Instruction/ maintenance manual of the product BLW-400SSW Multiquip
Go to page of 138
© COPYRIGHT 2001, MUL TIQUIP INC . P AR TS AND OPERA TION MANUAL MUL TIQUIP INC. P ARTS DEP ARTMENT : 18910 WILMINGTON AVE. 800-427-1244 CARSON, CALIFORNIA 90746 F AX: 800-672-7877 310-537-3700 SERVICE DEP AR TMENT : 800-421-1244 800-835-2551 F AX: 310-537-3927 F AX: 310-638-8046 E-mail:mq@multiquip.
P A GE 2 — BL W -400SSW - WELDER/A C GENERA T OR — P AR TS & OPERA TION MANU AL — REV . #1 (06/15/01) Table of Contents.
BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV. #1 (06/15/01) — PAGE 3 HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING P AR TS DEP AR.
P A GE 4 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) T ABLE OF CONTENTS NOTE Specification and part number are subject to change without notice . Here’ s How to Get Help .....................
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 5 P AR TS ORDERING PR OCEDURES Get special freight allowances when you order 10 or more line items via F.
P A GE 6 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) RULES FOR SAFE OPERA TION F ailure to f ollow instructions in this manual ma y lead to serious injur y or e v en death! This equipment is to be operated by trained and qualified personnel only! This equipment is f or industrial use only .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 7 ■ This welder/AC generator is equipped with a ground terminal for your protection. Always complete the grounding path from the welder/AC generator to an external grounding source.
P A GE 8 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) OPERA TION AND SAFETY DECALS Table of Contents.
BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV. #1 (06/15/01) — PAGE 9 OPERA TION AND SAFETY DECALS P/N DCL160 Table of Contents.
P A GE 10 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW — SPECIFICA TIONS The maximum output of the engine listed above is applicable to supplying electrical power for continuous service at ambient conditions in accordance with SAE T est cord J607.
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 11 BL W -400SSW — GENERAL INFORMA TION BL W -400SSW F AMILIARIZA TION Generator The MQ P o wer Model B.
P A GE 12 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) Figure 1. BL W -400SSW Dimensions BL W -400SSW — DIMENSIONS Table of Contents.
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 13 Explanation of Chart: This section is intended to provide the user with trailer ser- vice and maintenance inf ormation. The ser vice and main- tenance guidelines referenced in this section apply a wide range of trailers.
P A GE 14 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) s n o i t a c i f i c e p S . 2 e l b a T L E D O M N O I T A C I L P P A L E U F L L E .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 15 ) t ' n o C ( s n o i t a c i f i c e p S . 2 e l b a T L E D O M R E L P U O C S E R I T S L E .
P A GE 16 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) Brakes If your trailer has a braking system, the brakes should be inspected the first 200 miles of operation. This will allow the brak e shoes and drums to seat proper ly .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 17 Tires/Wheels/Lug Nuts Tires and wheels are a v er y impor tant and critical components of the trailer . When specifying or replacing the trailer wheels it is impor tant the wheels, tires , and axle are properly matched.
P A GE 18 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) s t n e m e r i u q e R e u q r o T n o i s n e p s u S .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 19 BL W -400SSW — TRAILER-WIRING DIA GRAM Table of Contents.
P A GE 20 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) g n i t o o h s e l b u o r T e k a r B c i r t c e l E .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 21 BL W -400SSW — T O WING T o reduce the possibility of an accident while transpor ting the generator.
P A GE 22 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) Figure 6. Controls and Indicators BL W -400SSW — CONTR OLS AND INDICA T ORS Table of C.
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 23 BL W -400SSW — CONTR OLS AND INDICA T ORS Figure 6 shows the location of the controls and indicators . The functions of each control or indicator is described below .
P A GE 24 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW — OUTPUT TERMINAL O VER VIEW Figure 8.
