Instruction/ maintenance manual of the product N/A Multiquip
Go to page of 96
Opera tiOn and p ar ts Manual THIS MANU AL MUST A CCOMP ANY THE EQUIPMENT A T ALL TIMES. T o find the latest revision of this publication, visit our website at: www .
P A GE 2 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) Engine exhaust and some of its constituents, and some dust created of California to cause cancer , birth defects and other repr oductive harm.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 3 Grinding/cutting/drilling of masonry , concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica.
P A GE 4 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) T ABLE OF CONTENTS NO TE: Specification and part number are subject to change without notice . Proposition 65 W ar ning .........................
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 5 P AR TS ORDERING PR OCEDURES www .multiquip .com Or dering par ts has never been easier! Choose.
P A GE 6 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) TRAINING CHECKLIST This checklist will lists some of the minimum requirements f or machine maintenance and operation. Please feel free to detach it and make copies.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 7 D AIL Y PRE-OPERA TION CHECKLIST COMMENTS: D AIL Y PRE-OPERA TION CHECKLIST T S I L K C E H C N O I T A R E P O - E R P Y L I A D 1 . l e v e l l i o e n i g n E 2 .
P A GE 8 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) SAFETY INFORMA TION Do not operate or ser vice the equipment bef ore reading the entire manual. Safety precautions should be f ollow ed at all times when operating this equipment.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 9 SAFETY INFORMA TION GENERAL SAFETY CA UTION NEV ER op er ate this equi pme nt wi tho ut pr .
P A GE 10 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) TR O WEL SAFETY D ANGER Engine fuel e xhaust gases contain poisonous carbon mono xide. This gas is color less and odor less, and can cause death if inhaled.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 11 NO TICE NEVER run engine without an air filter or with a dir ty air filter . Se v ere engine damage ma y occur . Ser vice air filter frequently to pre v ent engine malfunction.
P A GE 12 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) TRANSpOR TING SAFETY CA UTION NEVER allow any person or animal to stand underneath the equipment while lifting. Ride-on trowels are very heavy and awkw ard to mov e around.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 13 T railer should be adjusted to a le vel position at all times when towing. Raise and lock trailer wheel stand in up position when towing.
P A GE 14 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — SPECIFICA TIONS NO TE: 1. This v alue includes the seat height.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 15 HTH — GENERAL INFORMA TION HTH RIDE-ON TRO WEL F AMILIARIZA TION The HTH series Ride-On P ow er T rowels are designed f or the floating and finishing of concrete slabs.
P A GE 16 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — CONTR OLS AND INDICA T ORS 13. Radiator/Filler Cap – Holds coolant or water necessar y to keep engine at a safe operating temperature .
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 17 HTH — CONTR OLS AND INDICA T ORS 27. Oil Filter – Provides oil filtering f or the engine . 28. Retardant Spray Motor – Used with the spra y control button.
P A GE 18 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) This section is intended to assist the operator with the initial sta r t-up of th e HTH serie s Ri de-O n P o we r T row el. It is e xtreme ly impor tant that this section be read carefully bef ore attempting to use the trow el in the field.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 19 HTH — INITIAL ST AR T -UP 3. It is recommended that the kill switch be used to stop the engine after e very use. Doing this will verify that the s witch is working properly and presents no danger to the operator .
P A GE 20 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — INITIAL ST AR T -UP Figure 12. Blade Speed Control Foot P edal Figure 13. Joystick Contr ol Forwar d Direction Figure 14. Jo ystick Contr ol Rever se Direction g n i n o i t i s o P l a n o i t c e r i D k c i t s y o J .
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 21 HTH — MAINTENANCE NO TE See the engine manual supplied with your machine f or ap- propriate engine maintenance schedule and troubleshooting guide f or problems .
P A GE 22 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — MAINTENANCE Figure 16. Pump Actuation Lever s/Speed Control Rod Figure 17.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 23 HTH — MAINTENANCE Changing A Blade Whiteman recommends that all the blades on the entire ma- chine be changed at the same time.
P A GE 24 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — TR OUBLESHOO TING T roubleshooting (Ride-On Mechanical T rowel) Symptom P ossible Problem Solution Engine running rough or not at all. Stop switch malfunction? Make sure that the stop s witch is functioning when the operator is seated.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 25 HTH — TR OUBLESHOO TING T roubleshooting (Ride-On Mechanical T rowel) - continued Symptom P ossible Problem Solution Lights (optional) not working.
