Instruction/ maintenance manual of the product T1E1-CF-01(SE) Milan Technology
Go to page of 6
COMPLIANCE INFORMA TION UL Listed C-UL Listed (Canada) CISPR/EN55022 Class A FCC Regulations This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC rules.
T1E1-CF-01 IN THE NETW ORK NOTE: THE T1E1-CF-01 REQUIRES A CSU BETWEEN THE MEDIA CONVERTER AND THE PUBLIC TELEPHONE NETWORK. F eatures • Media converter is framing independent (as ESF vs D4) and supports all common line codes, (AMI, B8ZS, HDB3). • Distance extensions of 2 km 850 nm multimode or 8 km 1300 nm singlemode.
C ABLE SPECIFIC A TIONS Fiber Cable Bit error rate: ≤ 10-9 MULTIMODE Fiber Optic Cable Recommended: 62.5 / 125 µm multimode fiber Optional: 100 / 140 µm multimode fiber 85 / 125 µm multimode fiber 50 / 125 µm multimode fiber T1E1-CF-01 850 nM Fiber Optic Transmitter Power: min: -14.
INST ALLA TION Set Switches Use small flatblade screwdriver or similar device to set recessed switches for site installation. Refer to label on top of media converter for MDI/ MDI-X switch settings. Refer to drawings below and at right for four-position switch settings.
F A UL T ISOLA TION and CORRECTION If the media converter fails, isolate and correct the failure by determining the answers to the following questions and then taking the indicated action: 1.
INST ALLA TION (continued) Install Cable COPPER T1 100 OHM (RJ-45 CONNECTOR) OR E1 120 OHM (RJ-45 CONNECTOR) NOTE: KEEP TWISTED-PAIR RUNS AS SHORT AS POSSIBLE. • Locate or build twisted-pair cables that are compliant with specifications on page 10. • Connect male RJ-45 plug connector at one end of cable to media converter RJ-45 jack connector.
An important point after buying a device Milan Technology T1E1-CF-01(SE) (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Milan Technology T1E1-CF-01(SE) yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Milan Technology T1E1-CF-01(SE) - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Milan Technology T1E1-CF-01(SE) you will learn all the available features of the product, as well as information on its operation. The information that you get Milan Technology T1E1-CF-01(SE) will certainly help you make a decision on the purchase.
If you already are a holder of Milan Technology T1E1-CF-01(SE), but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Milan Technology T1E1-CF-01(SE).
However, one of the most important roles played by the user manual is to help in solving problems with Milan Technology T1E1-CF-01(SE). Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Milan Technology T1E1-CF-01(SE) along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
