Instruction/ maintenance manual of the product MAX6877 Maxim
Go to page of 3
Maxim > App Notes > MICROPROCESSOR SUPERVISOR CIRCUITS Keywords: sequencing, sequencer, monitor, reset, voltage tracking, voltage tracker Sep 20, 2006 APPLICATION NOTE 3918 User's Guide for.
To create a basic design with the MAX6877, such as the one in Figure 1, follow these steps: 1. Select the input voltage thresholds for IN1, IN2, and IN3. The input voltages must exceed these thresholds for power-up to begin. Use the following formula to set the resistor-divider values for IN1.
AN3918, AN 3918, APP3918, Appnote3918, Appnote 3918 Copyright © by Maxim Integrated Products Additional legal notices: www.maxim-ic.com/legal.
An important point after buying a device Maxim MAX6877 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maxim MAX6877 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maxim MAX6877 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maxim MAX6877 you will learn all the available features of the product, as well as information on its operation. The information that you get Maxim MAX6877 will certainly help you make a decision on the purchase.
If you already are a holder of Maxim MAX6877, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maxim MAX6877.
However, one of the most important roles played by the user manual is to help in solving problems with Maxim MAX6877. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maxim MAX6877 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center