Instruction/ maintenance manual of the product TMP-2 Nady Systems
Go to page of 8
TMP-2 MIC PREAMP DUAL CHANNEL TUBE MIC PREAMPLIFIER OWNER’S MANUAL.
TMP-2 2 Dual Channel Tube Microphone PreAmplifier Date of Purchase ____________________________________ Dealer ’s Name ______________________________________ City ___________________________________.
IMPORT ANT SAFETY INSTRUCTIONS W ARNING A TTENTION : RISQUE DE CHOC ELECTRIQUE NE P AS OUVRIR An equilateral triangle enclosing a lightening flash/arrowhead symbol is intended to alert the user to the.
INST ALLA TION 4 T o ensure years of enjoyment from your NADY AUDIO TMP-2 please read and understand this manual thoroughly before using the unit. INSPECTION Y our TMP-2 was carefully packed at the factory in packaging designed to protect the units in shipment.
CONTROLS AND CONNECTORS 5 FRONT P ANEL Fr ont Panel (1) POWER SWITCH Use this switch to power unit ON or OFF . The integrated LED will light when the unit is ON. Before turning on this unit, verify connection to the proper voltage AC source, check all connections and turn down the level controls of equipment connected to the outputs.
6 (10) (11) (12) REAR P ANEL Rear Panel (10) A C PO WER CORD IEC CONNECTOR WITH INTEGRA TED FUSE HOLDER This standard IEC power cord receptacle is used to connect the AC power to your unit. It features a built-in fuse holder for a 5X20mm, 0.5A/250V slow-blow fuse.
The specifications abov e are correct at the time of printing of this manual. F or improvement purposes, all specifications f or t his unit, including design and appearance , are subject to change without prior notice.
SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-241 1, or e-mail at service@nady .com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product.
An important point after buying a device Nady Systems TMP-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nady Systems TMP-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nady Systems TMP-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nady Systems TMP-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Nady Systems TMP-2 will certainly help you make a decision on the purchase.
If you already are a holder of Nady Systems TMP-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nady Systems TMP-2.
However, one of the most important roles played by the user manual is to help in solving problems with Nady Systems TMP-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nady Systems TMP-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