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 25 BL W -400SSW — OUTPUT TERMINAL O VER VIEW Output T erminal P anel A vailab le V oltages The BL W -400SSW is a single phase generator only . It is able to supply both 120 volt and 240 volt.
P A GE 26 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW — INST ALLA TION Outdoor Installation Install the welder/AC generator in a location where it will not be e xposed to rain or sunshine.
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 27 General Inspection Prior to Operation The BL W -400SSW utilizes a welder/A C generator that has been thoroughly inspected and accepted prior to shipment from the f actor y .
P A GE 28 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) Lubrication Oil Fill the engine crankcase with lubricating oil through the filler hole, but do not overfill. Make sure the welder/AC generator is le v el.
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 29 BL W -400SSW — PRE-SETUP Operation in Freezing W eather When operating in freezing weather , be cer tain that the proper amount of antifreez e has been added.
P A GE 30 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW — LO AD APPLICA TION Single Phase Load Always be sure to check the namepl.
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 31 W elding Cables and P olarities Connect the welding cables (Figure 14) to the welder's output ter minals located on the control panel. The output ter minals have (+) and (-) polarities.
P A GE 32 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW — WELDER OPERA TING INSTRUCTIONS Duty Cycle The welder is rated at 100% duty cycle at 350 amps. Howe v er , the duty cycle depends upon the welding current and number of operators.
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 33 BL W -400SSW — ST AR T -UP INSTRUCTIONS ST AR T UP INSTR UCTIONS 1. Chec k the oil le v el bef ore star ting the engine. Replenish if necessar y . Use specified oil as indicated on page 28, T ab le 8.
P A GE 34 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) 8. T ur n the Automatic Idle Control s witch to the ‘ OFF ’ position (Figure 21). 9. Inser t the k e y into the star ter s witch and tur n the ‘ Run ’ position (Figure 22).
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 35 BL W -400SSW — SHUTDO WN INSTR UCTIONS Shutdown 1. Switch the circuit breakers to ‘ OFF ’ position (Figure 28. 2 . Switch the Idle Control s witch to ‘ OFF ’ position (Figure 29).
P A GE 36 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) General Inspection At least daily or prior to each use, the welder/AC generator should be cleaned and inspected for deficiencies. Check for loose, missing or damaged nuts, bolts or other fasteners.
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 37 Generator Storage For storage of the welder/AC generator for over 30 days, the following is required: ! Drain the fuel tank completely . ! Run the engine until all the gasoline is completely consumed.
P A GE 38 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW — GENERA T OR WIRING DIA GRAM SEE NEXT P A GE Table of Contents.
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 39 BL W -400SSW — GENERA T OR WIRING DIA GRAM SEE PREVIOUS P A GE Table of Contents.
P A GE 40 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW — ENGINE WIRING DIA GRAM Table of Contents.
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 41 BL W -400SSW — ENGINE WIRING DIA GRAM Table of Contents.
P A GE 42 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW — TR OUBLESHOO TING (ENGINE) Practically all breakdowns can be prevented .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 43 ) 2 T R A P ( G N I T O O H S E L B U O R T E N I G N E . 5 1 E L B A T M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S t o n s i n o i t u l o v e r e n i g n E .
P A GE 44 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW — TR OUBLESHOO TING (ENGINE) BL W -400SSW — TR OUBLESHOO TING (WELDER) ) 3 T R A P ( G N I T O O H S E L B U O R T E N I G N E .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 45 BL W -400SSW — TR OUBLESHOO TING (WELDER) G N I T O O H S E L B U O R T R E D L E W .
P A GE 46 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) EXPLANA TION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book.
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 47 BL W -400SSW W/KUBO T A V1205 DIESEL ENGINE 1 T O 3 UNITS Qty . P/N Description 1 ......... 0601840073 ..... RHEOST A T V OL T A GE REGULA T OR 1 ......