P A GE 26 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) The f ollowing section e xplains the diff erent symbols and remarks used in the P ar ts section of this manual. Use the help numbe rs f ound on the bac k page o f the manual if th ere are any questions .
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 27 HTH — SUGGESTED SP ARE P AR TS 1 to 3 Units Qty . P/N Description 4............. 0183 ....................... CO TTER PIN 6............. 10221 .
P A GE 28 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — LEFT/RIGHT PIV O T ASSY TORQUE TO 60 FT . LBS APPL Y LOCTITE. SEE P AGE 44 FOR HYDRAULIC MOTOR HOSE CONNECTIONS. PLACE FLUSH HEAD SCREW IN BACK OF MOUNT AS SHOWN.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 29 HTH — LEFT/RIGHT PIV O T ASSY.
P A GE 30 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — LEFT/RIGHT PIV O T ASSY NO P ART NO P AR T NAME QTY REMARKS 1 0166 A W ASHER, LOCK, 3/8 MED 10 2 0183 PIN, CO TTER 1/8 X 1 1/4 4 3 0448 W ASHER, FLA T , 7/16 SAE 4 4 10138 SCREW , SHS 1/4-20 X 1/2, N.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 31 HTH — NO TE P A GE.
P A GE 32 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — LEFT/RIGHT TWIN PITCH ASSY CONTINUED ON NEXT P AGE SEE , ITEM 32.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 33 HTH — LEFT/RIGHT TWIN PITCH ASSY CONTINUED FROM , ITEM 19 B A B CONTINUED FROM , ITEM 13 A 2.
P A GE 34 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — LEFT/RIGHT TWIN PITCH ASSY LEFT/RIGHT TWIN PITCH ASSY NO P ART NO P AR T NAME QTY .
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 35 HTH — LEFT/RIGHT TWIN PITCH ASSY LEFT/RIGHT TWIN PITCH ASSY NO P ART NO P AR T NAME QTY REMA.
P A GE 36 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — ENGINE (V ANGU ARD).
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 37 HTH — ENGINE (V ANGU ARD).
P A GE 38 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — ENGINE (V ANGU ARD) ENGINE ( V ANGU ARD) NO P ART NO P AR T NAME QTY .
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 39 HTH — NO TE P A GE.
P A GE 40 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — ENGINE (KUBO T A).
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 41 HTH — ENGINE (KUBO T A).
P A GE 42 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — ENGINE (KUBO T A) ENGINE (KUBO T A) NO P ART NO P AR T NAME QTY .
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 43 HTH — NO TE P A GE.
P A GE 44 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — ENGINE (KUBO T A) BELO W S/N JG53027 23 24 27 16 32 16 25 25 26 28 29 30 CANNISTER FUE.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 45 HTH — ENGINE (KUBO T A) BELO W S/N JG53027 ENGINE (KUBO T A) BELO W S/N JG53027 NO P ART NO P AR T NAME QTY .
P A GE 46 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — HYDRA ULIC STEERING ASSY.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 47 HTH — HYDRA ULIC STEERING ASSY HYDRA ULIC STEERING ASSY NO P ART NO P AR T NAME QTY .
P A GE 48 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — V AL VE ASSY (LEFT SIDE) 2 6 7 3 14 15 16 17 5 4 20 22 1 1 19 21 10 9 18 8 12 13 1 2 2 PORT "B" PORT "A" 1 3 2 4 4 5 5 6 7 8 7 7 6 6 3 TORQUE TO 48 + 5 FT .
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 49 HTH — V AL VE ASSY (LEFT SIDE) V AL VE ASSY (LEFT SIDE) NO P ART NO P AR T NAME QTY . REMARKS 11423 V AL VE ASSY 1 ........................... INCLS .
P A GE 50 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — V AL VE ASSY (RIGHT SIDE) V AL VE ASSY (RIGHT SIDE).
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 51 HTH — V AL VE ASSY (RIGHT SIDE) V AL VE ASSY (RIGHT SIDE) NO P ART NO P AR T NAME QTY . REMARKS 11422 V AL VE ASSY 1 ..................... INCLS.
