EN
Official user manual

Master Chef 405

11 pages·2.1 MB·Gas Grill·PDF·ENDEFRITNLJA
Master Chef 405
Table of Contents 80 sections WARRANTY · IF YOU NEED HELP OR PARTS, CALL THE MASTER CHEF HOTLINE · 1-877-707-5463 · HOURS: 8AM-7PM EST Mon-Fri, Close Saturday and Sunday · … ShowHide
WARRANTYp.1IF YOU NEED HELP OR PARTS, CALL THE MASTER CHEF HOTLINEp.11-877-707-5463p.1HOURS: 8AM-7PM EST Mon-Fri, Close Saturday and Sundayp.1TIP: ASSEMBLE YOUR GRILL IMMEDIATELY. MISSING OR DAMAGED PARTS MUST BEp.1GRILL SAFETY CHECKp.1For your family’s safety, please check the following:p.1SAFETY & CARE MANUALp.1THIS MANUAL MUST REMAIN WITH THE PRODUCT AT ALL TIMESp.1To ORDER non-warranty replacement parts or accessories, or to register your warranty,p.1WARNINGp.1INSTALLATIONp.2ADDITIONAL WARNINGSp.2Minimum clearance to adjacent combustible materials:p.2To ensure your satisfaction and for follow-up service,p.2TABLE OF CONTENTSp.2Installation and Warnings 1p.2L.P. Gas Cylinderp.2Requirements 1p.2Hook-ups and Warnings 2p.2Transportation and Storage 3p.2Safety Hose and Regulator 4p.2Leak Testing 5p.2Natural Gas Hook-ups and Warnings 6p.2Operation - Lighting Instructions 6p.2Cooking and Performance 9p.2Troubleshooting 11p.2Cleaning and Maintenance 14p.2Warranty and Service 17p.2L.P. GAS CYLINDER REQUIREMENTSp.2GAS HOOK-UP’S AND WARNINGSp.3(LP) LIQUID PETROLEUM GASp.3LP GAS WARNINGS:p.3LP cylinder requirements:p.3L.P. CYLINDER REMOVAL, TRANSPORT AND STORAGEp.3LP cylinder valve must have:p.3Before disconnecting the LP cylinder:p.3L.P. CYLINDER FILLINGp.3DANGERp.3LEAK TESTING THE VALVE, HOSE AND REGULATOR ASSEMBLYp.4LP Cylinder Leak Test For Your Safetyp.4DO NOT USE HOUSEHOLD CLEANING AGENTS:p.4SAFETY HOSE AND REGULATORp.4FOR NATURAL GAS MODELS (if applicable)p.4To Connectp.4Hose and Regulator comes equipped with the following:p.4To Disconnectp.4Testing For Gas Leaksp.4Before attempting to operate this Grill:p.4Connecting Regulator to the LP Cylinderp.4NATURAL GAS HOOK-UPS AND WARNINGSp.5NEW Natural Gas Barbecuep.5Match-Lighting Main Burnersp.5Lighting the SIDE BURNER (if applicable)p.5OPERATION — LIGHTING INSTRUCTIONSp.5Lighting the Main Burners:p.5Match lighting the SIDE BURNER (if applicable)p.5Lighting the ROTISSERIE BURNER (if applicable)p.5COOKING AND PERFORMANCEp.6! ! ! • CAUTION!p.6Turning Grill Offp.6Grilling Tipsp.6General Side Burner Tipsp.6General Infrared Rotisserie Burner Tipsp.6FLASH FIRESp.7Characteristics of a Flash Firep.7Prevent Flash Fires by:p.7Regulator Flow Limiting Devicep.7GREASE FIRESp.7Characteristics of a Grease Firep.7Prevent Grease Fires by:p.7Resetting the Regulator Flow Limiting featurep.7FOR YOUR SAFETYp.7CONTROLp.7VALVEp.7TROUBLESHOOTINGp.7PANELp.7SPIDER WEBS INSIDE VENTURIp.7Resolving IGNITER Performance Issuesp.7BURNERp.7
Page 1 of the Master Chef 405 user manual — WARNING
Page 1 · click to enlarge
Page 1
Master Chef 405 — WARRANTY diagram (page 1)
Fig. 1
Master Chef 405 — WARRANTY diagram (page 1)
Fig. 2

WARRANTY

STOP Do not return the product to the store.

IF YOU NEED HELP OR PARTS, CALL THE MASTER CHEF HOTLINE

1-877-707-5463

HOURS: 8AM-7PM EST Mon-Fri, Close Saturday and Sunday

  • GET HELP FOR: MISSING/DAMAGED PARTS
  • ASSEMBLY
  • TROUBLESHOOTING
  • WARRANTY ASSISTANCE
  • PRODUCT INFORMATION

TIP: ASSEMBLE YOUR GRILL IMMEDIATELY. MISSING OR DAMAGED PARTS MUST BE

CLAIMED WITHIN 30 DAYS, OF PURCHASE.

