Instruction/ maintenance manual of the product 1001Z Midland Radio
Go to page of 12
.
2 Table of Contents How to install your Midland mob ile CB .................................. 3 Installation and operating accessories furnished with your Midland CB: ....................................................................................
3 Welcome to the world of Midland electronics Congratulations on your purchase of a state-of-the-art mobile CB radio. In the years ahead, you can expect to realize time and again why Midland holds the front running position among CB users everywhere.
4 Safety and convenience are the prim ary considerations in deciding exactly where to locate your radio. Caution : Be sure that the unit is located so that it does not interfere with the driver, supplemental restraint system s (air bags) or impair access to any controls.
5 Usually, the fuse block is the most convenient connecting point. It is also possible to connect to the Accessory terminal on the fuse block or ignition switch, so that your CB automatica lly goes off when the ignition goes off. B. Tightly connect the ground (BLACK WIRE ) directly to the vehicle’s metal frame.
6 Antenna: How to select, position install and tune the right one for you. Basically, you may choose from two types of mobile CB antennas - full-length whip and loaded whip - and a variety of mounts (depending on where you locate your antenna). Midland markets a broad line of high-performance antennas.
7 Antenna installation. Follow the manufacturer’s insta llation instructions carefully. , Warning : Never operate your CB radi o without attaching an ante nna or with a broken antenn a cable.
8 Midland MODEL 1001Z CB Operating controls FRONT PANEL CONTROLS ON/OFF VOLUME: In the off position your tr ansceiver power is off. Turn this control clockwise to sw itch on the unit and adjust the volume. SQUELCH CONTROL: Adjust this control until background noise just disappears.
9 Push-To-Talk bar: Press this bar to cause t he radio to transmit. Hold the microphone about 2 inches from your mouth and speak in a normal voice..
10 BACK PANEL ANTENNA CONNECTOR: Connect a standard 50-ohm CB antenna to this connector. EXT SP: When a speaker is connected to this jack, the internal speaker is by-passed. All received signals will be heard through the external speaker. The speaker connected to the “EXT” jack should be rated at 8 ohms and 5 watts.
11 Microphone .....................................................................................1000 ohm..Electret Power Supply ....................
12 Midland Radio Corporation Hereby certifies that this unit has been designed, manufactured, FCC type accepted and certified in accordance with part 95 and Part 15, Subpart C of the current FCC rules and regulations as of the date of manufacture.
An important point after buying a device Midland Radio 1001Z (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Midland Radio 1001Z yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Midland Radio 1001Z - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Midland Radio 1001Z you will learn all the available features of the product, as well as information on its operation. The information that you get Midland Radio 1001Z will certainly help you make a decision on the purchase.
If you already are a holder of Midland Radio 1001Z, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Midland Radio 1001Z.
However, one of the most important roles played by the user manual is to help in solving problems with Midland Radio 1001Z. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Midland Radio 1001Z along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
