Instruction/ maintenance manual of the product MCD-797 Metrik Mobile Electronics
Go to page of 8
A M/FM STEREO DIGIT AL PLL TUNING RADIO SD/MMC CARD, USB SLOT AND CD/MP3 PLA YER WITH ELECTRONIC ANTI-SHOCK FUNCTION INFRA-RED REMOTE CONTROLLER MCD-797 LIMITED ONE YEAR W ARRANTY This warranty shall be in e ffect for a period of one year fro m the date of the first consumer purchase.
DEAR CUSTOMER: Thank you for your purchase of our audio-visual product. Selecting fine audio equipment such as the unit you have just purchased is only the start of your musical enjoyment. Now it is time to consider how you can maximize the fun and excitement your equipment offers.
SPECIFICATION GENERAL Supply Voltage DC 13.8V . Negative Ground Current Consumption Max.10A MAX Power Output 25Watts X 4 Number of channels 2 STEREO channels. Unit Dimensions 178[W] X 164[D] X 50[H] mm. FM SECTION Frequency range 87.5MHz -107.9MHz Effective sensitivity 3uV .
Page 12 TROUBLE SHOOTING Before using the check list please make all the connections first. If you still have questions after going through the checklist, please consult your local customer service representative. Common Symptoms There is no power . The CDs can not be loaded.
Page 1 1 Page 4 5. AUTO-STORAGE/PRESET MEMORY SCAN BUTTON 1) In radio mode, press it to perform all stations memory for 5 seconds each time, while memory digital and frequency will flash on LCD. If the button is pressed for more than 2 seconds, it will seek station on current band, then write to the preset memories.
Page 10 Page 5 9. POWER BUTTON Press any button except the EJECT and RELEASE button to turn on the unit. It also can turn on the unit to insert disc, MMC/SD card or USB bar into their compartment or socket. Press PWR button hold for more than 0.5 seconds to turn off the unit.
Page 9 Page 6 13. MODE BUTTON Press it to select RADIO, DISC, CARD(after inserting MMC/SD card), USB(after inserting USB bar) and auxiliary input playing mode. 14&15. MMC/SD COMPARTMENT and USB SOCKET and THEIR OPERATION When needing to do MMC/SD or USB playing, insert the MMC/SD card or USB bar into MMC/SD compartment or USB socket.
Page 7 Page 8 OPERATION OF R EMOTE CONTROL: NOTE: Before you use the remote control, be sure to turn on the unit by pressing the POWER button on the front panel. 1. Power On/Off. 2. Mute Button 3. Loudness Button 4. Level/MENU UP Button 5. SEL/MENU Button 6.
An important point after buying a device Metrik Mobile Electronics MCD-797 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metrik Mobile Electronics MCD-797 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metrik Mobile Electronics MCD-797 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metrik Mobile Electronics MCD-797 you will learn all the available features of the product, as well as information on its operation. The information that you get Metrik Mobile Electronics MCD-797 will certainly help you make a decision on the purchase.
If you already are a holder of Metrik Mobile Electronics MCD-797, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metrik Mobile Electronics MCD-797.
However, one of the most important roles played by the user manual is to help in solving problems with Metrik Mobile Electronics MCD-797. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metrik Mobile Electronics MCD-797 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