GRILL SAFETY CHECK

For your family’s safety, please check the following:

Master Chef 405 — GRILL SAFETY CHECK diagram (page 1)
Fig. 3

SAFETY & CARE MANUAL

READ and UNDERSTAND the owner’s manual

PERFORM LEAK TEST on all connections as specified in this user manual. Leak Checks should be performed on all new BBQ’s even if assembled by an assembler or gas technician. Leak checks should be performed frequently thereafter.

THIS MANUAL MUST REMAIN WITH THE PRODUCT AT ALL TIMES

To ORDER non-warranty replacement parts or accessories, or to register your warranty,

INSPECT and CLEAN burner tubes to avoid flash fires caused by spider webs and other blockages. Inspect gas jets to ensure they are correctly installed in burner tubes. Never leave a lit grill unattended.

please visit us on the web at www.masterchefbbqs.com

BEFORE OPENING THE GAS SUPPLY, ensure the lid is open, control knobs are in OFF position, gas is turned off, and the regulator is attached to tank correctly. Then follow the PROPER LIGHTING PROCEDURE as shown in the manual. If above steps are not followed, you may experience low flames, or other performance issues.

CHECK that the regulator nipple is centered into the LP tank valve. Do NOT cross thread this connection. Cross threading may result in a fire, or explosion at the tank connection.

AVOID dangerous grease fires by performing regular cleaning and maintenance of interior casting, the grease collection system, flame tamers and cooking grates.

INSTALLER OR ASSEMBLER/CONSUMER This manual should be kept with the BBQ at all times.

2. Do not store or use gasoline or other flammable liquids or vapours in the vicinity of this or any other appliance.

WARNING

Failure to follow all of the Manufacturer’s instructions could result in hazardous fires, explosions, property damage, or serious personal injury or even death.

3. An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance.

Follow all leak check procedures carefully prior to operation of barbecue, even if grill was dealer assembled. Do not try to light this barbecue without reading the Lighting Instructions section of this manual.

T H I S B A R B E C U E I S F O R O U T D O O R U S E O N LY

Manual Revision #13102009 PD
Page 2 of the Master Chef 405 user manual — Table of Contents
Page 2 · Contents
Contents

Contents

WARRANTYp.1IF YOU NEED HELP OR PARTS, CALL THE MASTER CHEF HOTLINEp.11-877-707-5463p.1HOURS: 8AM-7PM EST Mon-Fri, Close Saturday and Sundayp.1TIP: ASSEMBLE YOUR GRILL IMMEDIATELY. MISSING OR DAMAGED PARTS MUST BEp.1GRILL SAFETY CHECKp.1For your family’s safety, please check the following:p.1SAFETY & CARE MANUALp.1THIS MANUAL MUST REMAIN WITH THE PRODUCT AT ALL TIMESp.1To ORDER non-warranty replacement parts or accessories, or to register your warranty,p.1WARNINGp.1INSTALLATIONp.2ADDITIONAL WARNINGSp.2Minimum clearance to adjacent combustible materials:p.2To ensure your satisfaction and for follow-up service,p.2TABLE OF CONTENTSp.2Installation and Warnings 1p.2L.P. Gas Cylinderp.2Requirements 1p.2Hook-ups and Warnings 2p.2Transportation and Storage 3p.2Safety Hose and Regulator 4p.2Leak Testing 5p.2Natural Gas Hook-ups and Warnings 6p.2Operation - Lighting Instructions 6p.2Cooking and Performance 9p.2Troubleshooting 11p.2Cleaning and Maintenance 14p.2Warranty and Service 17p.2L.P. GAS CYLINDER REQUIREMENTSp.2GAS HOOK-UP’S AND WARNINGSp.3(LP) LIQUID PETROLEUM GASp.3LP GAS WARNINGS:p.3LP cylinder requirements:p.3L.P. CYLINDER REMOVAL, TRANSPORT AND STORAGEp.3LP cylinder valve must have:p.3Before disconnecting the LP cylinder:p.3L.P. CYLINDER FILLINGp.3DANGERp.3LEAK TESTING THE VALVE, HOSE AND REGULATOR ASSEMBLYp.4LP Cylinder Leak Test For Your Safetyp.4DO NOT USE HOUSEHOLD CLEANING AGENTS:p.4SAFETY HOSE AND REGULATORp.4FOR NATURAL GAS MODELS (if applicable)p.4To Connectp.4Hose and Regulator comes equipped with the following:p.4To Disconnectp.4Testing For Gas Leaksp.4Before attempting to operate this Grill:p.4Connecting Regulator to the LP Cylinderp.4NATURAL GAS HOOK-UPS AND WARNINGSp.5NEW Natural Gas Barbecuep.5Match-Lighting Main Burnersp.5Lighting the SIDE BURNER (if applicable)p.5OPERATION — LIGHTING INSTRUCTIONSp.5Lighting the Main Burners:p.5Match lighting the SIDE BURNER (if applicable)p.5Lighting the ROTISSERIE BURNER (if applicable)p.5COOKING AND PERFORMANCEp.6! ! ! • CAUTION!p.6Turning Grill Offp.6Grilling Tipsp.6General Side Burner Tipsp.6General Infrared Rotisserie Burner Tipsp.6FLASH FIRESp.7Characteristics of a Flash Firep.7Prevent Flash Fires by:p.7Regulator Flow Limiting Devicep.7GREASE FIRESp.7Characteristics of a Grease Firep.7Prevent Grease Fires by:p.7Resetting the Regulator Flow Limiting featurep.7FOR YOUR SAFETYp.7CONTROLp.7VALVEp.7TROUBLESHOOTINGp.7PANELp.7SPIDER WEBS INSIDE VENTURIp.7Resolving IGNITER Performance Issuesp.7BURNERp.7
Page 3 of the Master Chef 405 user manual — DANGER
Page 3 · click to enlarge
Page 3