P A GE 48 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW --- GENERA T OR ASSY . GENERA T OR ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 49 NO . P AR T NO . ITEM QTY . REMARKS BL W -400SSW ---GENERA T OR ASSY . GENERA T OR ASSY . 1 7961000003 ROTOR ASSY 1 1-1 7961000003 FIELD ASSY . ........
P A GE 50 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW --- GENERA T OR ASSY . GENERA T OR ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 51 NO . P AR T NO . ITEM QTY . REMARKS BL W -400SSW ---GENERA T OR ASSY . GENERA TOR ASSY . 30 W1961324003 GROMMET 2 31 0017106016 HEX.HEAD BOL T 8 32 0010010035 HEX.
P A GE 52 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW --- CONTROL BO X ASSY . CONTROL BO X ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 53 NO . P AR T NO . ITEM QTY . REMARKS BL W -400SSW --- CONTR OL BO X ASSY . CONTROL BO X ASSY . 1 7961822703 CONTROL P ANEL 1 2 0021506030 MACHINE SCREW 2 3 0601803043 CURRENT RANGE SELECT OR .
P A GE 54 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW --- CONTROL BO X ASSY . CONTR OL BO X ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 55 NO . P AR T NO . ITEM QTY . REMARKS BL W -400SSW --- CONTROL BO X ASSY . CONTROL BO X ASSY . 0027103006 MACHINE SCREW 6 3 6 0601811034 RECEPT A CLE, A UX.
P A GE 56 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW --- CONTR OL P ARTS ASSY .
BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV. #1 (06/15/01) — PAGE 57 NO . P AR T NO . ITEM QTY . REMARKS BL W -400SSW --- CONTR OL P ARTS ASSY . (P ART 1) CONTR OL P AR TS ASSY . (P AR T 1) 1 8830200900 SLOW DOWN ..........
P A GE 58 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW --- CONTR OL P ARTS ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 59 NO . P AR T NO . ITEM QTY . REMARKS BL W -400SSW --- CONTR OL P ARTS ASSY . (P ART 2) CONTR OL P AR TS ASSY . (P AR T 2) 1 0601823820 CONTROL UNIT , THYRIST OR .
P A GE 60 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW ENGINE AND RADIA T OR ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 61 BL W -400SSW ENGINE AND RADIA T OR ASSY . NO . P AR T NO . ITEM QTY . REMARKS ENGINE AND RADIA TOR ASSY . 1 7960150004 ENGINE ..........................
P A GE 62 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW --- B A TTER Y ASSY . BA TTER Y ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 63 NO . P AR T NO . ITEM QTY . REMARKS BL W -400SSW --- B A TTER Y ASSY . BA TTER Y ASSY . 1 0160012100 B A TTER Y ...................................... 1 .
P A GE 64 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW --- MUFFLER ASSY . MUFFLER ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 65 NO . P AR T NO . ITEM QTY . REMARKS BL W -400SSW --- MUFFLER ASSY . MUFFLER ASSY . 1 7962310102 MUFFLER 1 2 0017108020 HEX. HEAD BOL T 6 3 7962350013 EXHA UST PIPE 1 4 0602320071 G A S K E T .
P A GE 66 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW --- FUEL T ANK ASSY . FUEL T ANK ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 67 NO . P AR T NO . ITEM QTY . REMARKS BL W -400SSW --- FUEL T ANK ASSY . FUEL T ANK ASSY . 1 7965510203 FUEL T ANK 1 0845500104 CA P , FUEL T ANK 1 0810105400 FUEL FIL TER 1 2 7965525102 B R A CKET , FUEL T ANK 1 3 0017108020 HEX.
P A GE 68 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) ENCLOSURE ASSY . BL W -400SSW --- ENCLOSURE ASSY .
BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV. #1 (06/15/01) — PAGE 69 NO . P AR T NO . ITEM QTY . REMARKS ENCLOSURE ASSY . BL W -400SSW --- ENCLOSURE ASSY . 1 7965111202 BASE 1 7965910104 LINING 1 2 7965118104 P ANEL 1 3 0017106016 HEX.
