Instruction/ maintenance manual of the product 1370064 Myson
Go to page of 12
Installation, Operating, Maintenance and After Sales Manual. Product Serial Number: Please leave this manual with the end user . Part Number: 1370064 Issue 2 heating through innovation.
1.0 General Information 03 2.0 Heating System Design 03 3.0 Unit Selection/Sizing 03 4.0 Location 03 5.0 Preparation 04 6.0 Fixing 04 7.0 W ater Connections 05 8.0 Electrical Connection 06 9.0 Commissioning Procedur e 07 10.0 T echnical Data 08 11.0 Operating Instructions 09 12.
03 SLIM-LINE RC 1.0 General Information 2.0 Heating System Design G This MYSON SLIM-LINE RC fan convector is designed for wall mounted installation with a minimum installation height of 150mm to the underside of the unit. G The SLIM-LINE RC should only be used on closed circulation, two pipe, pump assisted central heating systems.
04 SLIM-LINE RC 5.0 Preparation Before pr oceeding with the installation, unpack the carton contents and check against the checklist below: 1. SLIM-LINE RC unit. 2. 15mm isolating valves (1 pair). 3. Instruction manual. 4. W arranty card. 5. Fixing kit (rubber mounts and cable gland).
05 SLIM-LINE RC 7.0 W ater Connections G Connect unit to system flow and return pipes using the two 15mm isolating valves (see fig. 2). Note: T o ensure ef fective venting of the heat exchanger the flow pipe should be connected to the bottom connection of the heat exchanger .
06 SLIM-LINE RC G This unit is supplied with factory fitted test leads. Remove these and discard. G A fused electrical spur with a maximum 3A fuse and a switch having 3mm separation on all poles must be provided in an easily accessible position adjacent to the unit.
07 SLIM-LINE RC 9.0 Commissioning Procedur e G Fill and vent the system. G Open both valves fully and vent air from the heat exchanger by unscrewing the air bleed valve situated above the valves in the angled top of the chassis. G Check for leaks at pipe connections.
T ested in accordance with BS 4856 Part 1. Flow rate 340 ltr/h (75 gal/h). Flow Rate Correction Factors: 455 ltr/h (100 gal/h) multiply by 1.03 227 ltr/h (50 gal/h) multiply by 0.
09 SLIM-LINE RC 11.0 Operating Instructions Description This SLIM-LINE RC unit is fitted with a control system that provides either automatic or manual contr ol of the unit.
Manual Manual mode can be used for air circulation without heat or for manual control of the heating function. Use ‘+’ to scroll Selected fan speed beyond 35°C displayed Or use ‘-’ to scroll below 15°C Scrolling back out of manual using the ‘+’ or ‘–’ button will r evert the unit back to last temperature set point.
11 SLIM-LINE RC 12.0 T roubleshooting (continued...) Common Installation Faults For optimum performance, this unit must be correctly sized to match the heat loss requir ements of the space it is requir ed to heat, and the heating system must be correctly designed to provide adequate flow of hot water to the unit (r efer to section 2).
heating through innovation. After Sales Service: MYSON Service, Somerden Road, Hull, East Y orkshire HU9 5PE T : 01482 713927, F: 01482 789056, service.convectors@myson.co.uk Spare parts and technical help on all Convector products ar e available from MYSON Service.
An important point after buying a device Myson 1370064 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Myson 1370064 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Myson 1370064 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Myson 1370064 you will learn all the available features of the product, as well as information on its operation. The information that you get Myson 1370064 will certainly help you make a decision on the purchase.
If you already are a holder of Myson 1370064, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Myson 1370064.
However, one of the most important roles played by the user manual is to help in solving problems with Myson 1370064. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Myson 1370064 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