GAS HOOK-UP’S AND WARNINGS

(LP) LIQUID PETROLEUM GAS

LP GAS WARNINGS:

  • LP gas is nontoxic, odorless and colorless when produced. For Your Safety , LP gas has been given an odor (similar to rotten cabbage) so that it can be smelled.
  • Always turn cylinder valve off when the barbecue is not in use.
  • Always handle the tank valve with the utmost care.
  • Never connect an unregulated LP gas cylinder to the barbecue
  • LP gas is highly flammable and may ignite unexpectedly when mixed with air.
  • Always keep the cylinder, in use, securely fastened in an upright position

LP cylinder requirements:

  • Never expose the cylinder to direct sunlight or excessive heat.
  • Never insert any kind of object into the valve outlet as this may cause damage to the Backcheck. A damaged Backcheck can leak resulting in fires, explosions, property damage, sever injuries or death.
  • Use LP cylinder only with these required measurements:
  • 12”(30.5cm) (diameter) x 18” (45.7 cm) (tall) with 20 lb. (9 kg) capacity maximum.
  • Do not store an LP cylinder in enclosed spaces such as a carport, garage, porch, covered patio or other building. Make sure the storage area has a lot of ventilation.
  • LP cylinders must be constructed and marked in accordance with specifications for LP cylinders of the U.S. Department of Transportation (DOT) or the National Standard of Canada, CAN /CSA-B339, Cylinders spheres and tubes for transportation of dangerous goods. See LP cylinder collar for marking.
  • Do not store an LP cylinder in an area where children play.
Master Chef 405 — LP cylinder requirements: diagram (page 3)
Fig. 4 · LP cylinder requirements:

L.P. CYLINDER REMOVAL, TRANSPORT AND STORAGE

LP cylinder valve must have:

  • Shut-off valve with a correct cylinder valve output as specified in current standards. CAN / CGA 1.6g-M97 Outdoor Gas Grills. USA: ANSI Z21.58a-2006/CSA 1.6g-2006 Outdoor Cooking Appliances.

Before disconnecting the LP cylinder:

1. Turn OFF all control knobs and the LP cylinder valve.
2. Turn coupling nut counterclockwise by hand only - do not use tools to disconnect. Remove LP Cylinder from inside cart.
  • Type 1 outlet compatible with regulator or grill. The type 1 valve is easily recognized by the large external thread on the outside of the valve.
3. Install safety cap onto LP cylinder valve. Always use cap supplied with tank valve.

Type 1 outlet with thread on outside

  • Failure to use safety cap as directed may result in serious personal injury and/or property damage.
  • Safety relief valve with direct connection to the vapour space of the cylinder.
  • UL listed Overfill Protection Device (OPD) . This OPD safety feature is identi fied by a unique triangular hand wheel. Use only LP cylinders equipped with this type of valve.
  • A device for vapor withdrawal.
  • A collar to protect the LP tank shut off valve.
Master Chef 405 — Before disconnecting the LP cylinder: diagram (page 3)
Fig. 5 · Before disconnecting the LP cylinder:

L.P. CYLINDER FILLING

  • A ring on the bottom of the LP tank to secure it to the support assembly.
  • Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.
  • Use only licensed and experienced dealers.
  • Ensure that the dealer checks and tests the tank for leaks after filling
  • LP dealer must purge new cylinder before filling.
  • Dealer should NEVER fill LP cylinder more than 80% of LP cylinder volume. Volume of propane in cylinder will vary by temperature.
  • Do not release liquid propane (LP) gas into the atmosphere. This is a hazardous practice.
  • To remove gas from LP cylinder, contact an LP dealer or call a local fire department for assistance.

DO NOT connect to a propane cylinder exceeding 9.1 kg capacity or use a cylinder with any other type of cylinder valve connection device.

Before opening LP cylinder valve, check the coupling nut for tightness.