P A GE 70 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW --- RUBBER SEAL ASSY . R UBBER SEAL ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 71 NO . P AR T NO . ITEM QTY . REMARKS BL W -400SSW --- R UBBER SEAL ASSY .
P A GE 72 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) BL W -400SSW --- DECALS DECAL ASSY . Table of Contents.
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 73 NO . P AR T NO . ITEM QTY . REMARKS BL W -400SSW --- DECALS DECAL ASSY . 1 7960562002 P L A T E ; MAIN NAME LA TE .................................. 1 .
P A GE 74 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) KUBO T A V1205B --- CRANKCASE ASSY . CRANKCASE ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 75 NO . P AR T NO . ITEM QTY . REMARKS KUBO T A V1205B --- CRANKCASE ASSY . CRANKCASE ASSY . 010 1753801010 COMP . CRANKCASE ...................... 1 .....
P A GE 76 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) OIL P AN ASSY . KUBO T A V1205B --- OIL P AN ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 77 NO . P AR T NO . ITEM QTY . REMARKS OIL P AN ASSY . KUBO T A V1205B --- OIL P AN ASSY . 010 1628201500 COMP . OIL P AN 1 020 1629901620 GASKET , OIL P AN .
P A GE 78 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) KUBO T A V1205B --- CYLINDER HEAD ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 79 NO . P AR T NO . ITEM QTY . REMARKS KUBO T A V1205B --- CYLINDER HEAD ASSY . CYLINDER HEAD ASSY . 010 1624101750 HOOK, ENGINE 1 020 1624101770 HOOK, ENGINE 1 030 0112350814 B O L T 2 040 1624503040 COMP .
P A GE 80 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) KUBO T A V1205B --- GEAR CASE ASSY . GEAR CASE ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 81 NO . P AR T NO . ITEM QTY . REMARKS KUBO T A V1205B --- GEAR CASE ASSY . GEAR CASE ASSY . 010 1758204020 COMP . CASE, GEAR ...................... 1 ....
P A GE 82 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) KUBO T A V1205B --- MAIN BEARING CASE ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 83 NO . P AR T NO . ITEM QTY . REMARKS KUBO T A V1205B --- MAIN BEARING CASE ASSY . MAIN BEARING CASE ASSY . 010 1624104092 ASSY . CASE, MAIN BRG. 1 020 1624104540 B O L T , BEARING CASE 8 030 1626404360 GASKET , BRG.
P A GE 84 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) KUBO T A V1205B --- HEAD CO VER ASSY . HEAD CO VER ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 85 KUBO T A V1205B --- HEAD CO VER ASSY . HEAD CO VER ASSY .
P A GE 86 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) KUBO T A V1205B --- INLET MANIFOLD ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 87 NO . P AR T NO . ITEM QTY . REMARKS KUBO T A V1205B --- INLET MANIFOLD ASSY .
P A GE 88 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) KUBO T A V1205B --- EXHA UST MANIFOLD ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 89 KUBO T A V1205B --- EXHA UST MANIFOLD ASSY . EXHA UST MANIFOLD ASSY . NO . P AR T NO . ITEM QTY . REMARKS 010 1721512310 MANIFOLD , EXHA UST 1 020 1629912360 GASKET , EX-MANIFOLD .
P A GE 90 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) KUBO T A V1205B --- ROCKER ARM V AL VE ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 91 KUBO T A V1205B --- ROCKER ARM V AL VE ASSY . R OCKER ARM V AL VE ASSY .
P A GE 92 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) KUBO T A V1205B --- CAMSHAFT ASSY . CAMSHAFT ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 93 KUBO T A V1205B --- CAMSHAFT ASSY . CAMSHAFT ASSY . NO . P AR T NO . ITEM QTY . REMARKS 010 1526115550 T APPET 8 020 1624115110 PUSH ROD 8 030 1627116010 CAMSHAFT ASSY .
