Instruction/ maintenance manual of the product 216THX NAD
Go to page of 2
216THX Stereo Power Amplifier • 2 x 125 W atts continuous power into 8ohms 2 x 200 W atts into 4ohms • Dynamic Power 170, 280, 400 W atts into 8, 4 and 2 ohms respectively • Low loss, massive Ho.
SPECIFICA TIONS - NAD 216THX Stereo Mode Continuous A verage Output Power 125W (21dBW) (Minimum power per channel, 20Hz-20kHz both channels driven, with no more than rated distortion) Rated distortion (THD 20Hz-20kHz) 0.03% Clipping power (maximum continuous power per channel) 160W IHF dynamic headroom at 8ohms +1.
An important point after buying a device NAD 216THX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought NAD 216THX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data NAD 216THX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, NAD 216THX you will learn all the available features of the product, as well as information on its operation. The information that you get NAD 216THX will certainly help you make a decision on the purchase.
If you already are a holder of NAD 216THX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime NAD 216THX.
However, one of the most important roles played by the user manual is to help in solving problems with NAD 216THX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device NAD 216THX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