DANGER

Master Chef 405 — DANGER diagram (page 3)
Fig. 6
  • NEVER store a spare LP cylinder, empty or full, under or near the appliance.
  • Never fill a cylinder beyond 80% full.
  • An over filled or improperly stored cylinder is a hazard due to possible gas release from the safety relief valve. This could cause an intense fire or explosion with risk of property damage, serious injury or death.
  • Do not store objects or materials inside the barbecue cart enclosure that would block the flow of combustion air to the underside of either the control panel or the burner box.
  • If you see, smell or hear gas escaping, immediately get away from the LP cylinder/appliance and call your fire department.

OPD Hand Wheel · Safety Relief Valve · Strap and Cap

Page 4 of the Master Chef 405 user manual — Connecting Regulator to the LP Cylinder
Page 4 · click to enlarge
Page 4

LEAK TESTING THE VALVE, HOSE AND REGULATOR ASSEMBLY

LP Cylinder Leak Test For Your Safety

1. Turn all grill control knobs to OFF.
2. Ensure that the regulator is tightly connected to LP cylinder.
3. Completely open LP cylinder valve by turning hand wheel counterclockwise. If you hear a rushing sound , turn gas off immediately. There is a leak at the connection. Correct before proceeding.
  • Do not smoke during leak test.
  • Do not use an open flame to check for gas leaks
Master Chef 405 — LP Cylinder Leak Test For Your Safety diagram (page 4)
Fig. 7 · LP Cylinder Leak Test For Your Safety
4. Brush soapy solution onto hose and regulator and all connections from the LP tank to the main and side burner manifold.
  • BBQ must be leak tested outdoors in a well ventilated area, away from ignition sources such as gas fired electrical appliances. During leak test, keep your BBQ away from open flames or sparks.
5. If “growing” bubbles appear, there is a leak. Close LP cylinder valve immediately and re-tighten connections. If leaks cannot be stopped do not try to repair. Call for replacement parts. Order new parts by providing the serial number, model number, name and part number of items required (see parts list) to a Customer Care Agent 1-877-707-5463 .

º Use a clean paint brush and a 50/50 mild soap and water mixture.

6. Always close LP cylinder valve after performing leak test by turning hand wheel clockwise.

º Brush soapy solution onto areas indicated by arrows in figure A.

DO NOT USE HOUSEHOLD CLEANING AGENTS:

Damage to gas train components can result.

Master Chef 405 — DO NOT USE HOUSEHOLD CLEANING AGENTS: diagram (page 4)
Fig. 8

SAFETY HOSE AND REGULATOR

FOR NATURAL GAS MODELS (if applicable)

Propane Models: Your Barbecue is designed to operate on L.P gas at a pressure of 2.74Kpa (11” water column). A regulator preset to this pressure is supplied with your Barbecue.

All Master Chef Natural Gas Barbecues come equipped with a 10’ or 12’ Natural Gas hose with a quick connect socket connection. This will allow you to attach your Barbecue to your residential gas line.

To Connect

Hose and Regulator comes equipped with the following:

1. Push back the sleeve on the Quick Connect socket and insert plug and release the sleeve as shown.

Type 1 quick closing connection system which incorporates the following safety features:

2. Push the two pieces together until the sleeve snaps forward, to lock the plug in the socket.

To Disconnect

Nipple has to be centered into the LP cylinder valve.

  • Will limit the gas flow until a POSITIVE CONNECTION has been made
1. Push sleeve back and pull the plug out.
  • Has a THERMAL COMPONENT that will automatically shut off the flow of gas if a temperature of 115-150°C (240-300°F) is reached.

Testing For Gas Leaks

  • Has a Flow Limiting Feature, which will restrict the flow of gas to 10 cubic ft/ hour in the event of a leak, improper lighting procedure, or regulator malfunction.

Before attempting to operate this Grill:

  • Always confirm that all burner control knobs are in the OFF position.

Connecting Regulator to the LP Cylinder

  • Always connect the gas supply hose first, open lid and then open the gas shutoff valve.
1. LP cylinder must be properly secured onto grill.

º Always use a brush or spray bottle to apply a 50/50 solution of liquid soap and water to all connection points, to test for

2. Turn all control knobs to the OFF position.

gas leaks. Never use a match or open flame for that purpose.

3. Turn LP cylinder OFF by turning hand-wheel clockwise to a full stop.

º Always look for bubbles to appear, as the appearance of bubbles will indicate a gas leak.

4. Remove the protective cap from LP cylinder valve. Always use cap and strap supplied with valve.

º Always turn off the gas immediately and tighten the connection, if you find that a leak has been detected.

º Before lighting the grill, always repeat this procedure until no further gas leaks are found.

5. Hold regulator and insert nipple into LP cylinder valve. Hand tighten the coupling nut. Hold the regulator in a straight line with LP cylinder valve so as not to cross-thread the connection.

º If a leak cannot be stopped, do not attempt to light the grill. Always contact a certified Natural Gas technician for assistance or

the Master Chef Customer Care Hotline for assistance. 1-888-707-5463.

