Instruction/ maintenance manual of the product LM-3000 Mustek
Go to page of 12
LM-3000 LCD MONITOR USER’S MANUAL.
SOME IMPORTANT NOTES FCC NOTICE This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications.
LM-3000 USER’S MANUAL - page 1 I. OVERVIEW LM-3000 is a highly luminant with low shadow effect 12.1” LCD monitor. It is economical of pace and provides broad display area almost compatible to that of a 14” CRT monitor for PC application.
LM-3000 USER’S MANUAL - page 2 IV. DISPL AY ADAPTOR CARD INS TALL ATION The attached PST032 is a PCI bus SVGA adaptor card which offers a 50 pin SCSI type connector for LM-3000 ( Do not connect any device other than the LM-3000 LCD monitor to this port even if it was using a SCSI connector! ) and a 3 x 5 D sub connector for external SVGA monitor.
LM-3000 USER’S MANUAL - page 3 V. CABLE CONNECTION Attention : Never connect the cable while power on! The cable length is 1.5 M, that allows the user to arrange the LM- 3000 at any place within this range from the PC.
LM-3000 USER’S MANUAL - page 4 VI. UTILITY INS TALL ATION A. For Windows 3.1 The drivers for Windows 3.1 are delivered in a separate 3.5” floppy diskette with the LCD monitor. To install the drivers for Windows 3.1 with the LCD monitor, the user should make sure that the Windows 3.
LM-3000 USER’S MANUAL - page 5 start with CHIPS followed by either the number 65550 or 6555X then followed by the matrix of resolution and colors. 17. Select Restart Windows to make the selected driver effective. B. For Windows 95 The following describes normal display driver installation procedures for Windows 95.
LM-3000 USER’S MANUAL - page 6 C. For Windows NT 3.5x The drivers for Windows NT of versions 3.5x are stored in a subdirectory named NT35 in the diskette. 1. Run Windows NT Setup from Main Group 2. Choose O ption from the menu (Alt-O) 3. Select C hange system setting (Alt-C) 4.
LM-3000 USER’S MANUAL - page 7 Step 3: Upon restart, select the desired display settings from the Display property dialog box. Click on Test to test the newly selected graphics mode. A color test screen should appear, followed by the Testing Mode window.
LM-3000 USER’S MANUAL - page 8 Swivel Tilt Contrast control knob Brightness control knob.
LM-3000 USER’S MANUAL - page 9 VIII. SPECIFIC ATION MODEL: LM-3000 Panel: 12.1 ” DSTN COLOR Max. Resolution: SVGA 800 x 600 Effective Display Area: 247.02 (W) x 185 .76 (H) mm Response Time: 250 ms Backlight: SIDE-EDGE TYPE CFL x 2 TUBES Polarizer: NON-GLARE TREATMENT Dot Size: 0.
LM-3000 USER’S MANUAL - page 10 DISCLAIMER The manufacturer of the LCD display system makes no representations or warranties, either expressed or implied, by or with respect to anything in this manual, and shall not be liable for any implied warranties of fitness for a particular purpose or for any indirect, special or consequential damages.
An important point after buying a device Mustek LM-3000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mustek LM-3000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mustek LM-3000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mustek LM-3000 you will learn all the available features of the product, as well as information on its operation. The information that you get Mustek LM-3000 will certainly help you make a decision on the purchase.
If you already are a holder of Mustek LM-3000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mustek LM-3000.
However, one of the most important roles played by the user manual is to help in solving problems with Mustek LM-3000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mustek LM-3000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
