Instruction/ maintenance manual of the product MXN102 Maxus
Go to page of 4
Operating Instructions MXN102 8 tion equipment such as head, hear- ing and foot protection equipment. Serious eye or permanent hearing loss could result. • Assuring that the tool is kept in safe working order as described in this manual. • Assuring the proper maintenance of all tools in employer’s possession.
MXN102 7 Operating Instructions Air leaking at trigger valve Air leaking between hous- ing and nose Air leaking between hous- ing and cap Nailer skips driving nail Nailer runs slow or has loss of powe.
6 MXN102 Operating Instructions Interchange Information Can use 5/8” to 2” 18 gauge brad nails designed for the following tools: Bostitch ® BT125SK-2 & BT200K-2, Campbell Hausfeld ® NB0030 & NB0040, DeWalt ® D51238K, Paslode ® T125-F18 & T200-F18, Porter Cable ® BN125 & BN200, and Senco Finish Pro ® 15 & 18.
6 Rotate door back into the closed position. 7. Push button down again to lift the hook. Close the door and release the button to reengage the hook with the nose. 8. Make sure the trig- ger and work contact element (WCE) move freely up and down without sticking or binding.
An important point after buying a device Maxus MXN102 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maxus MXN102 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maxus MXN102 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maxus MXN102 you will learn all the available features of the product, as well as information on its operation. The information that you get Maxus MXN102 will certainly help you make a decision on the purchase.
If you already are a holder of Maxus MXN102, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maxus MXN102.
However, one of the most important roles played by the user manual is to help in solving problems with Maxus MXN102. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maxus MXN102 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