6. Turn the coupling nut clockwise and tighten to a full stop. The regulator will seal on the back-check feature in the LP cylinder valve, resulting in some resistance.

Hold coupling nut and regulator as shown for proper connection to LP cylinder valve.

Figure A

Page 5 of the Master Chef 405 user manual — Lighting the ROTISSERIE BURNER (if applicable)
Page 5 · click to enlarge
Page 5

NATURAL GAS HOOK-UPS AND WARNINGS

NEW Natural Gas Barbecue

Match-Lighting Main Burners

If you are experiencing poor natural gas barbecue performance, including but not limited to low flame, low heat or poor heat distribution, please review the following information:

1. Open lid. Turn off all control knobs. Ensure LP cylinder is closed.
Master Chef 405 — NEW Natural Gas Barbecue diagram (page 5)
Fig. 9 · NEW Natural Gas Barbecue
2. Turn on the gas supply valve at the tank (1 to 2 turns) or turn on the main gas supply valve.
  • Always consult the Rating Label on the back of the barbecue to confirm that it has already been configured to burn natural gas.
  • If experiencing performance issues with a brand new barbecue hooked up to an older natural gas home connection, it is possible that the natural gas supply line is not able to supply up to the essential 85,000 BTU’s required (depending on the model). Please contact Master Chef Customer Care for requirements and then consult with your certified natural gas technician.
3. Insert a lit match or a butane lighter into the match lighting hole located on the left hand side or right hand side of the barbecue cart (on the under side of the burner side shelf).
  • All gas supply plumbing must be carried out by a qualified service agency. The Supply connection shall be carried out in accordance with provincial authorities having jurisdiction, and in accordance with CAN/CGA 1-B149.1 & 2 installation code requirements.
4. Turn the selected burner control knob, either the far right or far left, to the HIGH position. Be sure the burner lights and stays lit.
5. Light adjacent burners in sequence by pushing knobs in and turning to “HI”.

Model may not be exactly as shown.

  • A shut off valve must be installed between the barbecue and the main supply. For natural gas, use a 3/8” or 1/2” natural gas supply line capable of an input of up to 85,000 BTU’s (depending on the model).

Lighting the SIDE BURNER (if applicable)

  • When conducting pressure test always isolate the barbecue from the gas supply piping system by disconnecting the barbecue and closing its individual manual shutoff valve. The gas supply piping system should be tested at pressures which exceed 1/2 psi (3.5kPa).
1. Open side burner lid. Confirm that all burner control knobs are in the OFF position before opening the gas supply.
2. Turn on the gas supply valve at the tank (1 to 2 turns) or turn on the main gas supply valve.
3. Turn the burner control knob to the “HI” position.
  • All gas supply plumbing must be able to supply 7” water column to the barbecue WITH ALL BURNERS IN OPERATION .
4. Immediately activate the Igniter. The selected burner should light within five seconds.
5. If ignition does NOT occur in 5 seconds, turn the burner control OFF, wait 5 minutes for the gas to clear and repeat the lighting procedure.
6. If the burner will not light when using the ignitor, follow the match lighting instructions.
Master Chef 405 — Lighting the SIDE BURNER (if applicable) diagram (page 5)
Fig. 10 · Lighting the SIDE BURNER (if applicable)

OPERATION — LIGHTING INSTRUCTIONS

Lighting the Main Burners:

Match lighting the SIDE BURNER (if applicable)

1. Read instructions before lighting.
Master Chef 405 — Lighting the Main Burners: diagram (page 5)
Fig. 11 · Lighting the Main Burners:
1. Open lid. Turn OFF all control knobs. Ensure LP cylinder is closed.
2. Open lid before lighting.
2. Turn on the gas supply valve at the tank (1 to 2 turns) or turn on the main gas supply valve.
3. Turn off all burners and close tank valve.
4. Open tank valve. Wait 5 seconds.
3. Insert a lit match or a butane lighter under the side burner grate.
5. Turn desired burner knob to “HI”.
4. Turn the side burner control knob to the “HI” position. Be sure the burner lights and stays lit.
6. Press igniter. Repeat if necessary.

Model may not be exactly as shown.

7. If ignition does not immediately take place, turn burner knobs “OFF”. Wait 5 minutes before lighting with a match.

Lighting the ROTISSERIE BURNER (if applicable)

1. Open BBQ lid. Ensure all control knobs in the OFF position before opening the gas supply.
Master Chef 405 — Lighting the ROTISSERIE BURNER (if applicable) diagram (page 5)
Fig. 12 · Lighting the ROTISSERIE BURNER (if applicable)
2. Turn on the gas supply valve at the tank (1 to 2 turns) or turn on the main gas supply valve.
3. Turn the Rotisserie burner knob to the “HI” position.
4. Press and hold ELECTRONIC IGNITER button.
5. If the Rotisserie burner does NOT light, turn knob to OFF, wait 5 minutes, and then repeat lighting procedure.

Model may not be exactly as shown.