P A GE 52 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — HANDLE ASSY (LEFT SIDE).
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 53 HTH — HANDLE ASSY (LEFT SIDE) HANDLE ASSY (LEFT SIDE) NO P ART NO P ART NAME QTY . REMARKS 1 11619 HANDLE ASSY , LEFT V AL VE 1 ...............
P A GE 54 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — HYDRA ULIC DRIVE ASSY.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 55 HTH — HYDRA ULIC DRIVE ASSY.
P A GE 56 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — HYDRA ULIC DRIVE ASSY HYDRA ULIC DRIVE ASSY NO P ART NO P AR T NAME QTY .
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 57 HTH — HYDRA ULIC DRIVE ASSY HYDRA ULIC DRIVE ASSY NO P ART NO P AR T NAME QTY .
P A GE 58 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — 4-BLADE SPIDER (LEFT) ASSY.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 59 HTH — 4-BLADE SPIDER (LEFT) ASSY 4-BLADE SPIDER (LEFT) ASSY NO P ART NO P AR T NAME QTY . REMARKS 1 11419 PLA TE, WEAR 1 2 11431 THR UST COLLAR W/BUSHING 1 .
P A GE 60 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — 4-BLADE SPIDER (RIGHT) ASSY.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 61 HTH — 4-BLADE SPIDER (RIGHT) ASSY 4-BLADE SPIDER (RIGHT) ASSY NO P ART NO P AR T NAME QTY . REMARKS 1 11419 PLA TE, WEAR 1 2 11431 THR UST COLLAR W/BUSHING 1 .
P A GE 62 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — CONVERSION 4-BLADE T O 5-BLADE The f ollowing is a mater ial par ts list f or those customers that want to con ver t from a 4-blade spider to a 5-b lade spider assembly .
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 63 HTH — NO TE P A GE.
P A GE 64 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — 5-BLADE SPIDER ASSY (LEFT) 2 3 4 1 1 1 3 4 RIGHT SIDE SPIDER ASSEMBL Y P/N 12046 INCLUDES ALL ITEMS WITHIN OUTLINE. P ART OF ITEM 16 (P/N1 1431) APPL Y LOCTITE P/N 1477 NOTES: TORQUE TO 90 FT .
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 65 HTH — 5-BLADE SPIDER ASSY (LEFT) 5-BLADE SPIDER ASSY (LEFT) NO P ART NO P AR T NAME QTY . REMARKS 1 12046 SPIDER ASM, LEFT SIDE 1 .............
P A GE 66 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — 5-BLADE SPIDER ASSY (RIGHT).
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 67 HTH — 5-BLADE SPIDER ASSY (RIGHT) 5-BLADE SPIDER ASSY (RIGHT) NO P ART NO P AR T NAME QTY . REMARKS 1 12047 SPIDER ASSY , RIGHT SIDE ..........
P A GE 68 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — ST ABILIZER RING ASSY ST ABILIZER RING ASSY.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 69 HTH — ST ABILIZER RING ASSY ST ABILIZER RING ASSY NO P ART NO P AR T NAME QTY . REMARKS 1 0161C W ASHER, LOCK, 5/16 MED 4 ............... QTY 5 For 5-Blade 2 1237 SCREW , SCH 5/16-18 X 7/8, NYL, NP 4 .
P A GE 70 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — T OP P ANEL (LEFT SIDE) T OP P ANEL (LEFT SIDE).
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 71 T OP P ANEL (LEFT SIDE) NO P ART NO P AR T NAME QTY . REMARKS 1 0161 C W ASHER, LOCK, 5/16 MED 2 5 0300 W ASHER, FLA T , 5/16 SAE 10 11 10019 NUT , NYLOC 10-32 10 .
P A GE 72 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — T OP P ANEL (RIGHT SIDE) T OP P ANEL (RIGHT SIDE) RIGHT SIDE (VIEW FROM DRIVERS SEA T).
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 73 T OP P ANEL (RIGHT SIDE) NO P ART NO P AR T NAME QTY .
P A GE 74 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — FR ONT P ANEL (RIGHT) (V ANGU ARD) FRONT P ANEL (RIGHT) (V ANGU ARD) DET AIL A 51 18 52 38 61 63 1 1 12 1 1 20 12 58 56 9 51 49 9 57 56 V ANGUARD ONL Y 18A CHOKE CABLE ASSY .
