Instruction/ maintenance manual of the product SP706030 Multiquip
Go to page of 64
OPERA TION MANUAL P/N 38260 THIS MANU AL MUST A CCOMP ANY THE EQ UIPMENT A T ALL TIMES. T o find the latest revision of this publication, visit our website at: www .
P A GE2 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) Engine exhaust and some of its constituents, and some dust created of California to cause cancer , birth defects and other repr oductive harm.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 3 Grinding/cutting/drilling of masonry , concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica. Silica is a basic component of sand, quartz, brick clay , granite and numerous other minerals and rocks.
P A GE4 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) T ABLE OF CONTENTS Specifications are subject to change without notice. SP7060 StreetPro Series Professional Pavement Saw Proposition 65 W ar ning ......................
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 5 NOTES.
P A GE6 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) TRAINING CHECKLIST This checklist lists the minimum requirements for machine maintenance and operation. Please feel free to detach it and make copies. Use this checklist when training a new operator or use as a review for more experienced operators.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 7 D AIL Y PRE-OPERA TION CHECKLIST COMMENTS: DAIL Y PRE-OPERA TION CHECKLIST t s i l k c e h C n o i t a r e p O - e r P y l i a D 1 . k c e h c e g a m a d d n a e r a w d r a H 2 .
P A GE8 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) SAFETY FOR Y OUR SAFETY AND SAFETY OF O THERS! Safety precautions should be followed at all times when operating this equipment. F ailure to read and understand the safety messages and operating instructions could result in injury to yourself and others.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 9 SAFETY CA UTION — Equipment Damage Hazards Other impor tant messages are provided throughout this manual to help prevent damage to your equipment, other proper ty or the surrounding environment.
P A GE10 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) RULES AND REGULA TIONS Whene v er necessar y , replace nameplate, operation and safety decals when they become difficult to read. AL W A YS check the equipment f or loosened threads or bolts bef ore star ting.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 11 RULES AND REGULA TIONS NEVER use fuel as a cleaning agent. AL W A YS store the equipment in a clean, dr y location out of the reach of children. NEVER r un engine without air cleaner or air filter .
P A GE12 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) RULES AND REGULA TIONS Always store equipment properly when not being used.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 13 RULES AND REGULA TIONS SA W LIFTING AND LO ADING SAFETY DO NO T use the handle bars and/or front pointer as lifting points. AL W A YS use ramps capab le of suppor ting the weight of the sa w and the operator to load and unload the sa w .
P A GE14 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) BA TTER Y The battery contains acids that can cause injury to the e y es and skin. T o av oid ey e irr itation, AL W A YS wear saf ety glasses or face shielding. Use well insulated gloves when picking the battery up.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 15 S N O I S N E M I D D N A S I S S A H C . 1 E L B A T E C N E R E F E R R E T T E L N O I T P I R C S E D S N O I S N E M I D ) m m ( . n i A ) d e s i a r r e t n i o P t n o r F ( t h g i e H x a M ) m m 5 3 3 1 ( .
P A GE16 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) G I J H K F S N O I T A C I F I C E P S T F A H S D N A E D A L B . 2 E L B A T y l b m e s s A t f a h S e d a l B g.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 17 ENGINE SPECIFICA TIONS S N O I T A C I F I C E P S M E T S Y S N O I S S I M S N A R T .
P A GE18 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) INTENDED USE Operate the SP7060 Multiquip Sa w , tools and components in accordance with the manuf acturer’ s instr uctions . Use of any other tools for stated operation is considered contrary to designated use.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 19 1 2 SERIAL T AG INFORMA TION Figure 3. Serial T ag/Locations SERIAL TA G The serial tag contains the model number and serial number of the saw .
P A GE20 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) CONTROLS AND INDICA TORS Figure 4. Controls and Indicators INCH MM 0 25 50 0 1 2 3 75 100 100 125 150 175 200 230 255.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 21 COMPONENTS Figure 5. Components 1. Fr ont P ointer Assembl y 2. Blade Wrench 3. Blade Shaft Pulley Guard 4. Blade Shaft Assembly 5. Blade Flange 6. Front Axle Assembly 7. Left Wheel Motor 8.
P A GE22 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) BASIC ENGINE INFORMA TION Figure 6. Basic Engine Components 17 7 9 10 13 16 5 6 12 14 8 4 1 3 11 2 18 15 BASIC ENGINE COMPONENTS The following refers to basic engine components and their functions that an operator ma y need to reference .
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 23 CHOOSING PROPER BLADE SIZE CHOOSING PROPER BLADE SIZE Proper blade selection is a product of: ■ Understanding the capabili.
