Instruction/ maintenance manual of the product TRS-1 Millett
Go to page of 8
TRS-1 TRS-2 Before starting make sure firearm is UNLO ADED!! INSTRUCTION and OPERA TION TRS-1 TRS-2 T T A A C C T T I I C C A A L L R R I I F F L L E E S S C C O O P P E E Installation and use of Mill.
Mounting Mounting your scope properly is important to the accuracy and durability of your firearm and scope. Proper mounting assures that the scope is aligned to the barrel and the scope is rigged to the rifle for accuracy . We recommend using the Millett Picatinny rail and Millett Angle-Loc ™ rings.
Boresighting Boresighting is aligning the scope to the bore of the rifle to assist you in getting on target when sighting in the rifle. There are several ways to boresight a rifle, 1. Looking through the scope and the bore of the rifle until they are both at the same point.
Using the features of the TRS scopes The TRS was designed to give the shooter the most useful features needed under the most demanding use and conditions. T o get the full benefit of the features it’ s best to learn their use before needing them. T r y the different TRS features before you need them under varying conditions.
T urret locks Exclusive feature of the Millett TRS scopes is the turret locks that prevent accidental movement of the windage and elevation adjustments of the scope. By tightening the ring at the base of the turrets to the right, the adjustment is locked.
Mil-Dotbar™ reticle Millett has developed the Mil-Dotbar™ reticle to assist the shooter in range- finding and hold-over at longer ranges. From the center of the Dot to the Bar is one mil, which is 3.6 inches at 100 yards. The TRS-1, and TRS-2 scopes Mil- Dotbar is set for use at 10 X.
CHART 2 TRS- 1 SPECIFICA TIONS Power: 4X to 16X Length overall Inches: 16.4” Objective lens: 50mm Mount length: 6.8” Field-of-view ft at 100 yards: Weight: 29.5oz High 8 ft. Low 29 ft. W aterproof to 3 ft for 1min. Exit pupil diameter: Fog proof: -20 to 140F High power 3.
Care of your scope Y our Millett TRS scope is designed to give many years of ser vice in the most demanding of conditions, but it does require proper care and treatment. Y our scope is waterproof, and will not be harmed by rain, snow and dampness, but the electronics for the illumination, if submerged for any length of time in water may be damaged.
An important point after buying a device Millett TRS-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Millett TRS-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Millett TRS-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Millett TRS-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Millett TRS-1 will certainly help you make a decision on the purchase.
If you already are a holder of Millett TRS-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Millett TRS-1.
However, one of the most important roles played by the user manual is to help in solving problems with Millett TRS-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Millett TRS-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
