Instruction/ maintenance manual of the product FS3SP Multiquip
Go to page of 78
© COPYRIGHT 2002, MUL TIQUIP INC . P AR TS AND OPERA TION MANUAL CONCRETE SA W MODELS FS3SP MUL TIQUIP INC. P ARTS DEP AR TMENT : 18910 WILMINGTON AVE. 800-427-1244 CARSON, CALIFORNIA 90746 F AX: 800-672-7877 310-537-3700 SERVICE DEP ARTMENT/TECHNICAL ASSIST ANCE: 800-421-1244 800-478-1244 F AX: 310-537-3927 F AX: 310-631-5032 E-mail:mq@multiquip.
.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 3 HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING P AR TS DEP .
P A GE 4 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) T ABLE OF CONTENTS Here's How T o Get Help ........................................... 3 T able Of Contents ................................
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 5 P AR TS ORDERING PR OCEDURES Extra Fax Discount for Domestic USA Dealers Only Get special freight allo.
P A GE 6 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — SAFETY MESSA GE ALER T SYMBOLS Safety precautions should be followed at all times when operating this equipment.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 7 Accidental Starting FS3SP CONCRETE SA W — SAFETY MESSA GE ALER T SYMBOLS AL W A YS place the ON/OFF s witch in the OFF position, remove key and/or disconnect the spark plug lead before servicing the engine or equipment.
P A GE 8 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) Machine Safety Decals The FS3SP Ser ies concrete sa ws are equipped with a number of saf ety decals (Figure 1). These decals are provided f or operator saf ety and maintenance inf or mation.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 9 W ARNING: F ailure to f ollow instructions in this manual ma y lead to serious injur y or ev en death! This equipment is to be operated by trained and qualified personnel only! This equipment is f o r industrial use only .
P A GE 10 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) GENERAL SAFETY ■ AL W A YS read, understand, and follo w procedures in Operator’ s Manual bef ore attempting to operate equipment.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 11 Emergencies ■ AL W A YS kno w the location of the nearest fire extinguisher and first aid kit . Know the location of the nearest telephone. Also know the phone numbers of the nearest ambulance , doctor and fire depar tment .
P A GE 12 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — DIMENSIONS Figure 2.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 13 FS3SP CONCRETE SA W — WEIGHTS Figure 3. FS3SP Concrete Sa w W eights T ABLE 2 . W E I G HTS SA W DE SCR IP T I O N OP E RA TING W E IGHT Lbs. (k gs) F S 3 SP- 2 0 KE 1 4 S aw , 14" , S el f Prop, 20 H P K o hl er, E l ec .
P A GE 14 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — MAJOR COMPONENTS Figure 4.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 15 FS3SP CONCRETE SA W — MAJOR COMPONENTS BASIC UNIT , FS3 ASSY .
P A GE 16 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — CONSOLE COMPONENTS Figure 5 displays the location of the various operational control f eatures of the FS3SP saw . F eatures are dependent on the specific model saw selected.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 17 FS3SP CONCRETE SA W — B ASIC ENGINE COMPONENTS Figure 6. Engine Controls and Components INITIAL SER VICING The engine (Figure 6) must be checked for proper lubrication and filled with fuel prior to operation.
P A GE 18 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — ENGINE COMPONENTS 4 . Engine Oil – (See figure 7) A . Engine Oil Dip Stick ■ Remove the dipstick and wipe clean. ■ Fully inser t the dipstick; Then remo v e it to check the oil level.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 19 FS3SP CONCRETE SA W — GENERAL INFORMA TION PO WER PLANTS The FS3SP Series saws provides a variety of gasoline engine choices (T able 3).
P A GE 20 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) UNDER CARRIA GE SYSTEM A jig welded heavy steel gauge under carriage assembly supports the saw in tracking, pivoting and stabilization. A 1" diameter rear axle supports two solid rubber (10" x 2.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 21 FS3SP CONCRETE SA W — INSPECTION Before Starting 1 . Read safety instructions at the beginning of manual. 2 . Clean the SA W , remo ving dir t and dust, par ticularly the engine cooling air inlet, carb uretor and air cleaner .
P A GE 22 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — INSPECTION Hydr ostatic T ransmission - An EA T ON® Model 7 h ydrostatic transmission (Figure 9) provides the power for the saw's propulsion system.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 23 FS3SP CONCRETE SA W — INSPECTION -BLADE W ARNING F ailure to thoroughly inspect the diamond blade (.
P A GE 24 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — INSPECTION -BLADE PLA CEMENT ■ Place the console ON/OFF button in the OFF position. ■ Raise the saw to a high position by cranking the Raise/Lower handle in a counterclockwise direction.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 25 W ARNING Guards and Covers Check NEVER operate the saw without blade guards and covers (Figures 14 and 15) in place. DO NOT operate with the front of the blade guard r aised.