P A GE24 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) Blade RPM vs. Surface Feet Per Minute (SFPM) When choosing a blade for your cutting conditions, follow the blade manufacturer's recommendations. Match the blade speed (Blade Shaft RPM) to the recommended blade Surf ace Feet P er Minute (SFPM).
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 25 SPECIFIC T OOLS T O BE USED This saw is to use tools (blades) as follows: Steel core segmented or continuous diamond rim cutting wheel Any other type of tool is not to be used.
P A GE26 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) INST ALLING THE BLADE INST ALLING THE BLADE The blade can be mounted on either side of the saw to accomodate diff erent cutting jobs. With the proper siz ed blade selected, reference the following procedure to install the new blade.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 27 INST ALLING THE BLADE CA UTION — Improper T orque An improperly torqued mounting bolt can cause the inside diameter of the blade, blade shaft, and flange b ushing to quic kly wear .
P A GE28 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) BLADE GUARDS BLADE GU ARD The blade guard can be mounted on either side of the saw to accomodate different cutting jobs.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 29 BLADE GUARDS Installing a Blade Guard Blade Guar ds with Standar d W ater Systems: 1. Slide the blade guard straight downward to engage the tapered mounting clip (Figure 16). 2 .
P A GE30 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) W A TER DELIVER Y SYSTEMS WA TER DELIVER Y SYSTEM 1. Connect the water supply hose to the water inlet (garden hose) fitting on the left side of the saw (Figure 5, Item 21).
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 31 ST A Y -LEVEL HANDLEBARS/BA TTER Y ST A Y-LEVEL HANDLEB ARS (SLH) T his saw incorporates a unique handlebar design that allows the handlebars to maintain a level height position regardless of the angle of the saw .
P A GE32 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) FUELING THE SA W FUELING THE SA W This sa w f eatures an 8-gallon, clear , molded plastic fuel tank for ease of checking the fuel level. It has a central drain and a shutoff v alve .
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 33 COLD WEA THER OPERA TION/POINTER ADJUSTMENT COLD WEA THER OPERA TION Block Heaters In e xtreme cold weather , optional b lock heaters ma y be used. Block heaters are installed directly onto the crankcase and are operated b y plugging into a 110V AC electrical outlet.
P A GE34 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) RAISE-LOWER CONTROLS Figure 27. Raise-Lo wer Control T oggle Switch IN C H INCH M M MM 0 2 5 25 5 0 50 0 1 2 3 7 5 75.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 35 BLADE SHAFT ENGAGE SYSTEM / WHEEL DRIVE SYSTEM 2 1 Figure 30. Blade shaft Engage/Disengage T o Re-adjust f or full cutting depth: 1 . Hold the raise/lower switch in the lowering position and rotate the depth control knob clockwise until the saw is fully lowered.
P A GE36 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) ST AR TING AND ST OPPING THE ENGINE OPERA TION W ARNING DO NO T lea v e the sa w unattended while the engine is r unning. NEVER star t, par k, or lea v e the sa w unattended on a slope.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 37 OPERA TION Stopping the Engine 1 . When finished with the cut, move the control handle to the NEUTRAL position. 2 . Raise the saw blade out of the cut. 3 . Reduce the throttle to idle.
P A GE38 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) LOADING AND TRANSPORTING LO ADING, UNLO ADING AND TRANSPOR TING THE SA W Loading and Unloading Tie-Down P oints The saw is provided with holes at each corner of the lower frame f or easy tie-down during transpor tation.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 39 MAINTENANCE W ARNING Cer tain maintenance operations or machine adjustments require specialized knowledge and skill.
P A GE40 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) MAINTENANCE t r a h C r e t l i F l i O d n a r i A . 9 e l b a T R E T L I F R E B M U N T R A P r e t l i F r i A y.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 41 MAINTENANCE Checking Engine Oil 1. Chec k engine oil le vel daily bef ore star ting the engine. 2. When checking or adding oil, place the machine so the engine is level. 3. Pull the engine oil dipstick from its holder (Figure 40, Item 10, Figure 40).
P A GE42 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) MAINTENANCE Fuel Filter (500 Hours) Replace the engine fuel filter (Figure 42) every 500 hours. Refer to your engine manual for specific details to perform this operation.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 43 MAINTENANCE COOLING SYSTEM The Deutz 2011 Series engine uses a robust, heavy duty oil cooler system to cool the engine. The cooling system will benefit from periodic inspection and cleaning.
P A GE44 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) MAINTENANCE Replacing the Battery 1 . Remove rear access panel. 2. Disconnect both negative battery cables first, then disconnect both positive battery cables to prevent arcing.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 45 MAINTENANCE BEL TS AND PULLEYS This saw uses a pair of Blade Shaft Drive Belts (5G 3VX 530) and a Hydrostatic Pump Belt (AX-35).
