Instruction/ maintenance manual of the product MT9234ZBA-V Multi-Tech Systems
Go to page of 38
MultiModem ® ZBA MT9234ZBA-Series MT9234ZBA MT9234ZBA-V User Guide.
2 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) MultiModem ZBA MT9234ZBA-Series User Guide MT9234ZBA, MT9234ZBA-V PN S000387A, Version A Copyright This publication may not be repro duced, in whole or in pa rt, without prior expressed written permission from Multi- Tech Systems, Inc.
Table of Contents Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 3 Table of Contents CHAPTER 1 – IN TRODUC TION .......................................................................................................................
Table of Contents 4 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) Fax Branding Statem ent ......................................................................................................... ..................... 30 Canadian Limita tions Notice .
Chapter 1 – Introduction Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 5 Ch apter 1 – Int r oduct ion Congratulations on your purc hase of the MultiModem ZBA modem.
Chapter 1 – Introduction 6 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) Technical Specifications The MT9234ZBA-Series mo dem meets t he following specifications: Trade Name MultiModem ® ZBA Model Number MT9234ZBA Build Number MT9234ZBA, MT9234ZBA-V Server-to-Client 56K speeds when accessing a V.
Chapter 1 – Introduction Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 7 Note: Any cables connected to the comput er should be shielded to reduc e interference. Diagnostics Po wer-on self test, local anal o g loop, local digital loop, remote dig ital l oop.
Chapter 3 – Operation 8 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) C hapter 2 – Inst al lat ion This chapter shows you step-b y-step how to set up your Multi-Tech MT 9234ZBA modem. Safety Warnings • Use this product only with UL- and CUL-listed computers ( U.
Chapter 3 – Operation Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 9 Location of the Jumpers Note: The Speaker Mode Jumper is fo r the Mo d em with the Voice Option Changing the Dial-U p/Leased-Line Jumper As shipped from the factory, your modem is configur ed for normal dial-up oper ation.
Chapter 3 – Operation 10 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) Step 2: Connect the Modem to Your PC Turn off your computer. Place the modem in a convenient lo cati on, and then connect it to your computer’s serial port, the telephone line or leas ed line, AC power, and, optionall y, your telephone.
Chapter 3 – Operation Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 11 Connect Speakers (Voice Option) For speakerphone or voice m ail applications, use a 1/8-inc h plu g male-to-male stereo patch cord to connect the SPKR jack on the side of the modem to the LINE IN jack on your sound card.
Chapter 3 – Operation 12 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 4. The Global Wizard dialog box appe ared. Click Next . 5. The Global Wizard searches for your modem and identifies it. Click Next . 6. Select the country/region in which the modem will be used.
Chapter 3 – Operation Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 13 Ch apter 3 – Oper at ion About the Front Panel The LED indicators on the front panel in dica te status, configuration, and activit y: TD – Transmit Data. Flashes when the modem is transmitting data to a nother modem.
Chapter 3 – Operation 14 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) Connecting to the Internet Your Multi-Tech modem is your gate way to the Internet and the World Wide Web. To access the Internet and Web via your modem, you must establi s h a dia l- up account with an Internet service prov id er (ISP).
Chapter 4 – Remote Configuration Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 15 Ch apter 4–R emote Conf ig ur at ion Remote configuration is a network man age ment tool that allo ws you to c onfigure MT9234Z BA modem s anywhere in your network from one location.
Chapter 5 – Callback Security 16 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) Ch apter 5 – Cal l back Se cur it y This chapter describes how to use callback securit y with your modem. Callback security protects your net work from unauthorized access and hel p s control long-di stance costs.
Chapter 5 – Callback Security Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 17 Setting Callback Security Message Parity The modem’s password prompt and mess ages p arity must matc h the parity of the computer to which the modem is connected.
Chapter 5 – Callback Security 18 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 5. After the delay specified by the #CBD n command, the callb ack modem calls the number associated with the password.
Chapter 5 – Callback Security Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 19 Direct Connection Use this procedure when you want to connect without fi rst being called back. The pas s word that you use must be set up for an optional direct connection.
Chapter 5 – Callback Security 20 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) Callback Assignments Form Location Password Telephone Number 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1.
