Instruction/ maintenance manual of the product ACP-300 Multi-Link
Go to page of 6
(ACP-300, ACP-500 & ACP-900) Programming Manual Toll Free Sales and Tech Support 866.337.0965 International Sales and T ech Support 217.337.0965 techsupport@faxswitch.com | www.faxswitch.com __________________ _____________________ _______________ The ACP can be easily tailored to fit t he needs of individual organizations or departments.
In the absence of Fax tones or security codes, the ACP begins to ring the call through to its default port (Device 1). Outgoing calls can be placed from any devic e port as if it were attached to a dedicated line. Only one device at a time can actively use the telephone line.
Flag 6 (Bit 2) Busy Signal 1 (on) Determines if a device trying to access the line when the line is already in use will hear a bu sy tone or dead air. Flag 7 (Bit 1) Enable Mult i-Port Polling 0 (off) Allows transfer to another device when communication with the first device add ressed is complete.
When programming this register, you must en ter all Flag (Bit) values. The flags are preset to the following: Flag 1 (Bit 3) Device 4 Barge-in Mask 0 (off) Flag 2 (Bit 2) Device 3 Barge-in Mask 0 (off.
REGISTER 15 Security Access Code for Device Port 5 Contains the security access code for devic e port 5. This register holds up to 7 digits ranging from 0 to 9, * and #. Factory preset to 55. REGISTER 16 - Multiple Polling Code This register contains the multiple polling code (MPC).
TO READ VALUES FROM MEMORY To read all values, press 99 on your te lephone key pad. To read the value of a single register, press * and the two-digit register number. TO WRITE PROGRAMS TO MEMORY Press 80 on your telephone key pad. Th is should always be done when you are satisfied with the inform ation you have programmed.
An important point after buying a device Multi-Link ACP-300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Multi-Link ACP-300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Multi-Link ACP-300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Multi-Link ACP-300 you will learn all the available features of the product, as well as information on its operation. The information that you get Multi-Link ACP-300 will certainly help you make a decision on the purchase.
If you already are a holder of Multi-Link ACP-300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Multi-Link ACP-300.
However, one of the most important roles played by the user manual is to help in solving problems with Multi-Link ACP-300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Multi-Link ACP-300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
