Instruction/ maintenance manual of the product NSB1107STTUW Mitsubishi Electronics
Go to page of 24
MODEL NSB1 107STTUW USER’S GUIDE For future reference, record the serial number of your display monitor in the space below: SERIAL No. The serial number is located on the rear cover of the monitor . AUTO-SCANNING WITH DIGIT AL CONTROL COLOR DISPLA Y MONITOR Internet Home Page: http://www .
- 2 -.
- 3 - ENGLISH CAUTION The power cord provided with this monitor is de- signed for safety and must be used with a properly grounded outlet to avoid possible electrical shock. Do not remove the monitor cabinet as this can expose you to very high voltages and other hazards.
- 4 - 高調波ガイドライン適合品 RADIO INTERFERENCE REGULATIONS STATE- MENT FOR U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- 5 - ENGLISH Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
- 6 - 1 1 INTRODUCTION Congratulations on your purchase of the high resolution color monitor. We designed this monitor to provide you with years of reliable trouble-free operation. This guide tells you how to connect, adjust and care for your monitor.
- 7 - ENGLISH PRESET Polarity TIMING Fh(kHz) Fv (Hz) H V 640 x 480 N.I. 31.5 60.0 – – 800 x 600 N.I. 53.7 85.1 + + 1024 x 768 N.I. 60.0 75.0 + + 1024 x 768 N.I. 68.7 85.0 + + 1152 x 870 N.I. 68.7 75.1 – – 1280 x 1024 N.I. 80.0 75.0 + + 1280 x 1024 N.
- 8 - Connect the color monitor and computer with the necessary cords and cables. 1.9 Quick Operation Chart To summarize the steps in connecting your computer with the color monitor and setting the necessary controls and switches, refer to the chart below.
- 9 - ENGLISH 2.1 Control Names See Figures 3 and 4 for the location of the user controls, indicator and connectors. Each part is identified by number and is described individually. REAR 2 2 P ART NAME FRONT R G B HD VD D-SUB COMP. BNC A B 1 2 R G B HD VD D-SUB COMP .
- 10 - 3.2.2 Connecting to An Apple Macintosh Computer Figure 6 shows the SC-B104 cable and AD-A205 Adapter(option) to the video port in an Apple Macintosh. For Macintosh Adapter AD-A205, contact your dealer. 1. Power off, both the monitor and the computer.
- 11 - ENGLISH R G B HD VD D-SUB COMP. BNC A B 1 2 R G B HD VD D-SUB COMP . BNC A B 1 2 3.2.4 BNC Connection (1) COMPOSITE SYNC ON GREEN VIDEO SIGNAL (3 wires): Connect the R, G and B video signals to the BNC connectors on the back of the monitor.
- 12 - NOTE NOTE Figure 10 (a ) Disconnect and connect the USB cable to the up- stream port of the display monitor. (b) Cycle power of the display monitor off then on. If the mark appears with “Generic USB HUB”, then enumeration was unsuccessful. Select “Generic USB HUB” marked with mark and click “Remove” and “Refresh”.
- 13 - ENGLISH (4) Click “CD-ROM Drive(C)” , and click “Next”. Figure 14 will appear. Figure 14 (2) Click “Next” on Figure 11 and Figure 12 will appear. (3) Click “Next” on Figure 12 and Figure 13 will appear. Figure 12 Figure 13 (5) Click “Finish” on Figure 14 and Figure 15 will appear.
- 14 - 4 4 OSD (On Screen Display) FUNCTIONS The monitor has an OSD(On Screen Display) function. The following procedure shows how to adjust the screen using the OSD function. (1) Turn on the monitor. (2) Press button to display the OSD screen. (3) Select the group icon on Main Menu by pressing .
- 15 - ENGLISH CONTRAST Adjusts the contrast level. X X X BRIGHT Adjusts the black level of the screen X X X COLOR NO Select the desired color from Color 1, Color 2, and Color 3 presets. X R-GAIN Adjusts the red-color balances for the selected color .
- 16 - To restore to factory preset level. To decrease the contrast. To increase the contrast. To decrease the brightness. To increase the brightness. To decrease the color temperature of the color mode selected by "COLOR NO". To narrow the width of the image on the screen.
- 17 - ENGLISH To decrease the level of the moire-clear wave. To select "HIGH" mode. To adjust the purity condition on the top-left corner. To eliminate an excessive green or white-back ground that may occur when both Sync-On-Green and external sync signals are applied to the monitor.
- 18 - The USB functions of the com- puter connected to Upstream port ROOT-A become active. The USB functions of the com- puter connected to Upstream port ROOT-B become active.
- 19 - ENGLISH No operation of the USB devices PROBLEM ITEMS TO CHECK Before calling your Authorized Product Support, please check that the items below are properly connected or set. In case of using a non-standard signal, please check the pin assignments and the signal timing of your computer with the specification outlined in Section 6.
- 20 - PROBLEM ITEMS TO CHECK LOCATION • • • Black vertical lines are visible on the screen. Thin vertical black lines on one or both sides of the screen.
- 21 - ENGLISH Size 55cm/22"(51cm/20" Diagonal Viewable Image) Mask type Aperture grille Gun In-line Deflection angle 90 ° CRT Phosphors Red, Green, Blue EBU (medium short persistence) Aperture grille pitch 0.
- 22 - 7.3 Optional Macintosh Adapter AD-A205 settings The AD-A205 Macintosh Adapter(option) allows you to take an advantage of the built in video capabilities of your Macintosh computer with the monitor. (1) Set the dip switches of the adapter, before connect to the computer.
- 23 - ENGLISH 640 x480@60Hz 640 x480@67Hz 640 x480@72Hz 640 x480@75Hz 640 x480@85Hz 800 x600@60Hz 800 x600@72Hz 800 x600@75Hz 800 x600@85Hz 832 x624@75Hz 1024 x768@60Hz 1024 x768@70Hz 1024 x768@72Hz .
MITSUBISHI ELECTRIC CORPORA TION HEAD OFFICE: MITSUBISHI DENKI BLD, MARUNOUCHI, T OKYO 100-8310 TELEX J24532 CABLE MELCO T OKYO http://www .mitsubishi-display .
An important point after buying a device Mitsubishi Electronics NSB1107STTUW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitsubishi Electronics NSB1107STTUW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitsubishi Electronics NSB1107STTUW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitsubishi Electronics NSB1107STTUW you will learn all the available features of the product, as well as information on its operation. The information that you get Mitsubishi Electronics NSB1107STTUW will certainly help you make a decision on the purchase.
If you already are a holder of Mitsubishi Electronics NSB1107STTUW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitsubishi Electronics NSB1107STTUW.
However, one of the most important roles played by the user manual is to help in solving problems with Mitsubishi Electronics NSB1107STTUW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitsubishi Electronics NSB1107STTUW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
