Instruction/ maintenance manual of the product Copywriter Flash Duplicator MicroBoards Technology
Go to page of 13
Copywriter Flash Duplicator Series User’s Manual www .micro boards .com Version 1.1.
2.
3 Table of Contents Introduction ................................................................................................................... ...... 5 What’s Included ...........................................................................
4.
5 Introduction The Copywriter Flash Duplicator allo ws you to make fast copies of USB flash card s. This series is available in 3, 7, or 11 copy configuration.
6 Hardware Description The Copywriter Flash Duplicato r consists of a reader port, 3, 7, or 11 flash drive port s and Controller module. The master card will always be inserted into the TOP LEFT port, which is outlined. The blank cards will always be inse rted into the remaining ports.
7 Main Menu Flowchart . 1. Copy 2. Compare 3. Copy & Com pare 4. Information ESC ESC ESC 1. Card Info [SLOT] T ype Total Capacity Format Capacit y Used ESC ▼ ▼ ▼ ▼ ▼ OK OK OK OK 2. System Info Model Buffer S ize Firmware Version 5. Utility OK 6.
8 Pass: 27 Working Fail: 0 12 USB(3747M) 219M Reading: 124M Wait Too Long Exit? Main Menu There are 6 different Main Menu items for the Co py writer Flash Duplicato r: Copy, Compare, Copy & Compare, Information, Utility, and Setup. For the Setup options, please refer to page 9.
9 TOTAL: 11/0 Pass: 11 Fail: 0 [01] USB 3858M FAT32 3669M Controller Buffer Firmware Version TOTAL: 11/0 Pass: 11 Fail: 0 Copy 3669M 10% 0:53 367M Synchronous Duplication If the entire source content cannot be st ored in the memory buffer, Synchronous dupli cation will be required.
10 Utility The Utility function is available for erasing inse rted cards and updating the Duplicator firmware. Measure Speed The Measure Speed function can be turned on to me asure the exact spe ed of the flash read and write.
11 Setup Menu The Setup function gives you a ccess to some of the default settings used by the Copywriter Flash Duplicator. Startup Menu The Startup Menu selection allows you to se le ct the main menu item that appears when the Copywriter Flash Duplicator starts up.
12 T roubleshooting and Frequently Asked Questions Is there any limitation for copy file format ? You can use "Only Data Area" to copy FAT16/32, NTFS, Linux (ext3) format, it will only copy the data, and therefore the copy speed will be quicker.
13 S pecifications Cont act Information For technical que stions or support issues, pl ease contact Microboards Technology tech nical support at: United St ates PH: 952-556-1639 FAX: 952-556-1628 support@microbo ards.com www.microboard s.com Europe PH: +44 (0) 845 230 7800 www.
An important point after buying a device MicroBoards Technology Copywriter Flash Duplicator (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MicroBoards Technology Copywriter Flash Duplicator yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MicroBoards Technology Copywriter Flash Duplicator - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MicroBoards Technology Copywriter Flash Duplicator you will learn all the available features of the product, as well as information on its operation. The information that you get MicroBoards Technology Copywriter Flash Duplicator will certainly help you make a decision on the purchase.
If you already are a holder of MicroBoards Technology Copywriter Flash Duplicator, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MicroBoards Technology Copywriter Flash Duplicator.
However, one of the most important roles played by the user manual is to help in solving problems with MicroBoards Technology Copywriter Flash Duplicator. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MicroBoards Technology Copywriter Flash Duplicator along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
