Instruction/ maintenance manual of the product FF100 Multi-Tech Systems
Go to page of 12
FF100 V.34 Fax Server Cabling Guide.
2 MultiTech Systems, Inc. FaxFinder Model FF100 V.34 Fax Server Cabling Guide P/N 82010322L, Revision C Copyright © 2006 by Multi-Tech Sy stems, Inc. All rights reser ved. This publication may not be reproduced, in whole or i n part, without prior expressed wri tten permission from Multi-Tech Systems, Inc.
FaxFinder Cablin g Guide Getting Started MultiTech Systems, Inc. 3 Introduction This guide describes the har dware setup of the FF100 FaxFinder unit, that is, how to connect its cables for operation, and some preliminary considerati ons for its inter-operation w ith PBX units.
Getting Started FaxFinder Cab ling Guide 4 MultiTech Systems, Inc. We Supply • An FF100 FaxFinder with factory-installed softw are • A set of four self-adhesive plastic feet • One mounting brack.
FaxFinder Cabling Guide Application Considerations MultiTech Systems, Inc. 5 PBX Compatibility Before proceeding with cabling or softw are installation, you should confirm that the tel ephony equipment w ith which y ou intend to use the FaxFinder is co mpatible with it.
Application Co nsiderations FaxFinder Cab ling Guide 6 MultiTech Systems, Inc..
FaxFinder Cabling Guide Application Considerations MultiTech Systems, Inc. 7 If the FaxFinder is connected to a PBX station port and that PBX can route multiple phone extens ion numbers to the FaxFinder, then each user can have his/her own incoming fax number and faxes will go directly to each user’s email address.
Cabling Instructions FaxFinder Cabling Guide 8 MultiTech Systems, Inc. Cabling Process Part A: Connect the FaxFinder to Power Outlet and Ethernet Summary : Place the FaxFinder in a convenient location, and then connect it to your AC pow er outlet and Ethernet.
FaxFinder Cabling Guide Cabling Instructions MultiTech Systems, Inc. 9 2.Verify powering. After power is applied, there is a 4-second delay before the PWR LED comes on. In normal operation, the PWR LED w ill be flashing. When you apply pow er, the FaxFinder performs a diagnostic self-test.
Cabling Instru ctions FaxFinde r Cabling Guid e 10 MultiTech Systems, Inc. 3. Connect FaxFinder to Ethern et Netw o rk. Plug one end of your RJ45 ethernet cable into the FaxFinder’s ethernet jack and the other end into your netw ork ethernet hub. This ethernet cable is not included with your FaxFinder unit.
FaxFinder Cabling Guide Cabling Instructions MultiTech Systems, Inc. 11 Part B: Connect to Telephony Service The FF100’s fax modem can either be connected to a PBX (for use in PBX Routing Mode ) or to a POTS line (for use in POTS Mode ).
Patents This device is covered by one or mo re of the following patents: 6,031,867; 6,012,113; 6,009,082; 5,905,794; 5,864,560; 5,815,567; 5, 815,503; 5,812,534; 5,809,068; 5,790,532; 5,764,628; 5,764.
An important point after buying a device Multi-Tech Systems FF100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multi-Tech Systems FF100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multi-Tech Systems FF100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multi-Tech Systems FF100 you will learn all the available features of the product, as well as information on its operation. The information that you get Multi-Tech Systems FF100 will certainly help you make a decision on the purchase.
If you already are a holder of Multi-Tech Systems FF100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multi-Tech Systems FF100.
However, one of the most important roles played by the user manual is to help in solving problems with Multi-Tech Systems FF100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multi-Tech Systems FF100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
