO HEA TER FOR YOUR SAFETY If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. if odor continues ,immediately call gas supplier . FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.
2 TOOLS AND P ARTS NEEDED FOR ASSEMBL Y TOOLS AND P ARTS NEEDED FOR ASSEMBL Y TOOLS N EEDED: 7/16 Wrench 3/8 Open End W rench Adjustable Opening Wrench, 8 Long Philips Head Screwdriver Leak Detection .
3 PA R T S PA R T S 15 17 1 Regulator 1 Cylinder (Not Supplied) 1 2 3 4 5 6 7 8 9 10 11 4 Reflector Cap 1 Head Assembly 1 Gas Hose 1 Post 1 Cylinder Cover 1 Cylinder Base 15 M6 Nuts 18 6mm W ashers 5 .
4 PRECAUTIONS PRECAUTIONS Do not use the heater in an explosive atmosphere. Keep the heater away from areas where gasoline or other flammable liquids or vapors are stored. Prior to use, check for damaged parts such as hoses, regulators, pilot or burner .
ASSEMBL Y FOR LIGHT SYSTEM ASSEMBL Y FOR LIGHT SYSTEM W ARNING: TO BE INST ALLED ONL Y BY AN AUTHORISED PERSON Instruction For Battery Installing Upon first time use of the product,please remove the ignition button and install an AAA battery as indicated.
6 ASSEMBL Y ASSEMBL Y NOTE: Assembly of this heater req uires basic mechanical skills. Pr oper assembly is the r esponsibility of the installer . Step 1 ---- Step 1 Step 2 ---- Step 2 M5 X 8 bolts (6 .
7 ASSEMBL Y ASSEMBL Y NOTE: Assembly of this heater req uires basic mechanical skills. Pr oper assembly is the r esponsibility of the installer . Step 3 ---- Attach Head Assembly to Post Load head assembly by inserting gas hose into post. Insert head assembly into post.
Step 5 ---- Attach Center Reflector to Reflector Attach center reflector to the top of reflector (4 pcs) by M6 X 10 mm screws (12 pcs) , Step 5 2 1 15 6mm washers (12 pcs) and nuts (12 pcs).
9 ASSEMBL Y ASSEMBL Y Step 7 Step 8 NOTE: Assembly of this heater req uires basic mechanical skills. Pr oper assembly is the r esponsibility of the installer . Step 7 ---- Connect Gas Line to Cylinder Step 8 ---- Check for leak Attach Gas hose to regulator with 3/8 Inch Open End Wrench and Adjustable Wrench.
10 ASSEMBL Y ASSEMBL Y Step 9---- Lower Cylinder Cover onto Cylinder Base Lower the cylinder cover onto the cylinder base . Step 9 6 8 W ARNING : TO BE INST ALLED ONL Y BY A COMPETENT PERSON Step 10---- Step 10 6 Disconnect Cylinder When Storing or Transporting 7 1).
OPERA TION OPERA TION W ARNING : DO NOT attempt to operate heater until you have read and understand all precautions. Failure to do so can result in serious personal injury , death or property damage. Before T urning Gas Supply ON Y our heater was designed and approved for OUTDOOR USE ONL Y .
OPERA TION OPERA TION OPERA TION OPERA TION CAUTION : A void inhaling fumes emitted from the heater's first use. Smoke and odor from the burning of oils used in manufacturing will appear . Both smoke and odor will dissipate after approximately 30 minutes.
13 LOCA TING HEADER FOR USE LOCA TING HEADER FOR USE Figur e 1 T his heater is primarily used for the heating of outdoor patios, decks, spas, pool and open working areas. Always make sure that adequate fresh air ventilation is provided. Follow the spacing tolerances shown in Figure 1.
14 MAINTENANCE/STORAGE MAINTENANCE/STORAGE MAINTENANCE : T o enjoy years of outstanding performance from your heater make sure you perform the following maintenance activities on a regular basis: Keep exterior surfaces clean. Use warm soapy water for cleaning.
15 TROUBLESHOOTING TROUBLESHOOTING PROBLEM PROBABLE CAUSE SOLUTION Pilot will not light Gas valve may be OFF T urn the gas valve ON Orifice blocked Clean or replace Orifice Air in supply system Purge .
An important point after buying a device Napoleon Grills PTH38PSS, PTH38PCP, PTH38PGM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Napoleon Grills PTH38PSS, PTH38PCP, PTH38PGM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Napoleon Grills PTH38PSS, PTH38PCP, PTH38PGM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Napoleon Grills PTH38PSS, PTH38PCP, PTH38PGM you will learn all the available features of the product, as well as information on its operation. The information that you get Napoleon Grills PTH38PSS, PTH38PCP, PTH38PGM will certainly help you make a decision on the purchase.
If you already are a holder of Napoleon Grills PTH38PSS, PTH38PCP, PTH38PGM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Napoleon Grills PTH38PSS, PTH38PCP, PTH38PGM.
However, one of the most important roles played by the user manual is to help in solving problems with Napoleon Grills PTH38PSS, PTH38PCP, PTH38PGM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Napoleon Grills PTH38PSS, PTH38PCP, PTH38PGM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
