Instruction/ maintenance manual of the product 73 Mitsubishi Electronics
Go to page of 20
USER’S GUIDE For future reference, record the serial number of your display monitor in the space below: SERIAL No. The serial number is located on the rear cov er of the monitor . A UT O-SCANNING WITH DIGIT AL CONTROL COLOR DISPLA Y MONITOR Internet Home Page: http://www.
- ii -.
- iii - RADIO INTERFERENCE REGULATIONS STATE- MENT FOR U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation.
- iv - Congratulations! You have just purchased a TCO’99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
- 1 - CAUTION The power cord provided with this monitor is de- signed for safety and must be used with a properly grounded outlet to avoid possible electrical shock. Do not remove the monitor cabinet as this can expose you to very high voltages and other hazards.
- 2 - 1 1 INTRODUCTION Congratulations on your purchase of this high resolution color monitor. We designed this monitor to provide you with years of reliable trouble-free operation. This guide tells you how to connect, adjust and care for your monitor.
- 3 - < = 1.3 Power Management Function The monitor has a power management function which reduces the power consumption of the monitor when not in use. The power saving mode is invoked by a VESA DPMS- compliant computer. Check your computer's manual for setting this function.
- 4 - Connect the color monitor and computer with the necessary cords and cables. 1.9 Quick Operation Chart To summarize the steps in connecting your computer with the color monitor and setting the necessary controls and switches, refer to the chart below.
- 5 - 2.1 Control Names See Figures 3 and 4 for the location of the user controls, indicator and connectors. Each part is identified by number and is described individually. REAR 2 2 P AR T NAME FRONT Figure 3 5. AC POWER CONNECTOR 6. SIGNAL INPUT CONNECTOR: DB9-15P Figure 4 2.
- 6 - 3.2.2 Connecting to An Apple Macintosh Computer Figure 6 shows the signal cable and Adapter (option) to the video port in an Apple Macintosh. The Macintosh Adapter is available that converts the 2 row D-sub video connector on legacy Macintosh computers to a 3 row D-sub(VGA) connector compatible with your Mitsubishi monitor.
- 7 - 4 4 OSD (On Screen Display) FUNCTIONS The monitor has an OSD(On Screen Display) function. The following procedure shows how to adjust the screen using the OSD function. 4.1 How to adjust the screen If you don't press a button during 10 seconds, the OSD will turn off automatically.
- 8 - 4.2 Adjustment Items Item Icon Press the Minus Button Press the Plus Button NOTE NOTE NOTE Item Brightness Contrast Red Color Control Green Color Control Blue Color Control Horizontal position V.
- 9 - Black vertical lines are visible on the screen. PROBLEM ITEMS TO CHECK Before calling your Authorized Product Support, please check that the items below are properly connected or set. In case of using a non-standard signal, please check the pin assignments and the signal timing of your computer with the specification outlined in Section 6.
- 10 - PROBLEM ITEMS TO CHECK LOCATION • • Two fine horizontal lines are visible on the screen. The 2 very faint thin lines across the screen are normal. They are caused by the aperture grille stabilization filaments(Damper Wires) which are required for all aperture grille CRTs ’ .
- 11 - Size 43cm/17" (41cm/16" Viewable Image Size) Mask type Aperture grille Gun In-line Deflection angle 90 ° CRT Phosphors Red, Green, Blue EBU (medium short persistence) Aperture grille pitch 0.25mm Face Plate Anti-glare, Anti-reflection and Anti-static film Focusing method Dynamic Beam Forming (DBF) Video 0.
- 12 - IMPORTANT Please keep this Warranty in a safe place. It is valuable. The benefits conferred by this Warranty are in addition to all other rights and remedies in respect of the product which the consumer has under the Trade Practices Act and similar State and Territory Laws.
- 13 - b) the product is damaged by the use of a consumable which is not supplied by Mitsubishi Electric Australia or its recognised retailer and which consumable is not of an equivalent standard and quality . c) the product is damaged by exhausted, leaking or used batteries or fails to function correctly as a result of the use of such batteries.
- 14 - IMPORT ANT NOTICE This recycle symbol may appear on packaging material or components of this product. This symbol is a mandatory requirement in some countries and does not necessarily indicate that the material can be recycled in Australia.
- 15 -.
15500991 Declaration of Conf ormity - United States only Product Name: 17 in. (43cm) Color Display Monitor T ype: N0701 Brand Name: MITSUBISHI This device complies with P ar t 15 of the FCC Rules.
An important point after buying a device Mitsubishi Electronics 73 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mitsubishi Electronics 73 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mitsubishi Electronics 73 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mitsubishi Electronics 73 you will learn all the available features of the product, as well as information on its operation. The information that you get Mitsubishi Electronics 73 will certainly help you make a decision on the purchase.
If you already are a holder of Mitsubishi Electronics 73, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mitsubishi Electronics 73.
However, one of the most important roles played by the user manual is to help in solving problems with Mitsubishi Electronics 73. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mitsubishi Electronics 73 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