P A GE46 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) MAINTENANCE RO T AR Y BEL T TENSIONER The rotary belt tensioner system uses a 9/16"-headed nut and a 15/16" or 1" nut to set belt tension by positioning an arm between the tensioner pulley and the tensioner base.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 47 MAINTENANCE Removal and Replacement T o ensure correct blade shaft/wheel alignment, this operation should be performed by an authorized service center .
P A GE48 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) 3. Lock down the transaxle attachment bolts when the appropriate alignment distance is set. BLADE FLANGE REMO V AL/INST ALLA TION Correct removal or installation of the inner blade flange requires a flange puller (p/n 18503).
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 49 MAINTENANCE Installing the Inner Blade Flange 1 . Ensure that the tapered por tion of the blade shaft and the inner blade flange are clean and free of burrs or indentations. Clean and repair as necessar y .
P A GE50 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) CIRCUIT BREAKERS AND ST A RTER RELA YS Ther mal circuit break ers and glo w plug star ter rela ys are located behind the console access cover at the top of the console.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 51 MAINTENANCE PT O DRIVE MAINTENANCE Disassemb ly of the PT O dr iv e and replacement of the PT O drive shea v e/bear ing assembly requires the PT O bear ing puller , p/n 18610.
P A GE52 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) MAINTENANCE Raise-Lower System T r oubleshooting Refer to Figure 63 and the following table to assist in troubleshooting the raise-lower system. g n i t o o h s e l b u o r T m e t s y S r e w o L - e s i a R .
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 53 MAINTENANCE F-N-R CONTROL ADJUSTMENT Control (cable) adjustment for the F-N-R should not normally be necessar y; how e ver , some adjustment can be made on each of the rod end adjustment nuts.
P A GE54 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) MAINTENANCE DRAINING THE HYDRA ULIC SYSTEM 1. Place an oil pan beneath the Blade Shaft Housing (Figure 67, item 1). 2. Remove the drain plug from the bottom of the blade shaft housing (item 3) 3.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 55 MAINTENANCE Tips When Draining and Filling the Hydraulic Oil System 1. It will tak e 3-4 quar ts to fill the hydraulic system when new and somewhat less when changing the oil.
P A GE56 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) TROUBLESHOOTING (ENGINE) Certain operations referred to in this troubleshooting section such as re-seating valves or replacing piston rings may require special tools and must be performed by trained and competent personnel.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 57 ) D E U N I T N O C , E N I G N E ( G N I T O O H S E L B U O R T . 2 1 E L B A T M O T P M Y SE S U A C E L B I S S O PN O I T U L O S r e p o r p s i n o i s s e r p m o c ” r e w o p n i k a e W “ .
P A GE58 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) TROUBLESHOOTING (BLADE) G N I T O O H S E L B U O R T E D A L B . 3 1 E L B A T M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S .
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 59 NOTES.
P A GE60 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) I II III 0 I III III III II II 16 AWG Red/White 16 AWG Red/White 16 AWG Yellow/Blue 16 AWG Yellow/Blue 16 AWG Dark Gr.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 61 . . . . . . . . . . . . I II III 0 I III III III II II MP1 J10 J28 J27 G1 CR4 MOT2 J33 V1 SP1 P3 J40 SP3 SP2 P5 SS1 SP4 J45 .
P A GE62 — SP7060 P A VEMENT SA W • OPERA TION MANU AL — REV . #0 (02/13/09) HYDRAULIC SCHEMA TIC TO SN AF3700155 HYDRA ULIC SCHEMA TIC T O SN AF3700155 1. Lift Cylinder Assembly 2. Lift Pump 3. Reservoir 4. Blade Shaft Assembly 5. Brake Cylinder 6.
SP7060 PAVEMENT SAW • OPERATION MANUAL — REV. #0 (02/13/09) — PAGE 63 HYDRA ULIC SCHEMA TIC SN AF3700156 AND UP HYDRAULIC SCHEMA TIC SN AF3700156 & UP 1. Lift Cylinder Assembly 2. Lift Pump 3. Reservoir 4. Blade Shaft Assembly 5. Brake Cylinder 6.
OPERA TION MANUAL Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING © COPYRIGHT 2009, MUL TIQUIP INC . Multiquip Inc and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without w ritten per mission.
An important point after buying a device Multiquip SP706030 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multiquip SP706030 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multiquip SP706030 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multiquip SP706030 you will learn all the available features of the product, as well as information on its operation. The information that you get Multiquip SP706030 will certainly help you make a decision on the purchase.
If you already are a holder of Multiquip SP706030, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multiquip SP706030.
However, one of the most important roles played by the user manual is to help in solving problems with Multiquip SP706030. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multiquip SP706030 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