6. If the Rotisserie burner still does not light follow the match lighting procedure for the Rotisserie burner.
Page 6 of the Master Chef 405 user manual — General Infrared Rotisserie Burner Tips
Page 6 · click to enlarge
Page 6
Master Chef 405 — COOKING AND PERFORMANCE diagram (page 6)
Fig. 13

COOKING AND PERFORMANCE

! ! ! • CAUTION!

  • AVOID BURNS!

Turning Grill Off

  • DO NOT TOUCH WHEN BBQ IS IN USE!
1. Turn all knobs to OFF position.
  • EXTREMELY HOT SURFACE!
2. Turn LP cylinder off by turning hand-wheel clockwise to a full stop or turn off natural gas supply valve.

* SHADED AREAS BECOME EXTREMELY HOT WHEN IN USE.

WARNING

If the heat output is too low, the flow control feature may have been activated by a gas leak or improper lighting procedure. If so, turn off the burner valve and cylinder valve, and perform a “Leak Test”. If there aren’t any leaks, perform a complete regulator flow limiting device reset.

Grilling Tips

  • Create an improved, non-stick cooking surface by coating all cooking grates with vegetable shortening or cooking oil before preheating.
  • To reduce flare up’s keep the BBQ clean, cook lean cuts of meat, trim excess fat and avoid cooking over very high temperatures.
  • Always preheat the appliance on HIGH before adding food.
  • Always ensure that the temperature is adjusted following preheat. HIGH is intended for fast pre-heating of the appliance, searing steaks and other cuts of meat.
  • Medium heat is intended for most grilling, baking and roasting
  • Low heat is intended for warming, smoking or cooking delicate foods
  • Never pierce meat with a fork
  • Do not add salts to meat prior to grilling as it may reduce the “juiciness” of the meat
  • Do not place frozen meats on the BBQ cooking grates as this will permanently damage the cooking surface. Thaw at room temperature or in a fridge.
  • When basting foods wait until approximately half way through the cooking cycle before adding sauces.
  • Always cook with lid down to preserve BBQ temperature.
  • Always position BBQ side burner away from wind and cold air for best performance
  • After every use, allow BBQ to cool, empty grease pan, wipe outside surfaces with a suitable cleaner, dry and protect surfaces with a grill cover.

General Side Burner Tips

Your side burner will boil, sauté, stir fry and warm with ease.

  • For best results preheat your side burner for 10-15minutes on “HI”.
  • When boiling water or warming foods always ensure that you are using a covered pot or wok.
  • Ensure that your gas barbecue is positioned away from high winds or cold air as this will adversely affect your side burner preheating and cooking performance.
  • Your 10,000-13,000 BTU side burner will take longer to preheat and cook than your indoor range.
  • Remove all food residue and dirt on burner surface.
  • Inspect and clean your side burner orifice periodically and confirm that it is clear of food residue, cobwebs or other insect debris that may cause a FLASH FIRE.

General Infrared Rotisserie Burner Tips

Your Rotisserie burner delivers the succulent self-basted flavours of chickens, ducks, pork, beef or lamb roasts that only rotisserie cooking can achieve. Because the Rotisserie Burner uses radiant infrared heat, cooking times are shortened.

  • Tie the poultry or meat with a string to keep the shape uniform all around. If the meat is too heavy or irregular if may not rotate well and should be cooked by an indirect method without a spit.
  • For best results always use meat that has been thawed overnight in the fridge or at room temperature.
  • Insert rod lengthwise through the meat and fasten with forks.
  • Tighten screws with pliers as they tend to loosen during turning process.
  • Remove the warming rack prior to use.
Page 7 of the Master Chef 405 user manual — PANEL
Page 7 · click to enlarge
Page 7

FLASH FIRES

Characteristics of a Flash Fire

  • This gas barbecue has a 12,000 BTU infrared rear burner. The rear burner is designed to be used in conjunction with the Centro Rotisserie Kit. See the Rotisserie Kit for usage and assembly instructions.
  • A fire burning outside of the burner box
  • Usually visible behind or under the control panel
  • Place the prepared spit rod across the hangers inside the grill.
  • May cause damage to control panel, control knobs, and depending on fire could damage to hose and regulator and/or manifold.
  • Install motor.
  • Place a shallow cooking pan underneath meat. Adding water, beer, wine or consommé for added flavour. This dish is used to collect drippings for fast basting and naturally delicious gravy, and keeps your appliance clean.
  • Burners may burn with large yellow flames
  • Burners may not light
  • Basting liquid should be added as required and should never be allowed to evaporate.
  • Hot control knobs could indicate flare-up conditions are starting
  • To seal in juices, and for the best cooking results, ensure that the BBQ lid remains closed and the burner temperature ad justed when needed.

