Instruction/ maintenance manual of the product MPS-3 Meyer Sound
Go to page of 2
Note 2: “A” weighted noise input, speaker driven by 125 W (8 ohm rating for MPS- 305, 16 ohm rating for MPS-355) mono power amplifier. MPS Series 3 MPS-305 Reinforcement Loudspeaker MPS-355 Reinfo.
™ MPS-3 Control Electronics Unit Input Type Output Type Maximum Input/Output Level 1 Unbalanced Balanced Hum and Noise 2 Driver Protection Circuitry Indicators Sense/Limit Power Controls Connectors .
An important point after buying a device Meyer Sound MPS-3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Meyer Sound MPS-3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Meyer Sound MPS-3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Meyer Sound MPS-3 you will learn all the available features of the product, as well as information on its operation. The information that you get Meyer Sound MPS-3 will certainly help you make a decision on the purchase.
If you already are a holder of Meyer Sound MPS-3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Meyer Sound MPS-3.
However, one of the most important roles played by the user manual is to help in solving problems with Meyer Sound MPS-3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Meyer Sound MPS-3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