P A GE 26 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) 3. Chec k V -belt tension (Figure 18) b y using a tensionmeter (6.0 - 9.0 lbs.) against the inside belt at a mid point between the two pulleys, or by deflecting the center belt at a mid point 3/8” (10 mm) - 1/2” (13 mm).
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 27 CAUTION: D DO NOT attempt to operate the saw until the Saf ety , Gener al Inf or mation and Inspection sections have been read and understood. Depending on engine manuf acturer , oper ating steps ma y vary .
P A GE 28 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — INITIAL ST AR T -UP Stopping the Engine NEVER stop the engine while the blade is in the cut, except for extreme emergencies.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 29 FS3SP CONCRETE SA W — OPERA TION Saw Alignment 1. The FS3SP employs a front and rear pointer (Figure 24) that has been precisely aligned with the diamond blade at the f actor y .
P A GE 30 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) 3. Push the console engine ON/OFF button to the “ OFF ” position (Figure 5, item 1). 4 . Set the engine ON/OFF switch to the “ OFF ” position (Figure 6, item 3).
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 31 FS3SP CONCRETE SA W — MAINTENANCE CAUTION: General maintenance practices are crucial to the perf or mance and longe vity of y our saw .
P A GE 32 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) General T ransmission Care All FS3SP Models utilize spline gear wheel design coupled with an EA T ON Model 7 Hydrostatic T ransmission that provides f orw ard/re v erse propulsion.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 33 FS3SP CONCRETE SA W — MAINTENANCE Blade Shaft Bearing Replacement The FS3SP is supported by “tapped base lock collar (w/set screw)’ self-aligning blade shaft bearings.
P A GE 34 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — MAINTENANCE Drive V -Belt Chec k Operating the sa w with less than f .
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 35 NO TE P A GE.
P A GE 36 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) Ho w to read the marks and remar ks used in this par ts book. Section 1: Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusiv e) where a par ticular par t is used.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 37 FS3SP CONCRETE SA W 1 T O 3 UNITS 1 to 3 Units Qty .
P A GE 38 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — TR OUBLESHOO TING (ENGINE) T ABLE 7 . ENGIN E TROUBLESHOO TI NG SYMPTON POSSIBLE CAUSE SOLUTION Difficult to star t, "fuel is av ailable, b ut no SP AR K at sp ark plug" .
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 39 FS3SP CONCRETE SA W — TR OUBLESHOO TING (ENGINE) T ABLE 7. ENGINE TROUB LESHOO TI NG (CONTINUED) SYMPTO N POSSIBLE CA USE SOLUTION "W eak in power" com pressi on is prop er and do es not mis fi re.
P A GE 40 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — NAME PLA TE AND DECALS NAME PLA TE AND DECALS .
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 41 FS3SP CONCRETE SA W — NAME PLA TE AND DECALS NAME PLA TE AND DECALS N O P ART NO P ART NAME QTY . REMARKS 1 * 15578 DECAL: FS3 (WHITE) 2 2 * 15579 * DECAL: MQ WHITEMAN 5.
P A GE 42 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — UNDER CARRIA GE ASSY .
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 43 FS3SP CONCRETE SA W — UNDER CARRIA GE ASSY . UNDERCARRIA GE ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 10512 RING, SNAPTR U ARC #5100- 56 2 2 15028 SET COLLAR, 5/8 DIAMETER 2 3 15090 WHEEL, 5D X 2W X .
P A GE 44 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — REAR AXLE ASSY . 16 6 11 5 8 13 9 NOTES: 10 INCLUDED WITH SET COLLAR ITEM 5.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 45 FS3SP CONCRETE SA W — UNDER CARRIA GE ASSY . REAR AXLE ASSY .
P A GE 46 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — BLADE SHAFT ASSY . BLADE SHAFT ASSY .
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 47 FS3SP CONCRETE SA W — BLADE SHAFT ASSY . BLADE SHAFT ASSY . N O P AR T NO P A RT NAME QT Y . REMARKS 1 2621 ZERK FITTING 2 2 1162A C A P , ZERK FITTING 2 3 15119 K E Y , W OODR UFF #91, ANS1 #8061 2 4 6059B K EY , / 4 S Q .
P A GE 48 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — ENGINE MOUNT ASSY . ENGINE MOUNT ASSY .
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 49 FS3SP CONCRETE SA W — ENGINE MOUNT ASSY . MOUNT , ENGINE ASSY .
P A GE 50 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — POINTERS AND CO VERS ASSY .
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 51 FS3SP CONCRETE SA W — POINTERS AND CO VERS ASSY . POINTER FR ONT ASSY .
P A GE 52 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — W A TER SYSTEM ASSY . W A TER SYSTEM ASSY . CONNECT W A TER SOURCE HERE 3/8 DIA. HOSE 58 IN. (147.32 CM.) 3/8 DIA. HOSE 16 IN.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 53 FS3SP CONCRETE SA W — W A TER SYSTEM ASSY . FS3, W A TER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 15180 FITTING, STR 6 BARB- 1/2 MP 1 2 15181 HOSE, 3/8 BLA CK W A TER 200PSI 5.