P A GE 94 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) KUBO T A V1205B--- PIST ON CRANKSHAFT ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 95 KUBO T A V1205B --- PIST ON CRANKSHAFT ASSY . PIST ON CRANKSHAFT ASSY . NO . P AR T NO . ITEM QTY . REMARKS 010 1622421110 PIST ON .....................
P A GE 96 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) KUBO T A V1205B --- FL YWHEEL ASSY . FL YWHEEL ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 97 KUBO T A V1205B --- FL YWHEEL ASSY . FL YWHEEL ASSY . NO . P AR T NO . ITEM QTY . REMARKS 010 1753825010 COMP . FL YWHEEL ......................... 1 ..
P A GE 98 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANU AL — REV . #1 (06/15/01) KUBO T A V1205B --- INJECTION PUMP ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 99 KUBO T A V1205B --- INJECTION PUMP ASSY . INJECTION PUMP ASSY . NO . P AR T NO . ITEM QTY . REMARKS 010 1627195690 JOINT 1 020 1624142010 FUEL PIPE ASSY .
P A GE 100 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- FUEL CAMSHAFT ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 101 NO . P AR T NO . ITEM QTY . REMARKS KUBO T A V1205B --- FUEL CAMSHAFT ASSY .
P A GE 102 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- NOZZLE HOLDER ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 103 KUBO T A V1205B --- NOZZLE HOLDER ASSY . NOZZLE HOLDER ASSY . NO . P AR T NO . ITEM QTY . REMARKS 010 1627142502 O VER FLO W PIPE ASSY . ..............
P A GE 104 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- IDLING APP ARA TUS ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 105 KUBO T A V1205B --- IDLING APP ARA TUS ASSY . IDLING APP ARA TUS ASSY . NO . P AR T NO . ITEM QTY . REMARKS 010 1625954090 IDLE APP ARA TUS ASSY . ....
P A GE 106 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- GO VERNOR ASSY . GO VERNOR ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 107 KUBO T A V1205B --- GO VERNOR ASSY . GO VERNOR ASSY . NO . P AR T NO . ITEM QTY . REMARKS 010 1628556480 S T A RT SPRING 1 020 1628556410 GO VERNOR SPRING 1 040 1625756052 FORK LEVER ASSY .
P A GE 108 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- SPEED CONTR OL PLA TE ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 109 SPEED CONTR OL PLA TE ASSY . NO . P AR T NO . ITEM QTY . REMARKS KUBO T A V1205B --- SPEED CONTR OL PLA TE ASSY . 010 1758257010 CONTROL PLA TE ASSY . .
P A GE 110 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- D YNAMO ASSY . D YNAMO ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 111 KUBO T A V1205B --- D YNAMO ASSY . D YNAMO ASSY . NO .
P A GE 112 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- W A TER FLANGE ASSY .
BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV. #1 (06/15/01) — PAGE 113 NO . P AR T NO . ITEM QTY . REMARKS KUBO T A V1205B --- W A TER FLANGE ASSY . W A TER FLANGE ASSY . 010 1622272700 COMP . FLANGE, W A TER 1 020 1624173340 PIPE, W A TER RETURN 1 040 1753883040 THERMOMETER SWITCH 1 060 1626472920 W A TER FLANGE GASKET .
P A GE 114 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- W A TER PUMP ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 115 KUBO T A V1205B --- W A TER PUMP ASSY . W A TER PUMP ASSY . NO . P AR T NO . ITEM QTY . REMARKS 010 1625973032 W A TER PUMP ASSY . ....................
P A GE 116 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- F AN ASSY . F AN ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 117 KUBO T A V1205B --- F AN ASSY . F AN ASSY . NO . P AR T NO . ITEM QTY . REMARKS 010 1727474110 F A N ................................................. 1 .