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 75 FRONT P ANEL (RIGHT) (V ANGU ARD) NO P ART NO P AR T NAME QTY .
P A GE 76 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — FR ONT P ANEL (RIGHT) (KUBO T A) DET AIL A 51 57 18 38 61 63 12 1 1 20 56 9 DET AIL A KUBOT A ONL Y 64 18A CHOKE CABLE ASSY ., CONNECT TO CARBURETOR LINKAGE.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 77 FRONT P ANEL (RIGHT) (KUBOT A) NO P ART NO P AR T NAME QTY .
P A GE 78 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — SEA T AND FRAME 14 59 28 16 27 5 32 37 36 61 4 HYDRO-ST A TIC DRIVE SEA T AND FRAME.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 79 SEA T AND FRAME NO P ART NO P AR T NAME QTY .
P A GE 80 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — FRAME AND FUEL T ANK 44 59 52 65 52 42 43 21 46 41 57 64 57 57 7 * * * * 40 45 4 4 55 34 47 16 3 28 3 4 24 4 CONNECT TO FUEL PUMP SEE SHEET XX.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 81 HTH — FRAME AND FUEL T ANK FRAME AND FUEL T ANK NO P ART NO P AR T NAME QTY .
P A GE 82 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — FOO T PED ALS RIGHT FRONT PEDAL FOR PEDAL MOUNTING HARDW ARE SEE DET AIL A, SHEET XX (.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 83 FOO T PEDALS NO P ART NO P AR T NAME QTY . REMARKS 6 0730 SCREW , HHC 1/4 – 20 X 1 11 9 1002.
P A GE 84 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — B A TTER Y BA TTERY RED CABLE ST ARTER BLACK CABLE POSITIVE NEGA TIVE 39 53 10 37 36 15 49 13 56 62 63 38 12 26 50 1 5 14 15 8 8 17 25 61 58 35 2 6 7 7 6 9 7 20 7 FOR SPRA Y ASSEMBL Y P ARTS BREAKDOWN SEE SHEET XX.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 85 HTH — B A TTER Y BA TTER Y NO P AR T NO P ART NAME QTY .
P A GE 86 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — SPRA Y ASSY 3 22 16 8 24 21 4 23 1 5 1 2 19 7 20 5 25 19 1 6 5 1 1 1 2 2 5 14 10 26 12.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 87 HTH — SPRA Y ASSY SPRA Y ASSY NO P ART NO P AR T NAME QTY .
P A GE 88 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — LIGHT ASSY LIGHT ASSY.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 89 HTH — LIGHT ASSY LIGHT ASSY NO P ART NO P AR T NAME QTY .
P A GE 90 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — E-Z MO VER AND LIFT HANDLE E-Z MO VER AND LIFT HANDLE.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 91 HTH — E-Z MO VER AND LIFT HANDLE E-Z MO VER AND LIFT HANDLE NO P ART NO P AR T NAME QTY .
P A GE 92 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) HTH — WIRING DIA GRAM (V ANGU ARD).
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 93 HTH — WIRING DIA GRAM (KUBO T A).
P A GE 94 — HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) TERMS AND CONDITIONS OF SALE — P AR TS P A YM ENT TERM S T erms of payment for par ts are net 3 0 days. FREIG HT POLICY Al l p ar t s o rd er s w il l b e s hi p pe d c o ll ec t o r prepaid with the charges added to the inv oice.
HTH-8 FT . RIDE-ON PO WER TRO WEL — OPERA TION AND P ARTS MANU AL — REV . #6 (02/22/11) — P A GE 95 NO TE P A GE.
Opera tiOn and p ar ts Manual Y our Local Dealer is: HERE’S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED ST A TES Multiquip Corporate Offi ce MQ P ar ts Department 18910 Wilmington A v e. Carson, CA 90746 Contact: mq@multiquip.
An important point after buying a device Multiquip N/A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multiquip N/A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multiquip N/A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multiquip N/A you will learn all the available features of the product, as well as information on its operation. The information that you get Multiquip N/A will certainly help you make a decision on the purchase.
If you already are a holder of Multiquip N/A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multiquip N/A.
However, one of the most important roles played by the user manual is to help in solving problems with Multiquip N/A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multiquip N/A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