P A GE 54 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — B ASIC PLA TFORM ASSY .
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 55 FS3SP CONCRETE SA W — B ASIC PLA TFORM ASSY . CO VER ASSY .
P A GE 56 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — BLADE MIST 20 -INCH ASSY .
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 57 FS3SP CONCRETE SA W — BLADE MIST 20 -INCH ASSY . GU ARD , BLADE 20” ASSY .
P A GE 58 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — MANU AL RAISE AND LO WER ASSY .
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 59 FS3SP CONCRETE SA W — MANU AL RAISE AND LO WER ASSY .
P A GE 60 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — PLUG KIT (PUSH) ASSY .
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 61 FS3SP CONCRETE SA W — PLUG KIT (PUSH) ASSY . PLUG KIT (PUSH) ASSY .
P A GE 62 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — PLUG KIT (SELF PR OPPELLED) ASSY .
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 63 PLUG KIT (SELF PR OPELLED) ASSY . N O P ART NO P A RT NAME Q TY . REMARKS 1 0916 SCREW , HHC RHM 1/4-20 X 3/4 2 2 0948 W ASHER, FLA T 2 3 10024 N UT , NYLOC 1/4-20 2 4 15340 PLUG, 0.
P A GE 64 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — B A TTER Y BO X ASSY .
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 65 FS3SP CONCRETE SA W — B A TTER Y BO X ASSY . BA TTER Y BO X ASSY . N O P ART NO P A RT NAME Q TY . REMARKS 1 15203 B A TTER Y HOLD DO WN 1 2 0948 W ASHER, FLA T 1/4" SAE 1 3 10024 N U T , NYLOCK 1/4 - 20 1 4 0471 B A T T E R Y , WET GR.
P A GE 66 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — PLA TFORM (B ARE) ASSY .
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 67 FS3SP CONCRETE SA W — PLA TFORM (B ARE) ASSY . PLA TFORM (BARE) ASSY .
P A GE 68 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — TRANSMISSION ASSY . TRANSMISSION ASSY . OVER TIGHTEN. IDLER PULLEY SHOULD BE FREE TO MOVE. DO NOT 1 1 ENGINE PULLEY IDLER PULLEY PUMP PULLEY USE LOCTITE P/N 60091 (BLUE).
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 69 FS3SP CONCRETE SA W — TRANSMISSION ASSY . HYDR OST A TIC DRIVE ASSY .
P A GE 70 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — TRANSMISSION ASSY . BRACKET FOUND ON RIGHT SIDE OF CONSOLE INTERIOR 1.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 71 FS3SP CONCRETE SA W — TRANSMISSION ASSY . HYDR OST A TIC THR O TTLE ASSY .
P A GE 72 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — ENGINE ASSY . ENGINE ASSY .
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 73 FS3SP CONCRETE SA W — ENGINE ASSY . ENGINE ASSY . NO P AR T NO P AR T NAME QTY . REMARKS 1 15729 ENGINE, K OHLER 20 HP W/CHARGE 1 1 15104 ENGINE, HOND A 20HP GX620TXF2 1 2 15743 TUBE, OIL DRAIN ASSY .
P A GE 74 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) FS3SP CONCRETE SA W — WIRING DIA GRAM. UNIT IGNITION COIL SP ARK PLUG UNIT IGNITION COIL SP ARK PLUG GRA Y GRA Y BRN/YEL WHT/BL WHT BL REGULA TOR/ RECTIFIER GRA Y GRA Y BLK/RED (PICK-UP COIL) WHT 12 AWG (BA TTER Y) NC CHASSIS GND.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 75 FS3SP CONCRETE SA W — WIRING DIA GRAM. 10 1 2 3 4 12 9 5 6 7 8 11 10 1 2 3 4 12 9 5 6 7 8 11 10 1 2.
P A GE 76 — MQ-WHITEMAN FS3SP CONCRETE SA W — P AR TS & OPERA TION MANU AL — REV . #0 (07/15/02) P A YMENT TERMS T er ms of pa yment f or par ts are net 10 days . FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice.
MQ-WHITEMAN FS3SP CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #0 (07/15/02) — PAGE 77 NO TE P A GE.
^^^^^*^^^^^^^^^^^^^^^^^^^^^^^^^*^6668 P AR TS AND OPERA TION MANUAL HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING P AR TS DEP AR TMENT 800-427-1244 or 310-5.
An important point after buying a device Multiquip FS3SP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multiquip FS3SP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multiquip FS3SP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multiquip FS3SP you will learn all the available features of the product, as well as information on its operation. The information that you get Multiquip FS3SP will certainly help you make a decision on the purchase.
If you already are a holder of Multiquip FS3SP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multiquip FS3SP.
However, one of the most important roles played by the user manual is to help in solving problems with Multiquip FS3SP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multiquip FS3SP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