P A GE 118 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- RADIA T OR ASSY . RADIA T OR ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 119 RADIA T OR ASSY . NO . P AR T NO . ITEM QTY . REMARKS KUBO T A V1205B --- RADIA T OR ASSY . 010 1753872060 RADIA T OR ASSY . ..........................
P A GE 120 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- AIR CLEANER ASSY . AIR CLEANER ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 121 AIR CLEANER ASSY . NO . P AR T NO . ITEM QTY . REMARKS KUBO T A V1205B--- AIR CLEANER ASSY . 010 1753811010 AIR CLEANER ASSY . ..................... 1 .
P A GE 122 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- FUEL FIL TER COMPONENT ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 123 KUBO T A V1205B --- FUEL FIL TER COMPONENT ASSY . FUEL FIL TER COMPONENT ASSY . NO . P AR T NO . ITEM QTY . REMARKS 010 1758243010 FUEL FIL TER ASSY . .
P A GE 124 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- D YNAMO COMPONENT ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 125 KUBO T A V1205B --- D YNAMO COMPONENT ASSY . D YNAMO COMPONENT ASSY . NO . P AR T NO . ITEM QTY . REMARKS 010 1553164013 D YNAMO ASSY . ...............
P A GE 126 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- ST ARTER COMPONENT ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 127 KUBO T A V1205B --- ST ARTER COMPONENT ASSY . ST ARTER COMPONENT ASSY . NO . P AR T NO . ITEM QTY . REMARKS 010 1627163010 S T A R TER ASSY . .........
P A GE 128 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- NOZZLE HOLDER COMPONENT ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 129 NO . P AR T NO . ITEM QTY . REMARKS KUBO T A V1205B --- NOZZLE HOLDER COMPONENT ASSY . NOZZLE HOLDER COMPONENT ASSY . 010 1647553000 NOZZLE HOLDER ASSY .
P A GE 130 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- NOZZLE HOLDER COMPONENT ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 131 110# 1584198810 ADJUSTING W ASHER .................... 4 ........... 1.675MM 110# 1584198820 ADJUSTING W ASHER .................... 4 ........... 1.700MM 110# 1584198830 ADJUSTING W ASHER .
P A GE 132 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- INJECTION PUMP COMPONENTS ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 133 INJECTION PUMP COMPONENTS ASSY . NO . P AR T NO . ITEM QTY . REMARKS KUBO T A V1205B --- INJECTION PUMP COMPONENTS ASSY . 010 1628551010 INJECTION PUMP ASSY .
P A GE 134 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) KUBO T A V1205B --- A CCESSORIES A CCESSORIES ASSY .
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 135 A CCESSORIES ASSY . NO . P AR T NO . ITEM QTY . REMARKS KUBO T A V1205B --- A CCESSORIES 090 1753842500 O VER FLO W PIPE ASSY . .............. 1 ......
P A GE 136 — BL W -400SSW - WELDER/A C GENERA T OR — P ARTS & OPERA TION MANUAL — REV . #1 (06/15/01) P A YMENT TERMS T er ms of payment f or par ts are net 10 da ys. FREIGHT POLICY All parts orders will be shipped collect or prepaid with the charges added to the invoice.
BLW-400SSW-WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01) — PAGE 137 NO TE P A GE.
P AR TS AND OPERA TION MANUAL P AR TS AND OPERA TION MANUAL HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING P AR TS DEP AR TMENT 800/427-1244 or 310/537-3700 .
An important point after buying a device Multiquip BLW-400SSW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multiquip BLW-400SSW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multiquip BLW-400SSW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multiquip BLW-400SSW you will learn all the available features of the product, as well as information on its operation. The information that you get Multiquip BLW-400SSW will certainly help you make a decision on the purchase.
If you already are a holder of Multiquip BLW-400SSW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multiquip BLW-400SSW.
However, one of the most important roles played by the user manual is to help in solving problems with Multiquip BLW-400SSW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multiquip BLW-400SSW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
