Instruction/ maintenance manual of the product XR-61 Nady Systems
Go to page of 10
NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET , EMER YVILLE, CA 94608 T el: 510.652.2411 • Fax: 510.652.5075 • www .nadywir eless.com Nady wireless systems are type accepted under FCC rules parts 90, 74, and 15. This device complies with RSS-210 of Industr y & Science Canada.
CONTENTS ........................................................................................2 INTRODUCTION ................................................................................3 SYSTEM FEA TURES ........................................
Thank you for purchasing a Nady XR Pro Series XR-61 Diversity Wireless Microphone System and congratulations on your choice. Also available is the XR-62, which is a single rackmount unit with dual receivers for operation of 2 channels simultaneously .
XR PRO SERIES OVERALL SYSTEM PERFORMANCE Frequency Response 25-20,000 Hz, +/-3dB Dynamic Range 120dB T otal Harmonic Distor tion <0.3% RF Carrier Frequency Range 169-216 MHz Frequency Stability +/- 0.005%, cr ystal controlled Modulation FM (F3E), +/-20KHz max.
38 43 41 44 42 40 39 45 36 37 XLR Connector – Connects microphone to the transmitter module for signal input Locking Ring – Locks microphone to the transmitter Optional Pouch – For lavalier body.
5. Connecting the Audio Output The XR-61 receiver provides both a fixed mic level BALANCED AUDIO OUTPUT XLR (10) and an adjustable line level UNBALANCED AUDIO OUTPUT 1/4” JACK (11) . The level from the UNBALANCED OUTPUT is controlled by the rear panel VOLUME CONTROL (12 ).
THE LINK 2™ PLUG-IN TRANSMITTER 1. T ransmitter Set-Up First, slide open the BA TTERY COMP ARTMENT DOOR (43) to expose compartment. Inser t a fresh 9V ALKALINE BA TTERY (45) , obser ving polarity .
31 30 30 32 33 34 32 35 13 WHT -15 HANDHELD MICROPHONE TRANSMITTER 1. Unscrew the BA TTERY COMP ARTMENT COVER (17) and remove, exposing the BA TTERY HOLDER (18) . Insert a fresh 9V ALKALINE BA TTERY (19) , obser ving the correct polarity as marked, and screw the cover back on to the microphone.
WGT -15 INSTRUMENT BODYP ACK TRANSMITTER 1. Snap open the BA TTERY COMP ARTMENT (30) and insert a fresh 9V BA TTERY (31) , obser ving the correct polarity . Close the compar tment. The WGT -15 is provided with a 3.5 mm LOCKING JACK (32) for connecting the INSTRUMENT CABLE (35) .
WL T -15 LA V ALIER/LAPEL OR HEADWORN MICROPHONE BODYP ACK TRANSMITTER 1. Snap open the BA TTERY COMP ARTMENT (22) and insert a fresh 9V BA TTERY (23) , obser ving the correct polarity . Close the compar tment. 2. The WL T -15 is provided with a 3.5 mm LOCKING JACK (24) for connecting the micro- phone.
An important point after buying a device Nady Systems XR-61 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Nady Systems XR-61 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Nady Systems XR-61 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Nady Systems XR-61 you will learn all the available features of the product, as well as information on its operation. The information that you get Nady Systems XR-61 will certainly help you make a decision on the purchase.
If you already are a holder of Nady Systems XR-61, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Nady Systems XR-61.
However, one of the most important roles played by the user manual is to help in solving problems with Nady Systems XR-61. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Nady Systems XR-61 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center