Instruction/ maintenance manual of the product GL 2.5 Ariston
Go to page of 13
MTS MAKES USE OF RECYCLED P APER 029.1.60.542.1.0 5 1203 Lito g r af s . r .l. Jesi Controlled Energy Cor p . 340 Mad River P ark W aitsfield, VT 05673 866-330-2729 www .controlledenergy .com/tech COMMON SENSE HEA T & HOT WA TER TECHNOLOGY Merloni T ermoSanitari SpA Viale Aristide Mer loni, 45 60044 F abriano (AN) T el.
The installer should revie w the contents of this manual with the owner upon completion of installation, and the manual should be left with the owner and placed in a location close to the installation.
T emperature & pressure relief valve, 3/4 NPT male T emperature & pressure relief valve, 3/4 NPT male 3/4 NPT female tapping for relief valve 3/4 NPT female tapping 3/4 NPT female tapping 3/4 NPT female tapping for relief valve Hot water outlet 1/2 NPT male 3/4 NPT female tapping for relief valve FIG.
FIG. 2/1 DIMENSIONS FOR GL 2.5 - GL 4 DIMENSIONS FOR GL 6+ (HORIZONT AL INST ALLA TION) DIMENSIONS FOR GL 6+ (VERTICAL INST ALLA TION) FIG. 2/2 FIG. 2/3 3 GL 2.
General remarks The manuf acturer cannot be responsible f or the damages caused by improper installation or by f ailure to follo w instr uctions in this pamphlet. Comply with the installation instructions before completing electric connection. The thermostat has been pre-set at the factory between 41°C (105° F) and 45° C (113° F).
MODEL GL 2.5 - GL 4 The GL 2.5 and GL 4 water heater s can be installed under the sink. F asten the supplied mounting brack et to the wall. Use screws that are suitab le for the wall material and the weight of the heater . Hang the w ater heater on the brack et.
Heater can sit on floor . Connect the cold water inlet pipe to the inlet nipple (marked with a b lue r ing) and the hot water outlet pipe to the outlet nipple (marked with a red ring).
Maintenance instructions Note: Do not attempt to repair this water heater your self. Call a service person for assistance. Al ways turn off the power supply to the heater prior to servicing or draining the heater . P eriodic maintenance Note: For most of these operations, the water will ha ve to be drained from the heater .
Changing the anode rod REPLA CEMENT OF P AR TS B) Once the element has dried up, use a soft brush (non metallic to pre vent damaging the stainless steel sheath) on element. Brush the dried mineral off. Reinstall the element with gasket and mak e the wire connections.
9 W ater does not get hot Light not on Bro wn water Odor in water W ater is too hot W ater not hot enough Leaking T r oubleshooting 1. Make sure the pow er supply is on and working. 2. If light does not come on, check that the reset button is pushed in; follo w steps from previous section.
10.
ARIST ON • LIMITED 6 YEARS W ARRANTY CO VERA GE ARIST ON, THROUGH ITS U .S. DISTRIBUT OR BOSCH WATER HEATING.,(hereinafter BOSCH) guarantees this water heater to the Owner (hereinafter “Owner”) of the water heater at the original installation location against defects in material and workmanship for the periods specified below .
MTS MAKES USE OF RECYCLED P APER 029.1.60.542.1.05 1203 Litograf s .r.l. Jesi Merloni T ermoSanitari SpA Viale Aristide Mer loni, 45 60044 F abriano (AN) T el. 0732.6011 T elef ax. 0732.602331 http://www .mtsgroup.com E- ma il : ma rk et in g@ it .m ts gr ou p .
An important point after buying a device Ariston GL 2.5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ariston GL 2.5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ariston GL 2.5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ariston GL 2.5 you will learn all the available features of the product, as well as information on its operation. The information that you get Ariston GL 2.5 will certainly help you make a decision on the purchase.
If you already are a holder of Ariston GL 2.5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ariston GL 2.5.
However, one of the most important roles played by the user manual is to help in solving problems with Ariston GL 2.5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ariston GL 2.5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
