Instruction/ maintenance manual of the product MD6885 Memorex
Go to page of 18
PERSONAL AM/FM STEREO/COMP ACT DISC PLA YER WITH 45 SECOND DIGIT AL ANTI-SHOCK PROTECTION MODEL: MD6885 BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE INSTRUCTIONS COMPLETELY.
1 SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
2 INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers.
4 LOCA TION OF CONTROLS – + MD6885.O/M.QXD 1/15/02 10:07 PM Page 4 1. Displa y 2. MODE Button 3. ESP/BAND Button 4. PROG. (Program) Button 5. PRESET DO WN Button 6. SKIP/SEARCH/T uning – ( ) Button 7. LINE OUT Jac k (Side of Unit) 8. PHONES Jac k (Side of Unit) 9.
5 This CD player requires either two “AA” cell batteries (not included) or the provided AC adapter. BATTERY INSTALLATION The battery indicator will appear in the CD display when the batteries need replacing. 1. Open the battery compartment door on the bottom of the unit by sliding it out and then lifting it.
6 RADIO OPERA TION Set the VOLUME control ❶ to minimum and plug the headphone into the PHONES jack. Press the PLAY/PAUSE ( ) /POWER ON button ❷ to turn the unit on. 1 TO LISTEN T O THE RADIO Slide the FUNCTION switch ❶ to the RADIO position. Press the ESP/BAND button ❷ to select a band (AM or FM).
7 RADIO OPERA TION (CONTINUED) Tune a desired station as described in the previous section. Press the PROG. button; the PROG. indicator and preset number will blink in the display.
8 CD OPERA TION Open the CD compartment lid by sliding the CD Open switch to the right. Gently press a disc, label side up, onto the spindle until it locks in place. Close the CD compartment lid. 1 TO INSERT A CD Make sure the CD has stopped and open the CD compartment lid.
9 CD OPERA TION (CONTINUED) Insert a CD as described on the previous page. Insert headphones into the PHONES jack. Slide the FUNCTION switch to the CD position. 1 While the unit is off, press the PLAY/PAUSE ( )/POWER ON button to start playback. To pause PLAYBACK , press the PLAY/PAUSE ( )/POWER ON button again, the display will blink.
10 NOTES: • This unit is capable of playing standard CDs or 3” singles; no adapter is required. • If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will show “no disc”. • As each track is played, the track number and elapsed time are shown in the display.
11 CD OPERA TION (CONTINUED) If the CD player is subject to vibration during playback, the bars will disappear one by one. During the vibration, the music should continue to play the signals stored in the memory until the CD player can read the music data properly from the disc.
12 CD OPERA TION (CONTINUED) With a CD inserted, press the PLAY/PAUSE ( )/POWER ON button ❶ to turn the unit on. Press the MODE button ❷ once; the Repeat 1 indicator will appear in the display. 1 The unit will then play the same track over and over until the STOP ( ■ )/POWER OFF button ❶ is pressed.
13 CD OPERA TION (CONTINUED) With a CD inserted, press the PLAY/PAUSE ( )/POWER ON button ❶ to turn the unit on and press the STOP ( ■ )/POWER OFF button ❷ to stop auto playback. Press the MODE button ❸ 3 times; the INTRO indicator will blink in the display.
14 CD OPERA TION (CONTINUED) With a CD inserted, press the PLAY/PAUSE ( )/POWER ON button ❶ to turn the unit on and press the STOP ( ■ )/POWER OFF button ❷ to stop auto playback. Press the PROG. button ❸ ; the PROG indicator will appear in the CD display.
15 CARE AND MAINTENANCE Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fi ngers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc.
16 TROUBLESHOOTING GUIDE If you experience a problem with this unit, check the chart below before calling for service. SYMPTOM CAUSE SOLUTION Unit will not Weak or dead batteries Replace batteries and insert turn on. or inserted incorrectly. correctly.
Memcorp, Inc. Weston, Fl Printed in Hong Kong Visit our website at www .memcorpinc.com MD6885.O/M.QXD 1/15/02 10:07 PM Page 17.
An important point after buying a device Memorex MD6885 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Memorex MD6885 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Memorex MD6885 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Memorex MD6885 you will learn all the available features of the product, as well as information on its operation. The information that you get Memorex MD6885 will certainly help you make a decision on the purchase.
If you already are a holder of Memorex MD6885, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Memorex MD6885.
However, one of the most important roles played by the user manual is to help in solving problems with Memorex MD6885. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Memorex MD6885 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
