Instruction/ maintenance manual of the product DV2007 ASA Electronics
Go to page of 18
MUTE MODE MENU STOP RPT DVD AUDIO RDM OSD SET UP REL DVD PLA YER / RECEIVER I DV2007 D V2007 Inst allation and Operation Manual CD / MP3 / WMA / DVD PLAYER / RECEIVER For Evaluation Only. Copyright (c) by Foxit Software Company, 2004 Edited by Foxit PDF Editor For Evaluation Only.
DV2007 2 SAFETY INFORMA TION When Driving Keep the volume level Iow enough to be aware of the road a nd traffic conditions. When Washing your V ehicle Do not expose the product to water or excessiv e moisture. Moisture can cause electrical shorts, fire or other damage.
DV2007 3 Disc Maintenance Before playing, wipe the disc using a clean cloth, working fro m the center hole towards the outside edge. Never use benzene, thinners, cl eaning fluids, anti-static liqui ds or any other solvent.
DV2007 4 recheck all wiring until the problem is corrected . Once proper operation is achieved, turn the ignition switch off and proceed wi th final mounting of the chassis. 8. Carefully slide the radio into the mounting sleev e making sure it is right-side-up until it is fully seated and the spring clips lock it into place.
DV2007 5 WIRING Audio/Video Connections Power/Speaker C onnections SUB WOOFER SUB-W OUT SUB-WOOFER OUTPUT BLUE EXTERNAL REMOTE JACK PINK REMOTE VIDEO IN VIDEO (1) INPUT YELLOW AUDIO IN R AUDIO (1) INP.
DV2007 6 BASIC OPERATION Control Panel Release (REL) Press the REL button (3) to remove the control panel. Power On/Off ( ) Press the button (1) or any other button on the front of the unit (except open/eject) to turn the unit ON. Press the button to turn the un it OFF .
DV2007 7 • Local / Distance Selector : Use the volume control knob to choose b etween Local or Distance mode. This feature is used to desi gnate the strength of the signa ls at which the radio will stop during automatic tuning. "Distanc e" is the default setting, allowing the radio to stop at a broader range of signals.
DV2007 8 T UNER OPER ATION Select a Band Press the B button (19) on the control panel (or the 0/BAND b utton on the remote control) to change between three FM bands and two AM bands.
DV2007 9 IPOD OPER ATION Accessing iPod Mode This unit is equipped with an iPod ready function t hat will allow you to control your iPod (if compatible) using the control panel control butt ons. The following iPod versions are supported: • iPod 3G (firmware version 2.
DV2007 10 AUDIO CD OPERATION When an audio CD is inserted into the player , the following image will appear on the TF T monitor . 1. Disc T y pe 2. Content List 3. Playing Mark 4. Program Mode 5. Program Memory Play List 6. Playing S tatus (play , resume stop, clear stop, pause, random) 7.
DV2007 11 PR OGRAMMED MEMORY PLAYBACK The DV2007 allows you to store CD, MP3 or WMA trac ks in a favorites p laylist for easy recall. Menu Button Functions Y ou can use the following control panel buttons to navigate the on-screen menu s. • Use the volume control knob (6) t o move the cursor up/down and highlight fields.
DV2007 12 MP3/WMA OPERATION MP3 and WMA (Windows Media Audio) music files are digital audio files that are compressed to allow more files on a single CD . This unit can play MP3/WMA directly from files contained on a CD-R/RW using the buttons on the receiver (o r optional remote) as described b elow .
DV2007 13 D VD OPERATION Once a DVD disc is inserted into the un it, the unit will automatically start playback from the beginning of the disc. The DVD MENU, ROOT or T ITLE of the DVD disc will appear on the TFT monitor and “ROOT” will be displayed on the LCD panel.
DV2007 14 Angle Press the ANGLE button on the remote control to display the curr ent angle information in the top left corner of the screen. Press ANGLE again to switch to the next available camera angle on the disc. Repeat to access additi onal camera angles, if available.
DV2007 15 Set Up Menu (AS/PS/SET UP) Press and hold the AS/PS/SET UP button (1 1) on the control panel (or the DVD OSD button on the remote control) to bring up the Syste m Setup menu.
DV2007 16 • If the connected receiver or amplifier is in capable of processing di gital input with the sampling frequency of 96KHz, it will select 48 KHz as the sampling frequency to compress the signal to a standard signal.
DV2007 17 SPECIFICATIONS DVD/CD Signal to Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 90dB Dynamic Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DV2007 18 ASA Electronics Corporation www .asaelectr onics.com © 2006 ASA Electronics Corporation v .071806.
An important point after buying a device ASA Electronics DV2007 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ASA Electronics DV2007 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ASA Electronics DV2007 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ASA Electronics DV2007 you will learn all the available features of the product, as well as information on its operation. The information that you get ASA Electronics DV2007 will certainly help you make a decision on the purchase.
If you already are a holder of ASA Electronics DV2007, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ASA Electronics DV2007.
However, one of the most important roles played by the user manual is to help in solving problems with ASA Electronics DV2007. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ASA Electronics DV2007 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
