Instruction/ maintenance manual of the product MV900 MVOX electronics
Go to page of 16
MV900 User Manual.
T able of C onten ts T able of C ontents 1 1. Intr oduc tion 2 2. F unction Modes and Compatibility 2 3. Char ging 3 4. T urning on the MV900 3 5. Basic opera tions 3 6. Headset mode (Priv acy mode) 3 7. U sing as a USB Speakerphone 3 8. U sing with Desktop Phones 3 9.
2 1. Introduction Thank you f or purchasing the mV o x MV900 Bluetooth speaker phone . The MV900 is a true hands-free speakerphone with built-in DSP voice pr ocessing technology , user independent voic e dialing, and Bluetooth connectivity .
3 3. Charging T o charge the MV900, use the included AC adapter or c onnec t to a USB port on a computer . While the MV900 is charging , the charging indicator will show red . The indicator will turn green when the MV900 is fully char ged. Note: A bus-power ed USB hub cannot supply enough current for charging .
4 9. Using as a Bluetooth Speak erphone with Cell Phones Y ou will need to first pair the MV900 to your C ell phone before you can use the MV900 as a Bluetooth speakerphone. 1) Pair with a Bluet ooth Cell phone Note: After MV900 is turned on, the MV900 will voice prompt “Connecting” then tr y to connect to the last Cell phone paired .
5 10. Operations in Bluetooth mode F unc tion Receiving a call Rejecting a call Hang up a call T ransf er call to handset T ransf er call to speakerphone 1) Receiv e and reject an incoming call When you ha ve an incoming call y ou will hear the voice prompt “Incoming Call (012) 345-6789” .
6 11. Using the V oice Command Rec ognition and V oice Ke ypad ( VKP) T o get into the v oice command recognition mode , press and release the T alk Button, wait for the voic e prompt “Please Say Command .” Proceed b y saying one of the f ollowing commands.
7 Tips for using the V oic e Recognition and V oice K eypad • Say the command after you ha ve heard the beep • Say command or the numbers b y speak ing naturally . A void speaking too loud , too close to the microphone , or speak ing too slow . • Alway s say “zero ” for 0.
8 2) V oice K eypad Dialing Y ou can use the MV900 to dial the phone number . T o use the V oice Keypad press and release the T alk Button w ait for the voice pr ompt and say “Dial Number ” , now say the phone number y ou would like to dial.
9 4) Speed Dial T o use Speed Dial press and release the T alk Button sa y “Speed Dial X” , X being 1-9. Note: Speed Dial only works when you hav e setup Speed Dial on your Cell Phone.
10 6) Group Number Dialing Group number dialing will allow y ou to break up the telephone number into sever al groups to enter into the MV900. This is especially useful when using a calling card , or making long distance or international calls.
11 7) Entering T ouch T one Numbers After your call is connected or during an active call, you may need to dial extension, first press and hold the T alk button and make sure tha t you hold the talk button until y ou hear the voice prompt “Say Extension Number ” , release the talk button and say the e x tension numbers.
12 12. Setup Menu The MV900 pro vides memor y slots to use the V oice C ommand Dialing. Below is the list of the memor y slots: Number T yp e Commands in Setup Menu Command Home W ork V oicemail Home .
13 Below are the steps t o the ‘Caller ID’ setting. The same procedures ar e used for ‘Pr ompt ’ and ‘P ower-Sav e’ . Pr ess and release the T alk Button, say “Setup Menu” , then say “Caller ID” . MV900 will prompt the current mode (ON or OFF).
14 13. Regulatory Information This product was tested and c omplies with the limits for a Class B digital device under P ar t 15 of the U.S. F ederal Communications C ommission (FCC) rules , and is su.
http://www .mv ox.c om F or T ech Suppor t 1-866-811-3830 ©2005, mV ox Electronics, Inc..
An important point after buying a device MVOX electronics MV900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MVOX electronics MV900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MVOX electronics MV900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MVOX electronics MV900 you will learn all the available features of the product, as well as information on its operation. The information that you get MVOX electronics MV900 will certainly help you make a decision on the purchase.
If you already are a holder of MVOX electronics MV900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MVOX electronics MV900.
However, one of the most important roles played by the user manual is to help in solving problems with MVOX electronics MV900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MVOX electronics MV900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
