Instruction/ maintenance manual of the product MHN100FR Matrix Appliances
Go to page of 16
1 Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshir e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu IMPOR T ANT : PLEASE REFER TO P AGE 1 3 FOR INFORMA TION ON CONFIGURING THE PO WER CONSUMPTION M ODE CORRECTL Y .
2 Important The CDA Gr oup Ltd cannot be held responsible for injuries or losses caused by incorr ect use or installation of this product. Please note that CD A reserve the right t o invalidate the guar antee supplied with this product f ollowing incorr ect installation or misuse of the appliance or use in a commer cial envir onment.
3 • Always use appr opriate cookware. • Do not cook unopened tins of food dir ectly on the hob. • Never put cooking f oil or plastic materials on the ceramic surfac e when the hob is hot. These materials could melt and cause damage to the hob. • This hob (Class 3) has been designed for use only as a cooking applianc e.
4 Using your Hob The table below offer s guidance as to what eac h power level is f or . P ow er level T ype o f cooking 0 Switched off 1/2 For melting (butt er/chocolate) or k eeping food warm 2/3 K eeping food hot or to heat small quantities of liquid 3/4 Heat larger quantities of liquid (sauc es etc.
5 Using your Hob T o swit ch the hob on T o s witch the pow er on, touch and hold the for appr oximately tw o seconds. The hob will beep and all four zone displa ys will show zer o. Please not e: If a pow er level is no t set within ten seconds, the hob will swit ch off automatically .
6 Childlock The hob is equipped with a childloc k to lock the contr ols. This can be used when the hob is off or during cooking. T o swit ch on the childloc k T ouc h the key for appr oximately two sec onds until the LED above the childloc k key illuminates and the hob beeps to confirm the childloc k is switched on.
7 Efficient Use of your Hob The hob is equipped with zones of differ ent sizes, designed to accommodate most shapes and sizes of pan. F or best results, only use pans with flat bottoms and c hoose an appropriate z one depending on the size of the pan.
8 Car e and Maintenanc e Always disc onnect the appliance from the pow er supply befor e undertaking any cleaning or maintenanc e. Important: • Steam cleaner s must not be used when cleaning this appliance. • Y ou should use a non-abrasiv e cleaner to clean the hob top.
9 Y ou observe that P ossible Causes What should you do? The display shows a series of digits and symbols on first c onnection W orking normally Nothing, the hob will be ready to use within appro xim.
10 Fitting the Hob Unpacking the hob: T ak e care not to lose or mishandle an y parts. Fitting position of the hob: This appliance must be installed a minimum of 50mm fr om any back w all and a minimum of 1 80mm away fr om any adjacent vertical surfaces, e.
11 How t o install the hob: Over all dimensions of the hob: Width: 580 mm Depth: 5 1 0 mm W orktop cut-out dimensions: Width: 560 mm Depth: 490 mm 1 . Make the r equired hole in the w orktop. Befor e doing this, you must chec k the instructions supplied with any cooker hood to ensur e that you will have the r equired clearance.
12 P ow er configur ation This hob can be connected to a 1 3, 1 6, 25 or 32amp supply and configured t o work on any of these pow er settings. If the hob is connected to a 32amp supply all f our zones can be used on the maximum setting with boost at the same time.
13 Mains Electricity Connection W arning! this appliance must be earthed W e recommend that the appliance is c onnected by a qualified electrician, who is a member of the N.
14.
15.
16 Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshir e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshir e • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.
An important point after buying a device Matrix Appliances MHN100FR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Matrix Appliances MHN100FR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Matrix Appliances MHN100FR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Matrix Appliances MHN100FR you will learn all the available features of the product, as well as information on its operation. The information that you get Matrix Appliances MHN100FR will certainly help you make a decision on the purchase.
If you already are a holder of Matrix Appliances MHN100FR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Matrix Appliances MHN100FR.
However, one of the most important roles played by the user manual is to help in solving problems with Matrix Appliances MHN100FR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Matrix Appliances MHN100FR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