Prevent Flash Fires by:

  • Always begin by searing meat uncovered on HIGH. Covering meat with aluminum foil and adjusting temperature if necessary.
  • Leak test all connections
  • Remove control panel to inspect manifold and valves for damages or leaks
  • Remove burners to clean and check for blockages – perform burner safety and maintenance checks

DO NOT OPERATE REAR BURNER AT THE SAME TIME AS THE MAIN BURNERS

Regulator Flow Limiting Device

GREASE FIRES

If you are experiencing any of the following performance issues you may have activated the flow limiting feature in your regulator:

Characteristics of a Grease Fire

  • A fire burning inside the BBQ burner boxmay become uncontrollable if not monitored
  • Burners not getting hot enough
  • Usually accompanied by high flames, a lot of smoke and black soot
  • Low or incomplete burner flames
  • May cause charring on the interior of BBQ lid, lid side panels (inside and outside), may damage temperature gauge, cause brownish colouring on stainless steel lids and soot and ash build up on cooking grates.
  • Low gas pressure
  • Burners not staying lit

Prevent Grease Fires by:

Resetting the Regulator Flow Limiting feature

  • Keeping BBQ clean
1. With all control knobs and the gas source in the OFF position, Open the BBQ lid
  • Frequently cleaning the grease collection plate and grease cup
2. Disconnect the hose and regulator from the Propane tank
  • Frequently changing the ignitor battery.
3. Turn all BBQ control knobs to the “Hi” position
  • Not cooking over maximum heat for extended periods of time
4. Let stand for 1-3 minutes, allowing all excess gas in valves and manifold to dissipate
  • Burning off build-up on the cooking grates and heat plates after each use
5. Turn all BBQ control knobs back to the “OFF” position
6. With the BBQ lid still OPEN, reconnect the hose and regulator to the propane tankDo not cross thread the connection.

FOR YOUR SAFETY

7. Hand-tighten only.
  • DO NOT throw water on a grease fire
8. Check all hose connections to ensure that a positive seal has been made.
  • DO make sure that you follow all safety checks, maintenance procedures and instructions outlined in this manual before operating the BBQ
9. Slowly turn ON the propane gas supply, ¼ to ½ a turn.
10. Wait approximately 5 seconds for the hose and regulator pressure to stabilize (to prevent the flow limiting device feature from being re-activated).
  • DO protect your family and home by performing regular cleaning and maintenance of key BBQ parts including burners, flame tamers, grease tray and cooking grates.
11. Turn the selected burner control knob, to the “Hi” position
Master Chef 405 — FOR YOUR SAFETY diagram (page 7)
Fig. 14
12. Press the Electronic ignition button, or use the match and match holder, or a BBQ lighter to ignite the selected burner.
  • DO keep baking soda handy to extinguish a fire

Avoid activating the Flow Limiting Feature by following the proper start up and shut down procedures and performing a complete leak test and safety check to ensure that there are no leaks in the system, and that a positive connection has been made between the gas source and manifold assembly.

CONTROL

VALVE

Master Chef 405 — CONTROL diagram (page 7)
Fig. 15

TROUBLESHOOTING

PANEL

SPIDER WEBS INSIDE VENTURI

Resolving IGNITER Performance Issues

BURNER

If you are having difficulty with your BBQ’s Electronic Ignition a quick visual inspection of the following will help to identify the cause:

Keeping your BBQ’s burners free and clear of debris, checking for obstructions including spider webs, will ensure that your family is protected from serious safety hazards such as FLASH and GREASE Fires. For more information regarding these issues please visit www.masterchefbbqs.com

1. Check for un-plugged electrode wires or ground wire.
2. Check wires for damage including tears or breaks
3. Check electrode for cracks in the porcelain insulator
4. Replace battery. Ensure battery is installed correctly

Spiders and insects are attracted to the smell of propane and natural gas, and often build nests inside your BBQ’s burners, which is the root cause of a FLASH BACK FIRE. Lighting your burners without first checking and cleaning out the Venturi tubes, burner ports, and the inside of burners can lead to a serious flash fire resulting in damage to the BBQ, property and/ or personal injury.

5. Check battery igniter cap for proper threading
6. Check gap between electrode, gas collector box and burner
7. Check for damage to Electronic Igniter Box.
8. Check to ensure that the Electrode sparks when the igniter button is pressed.

See the Cleaning and Maintenance section of this manual for proper burner maintenance.