Chapter 6– Troubleshooting Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 21 Chapter 6 – Troubleshooting Your modem was thoroughly tested at the factory before it was shipped.
Chapter 6 – Troubleshooti ng 22 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) • If the modem is on, the cable is plugged into the co rrect port, the communic ation software is configured correctly, and you still don’t get an OK , the fault might be in the serial cable.
Chapter 6– Troubleshooting Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 23 The Modem Disconnects While Online • If you are not using Modem on Hold, Call Waiting can i nte rrupt your connection when someon e tries to call you. If you have Call Waiting servic e, disable it before each ca ll.
Chapter 6 – Troubleshooti ng 24 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) Data Is Being Lost • If you are using data compression and a h igh speed serial por t, set the serial p ort bau d rate to t wo to six times the data rate.
Chapter 7– Warranty, Service, & Technical Support Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 25 Chapter 7 – W arrant y , Ser vice, and T e chnical Suppor t Multi-Tech Warranty Statement Multi-Tech Systems, Inc.
Chapter 7 – Warranty,Service , & Technical Support 26 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) number. If the product is out of warranty, a payment in adv ance is required. Accptable means of payment include credit card, wire transfer or a check in U.
Appendix A – Upgradi ng the Modem’s Firmware Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 27 Appendix A – Upg r ading the Modem ’ s Firm w ar e Your modem is controlled by semi-perm an ent software, called firmware , which is stored in flash memory.
Appendix A – Upgr adi ng Your Modem’s Fir m ware 28 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) Step 4: Extract the Upgrade Files 1. Install the Flash Wizard utility by doubl e-clicking the file name in Wind ows Explorer. 2. Extract the upgrade files by double-clicki ng th e file name.
Appendix B – Regulator y Compliance Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 29 Appendix B – Regu lator y Compliance FCC Part 15 Regulation This equipment has bee n tested an d found to comply with the limits for a Class B digital devic e, pursuant to Part 15 of the FCC rules.
Appendix B – Regulator y Compliance 30 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) Fax Branding Statement The Telephone Consum er Pro tection Act of 1991 makes it unlaw ful for .
Appendix B – Regulator y Compliance Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 31 International Modem Restrictions Some dialing and ans wering defaults and restrictions may va ry for internationa l modems. Changing settings may caus e a modem to become non-compliant with national telecom requirem ents in specific countries.
Appendix B – Regulator y Compliance 32 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) Appendix C – W aste Elect r ical and Elect ronic Equipment WEEE (Waste Electrical and Electr.
Appendix D – Installing a Mo d em under Linux Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 33 Appendix D – Inst al ling a Modem under Linux This appendix expl ains how to install a modem on a computer oper ating under the Red Hat Linux 6.
Appendix E – Connectin g to a Cisco R outer 34 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) Appendix E – Conne ct ing to a Cisco R outer Connecting to a Cisco Router Console Port The console port on the Cisco IOS ® router is an asynchr onous serial port configured as data communications equ ipment (DCE).
Appendix E – Connectin g to a Cisco R outer Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 35 Step 3: Console Port Final Setup Send the following command string to the modem co nn .
Appendix E – Connectin g to a Cisco R outer 36 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) Appendix F – C -R OHS HT/TS Substa nc e Concentration 依照中国标准的有毒有.
Index Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) 37 Inde x A AT commands &D ...................................................................................13 &F ........................................................
Index 38 Multi-Tech Systems, Inc. MT9234ZBA-Ser ies User Guide (S000387A) S Safety ..................................................................................... 8 Serial Cable ...................................................................
An important point after buying a device Multi-Tech Systems MT9234ZBA-V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multi-Tech Systems MT9234ZBA-V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multi-Tech Systems MT9234ZBA-V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multi-Tech Systems MT9234ZBA-V you will learn all the available features of the product, as well as information on its operation. The information that you get Multi-Tech Systems MT9234ZBA-V will certainly help you make a decision on the purchase.
If you already are a holder of Multi-Tech Systems MT9234ZBA-V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multi-Tech Systems MT9234ZBA-V.
However, one of the most important roles played by the user manual is to help in solving problems with Multi-Tech Systems MT9234ZBA-V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multi-Tech Systems MT9234ZBA-V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