Page 8 of the Master Chef 405 user manual — FLASH FIRES
Page 8 · click to enlarge
Page 8
PROBLEMCAUSECORRECTIVE ACTION Igniter does not spark – Burner lights with match but not with the igniterElectrode FouledWipe the electrode with a soft, clean cloth. If electrode has any build up of grease or corrosion, lightly sand elec trode tip and clean with alcohol. Electrode or burner is wetWipe both parts dry before trying to re-light. Electrode Porcelain or ceramic insulator crackedAs the grounding surface of the burner becomes coated with grease and residue, the porcelain insulator on the electrode can crack from the heat. If this occurs, the spark being transferred through the insulator will “bleed” from the crack (cracks collect moisture and reduce the spark), and ignition will oc cur only after a build-up of gas or not at all. Replace electrode. Electrode wire (lead wire) is unplugged or has a loose connectionConfrim that the lead wire, from the Electronic Igniter module to the electrode is well attached. Loose or corroded contacts in the igniter system and electrode can impair its functionality. Proper connection can often be restored by simply disconnecting and reconnect ing the various electrode wires. Electronic Igniter Module battery is deadThe battery located in the Electronic Igniter Module may be dead. Replace battery. The correct position is with the (+) end down. Do not leave battery within Electronic Igni tion module for extended periods, if BBQ is not in use. Battery acids and corrosion can result causing permanent damage to the Electronic Ignition module. Battery cap not threaded properlyRemove the Electronic Igniter battery cap and re-attach. Ensure that the cap is prop erly attached without cross threading. Electrode sparks but the burner will not light.Electrode not properly spacedThe electrode must be properly spaced in distance from the burner and sit within the collector box, 3/16 or slightly over 1/8 of an inch from the burner – too much or too little of a gap will impair the electrode’s ability to have a positive spark, allowing the burner to light Damaged collector boxThe electrode is covered by the collector box that traps impurities to prevent the electrode and collector box from corrod ing. If either the electrode or collector box is corroded a light sanding using fnie sand paper will restore them to functionality. If the collector box is pierced or worn from excessive corrosion it must be replaced. Blockage within Venturi tubesBurner maintenance must be performed to remove any blockages within the Venturi tubes that are enabling the burner from lighting.
PROBLEMCAUSECORRECTIVE ACTION Low fuel, no fuel, or gas source not openedCheck the LP cylinder fuel level and re-fill if necessary. Open the cylinder valve if closed. Flow limiting device in regulator has been activatedFollow proper regulator folw limiting device reset procedure and/or perform a leak test to ensure that the folw limiting device was not activated due to a leak in the system. Venturi tubes not properly seated over gas jet orificesEnsure proper burner installation.
PROBLEMIDENTIFYING THE CAUSE: Burner will not light (with igniter or match)• Low or out of propane • Cylinder or the gas supply valve is turned off • Positive connection has not been made between the tank and the regulator. Regulator will not allow fuel in the line • Burner port holes or venturi tubes are blocked • Venturi tubes are not properly seated over valve orifci es • The Flow Limiting Device in the regulator has been activated Burner lights with match but not with igniter (NO SPARK)• Loose Electrode Wire connection • Broken electrode – ceramic casing around electrode damaged • Poor ground – igniter module connection not assembled properly • Battery Damaged or dead. • Faulty igniter Fire at control knob and control panel = Flash Fire• Burner port holes, Venturi tubes, and/or gas jets are blocked • Burner is improperly seated over gas jet Yellow smoky flames• Blocked Venturi tubes • Excess cooking salts on burner Flame blows out on LOW• High Wind condition – Adjust the placement of BBQ to shield from wind • Propane is running low • Burner improperly seated on gas jet • Flame Tamers (heat plates) are not in position • Flow limiting device in the regulator has been activated • NATURAL GAS MODELS: Installation issues related to incorrect size supply line installed and /or Water Column supply is not adequate for a BBQ BTU rating of this BBQ. Do not use a longer Natural Gas hose than is supplied with your BBQ. Burner does not get hot enough• BBQ needs to be preheated for 10 minutes with a closed lid. Ambient tempera tures will afefct the performance of your BBQ. Always keep lid closed in colder temperatures. • Flow limiting device in regulator has been activated. See section, what is the flow limiting device? • NATURAL GAS MODELS: Installation issues related to incorrect size supply line installed and /or Water Column supply is not adequate for a BBQ BTU rating of this BBQ. Do not use a longer Natural Gas hose than is supplied with your BBQ.
Page 9 of the Master Chef 405 user manual — Flame Tamers (Heat Distribution Plates)
Page 9 · click to enlarge
Page 9

Resolving BURNER Performance Issues

  • Remove and clean heat plates every other time you BBQ or more frequently if cooking for a large group of people.
  • Using a grill brush, brush away any buildup from flame tamers. Clean away all remaining debris with mild soap and warm water. Dry thoroughly.
PROBLEMIDENTIFYING THE CAUSE: Low or incomplete flame (assuming burners and Venturi tubes are free and clear of blockages)• Proper start up and shut down procedure not followed. Flow limiting device has been activated and requires resetting • Positive connection not made between tank and manifold. • Positive Vapour lock at coupling nut/LP cylinder connection not made. Discon nect hose and regulator from LP Cylinder and reconnect correctly. • Flame Tamers (heat plates) are missing or not in position • NATURAL GAS MODELS: Installation issues related to incorrect size supply line installed and /or Water Column supply is not adequate for a BBQ BTU rating of this BBQ. Do not use a longer Natural Gas hose than is supplied with your BBQ. Too much heat/ Excessive flare up• Excessive fat in meat • Grease collection plate and grease cup need to be cleaned • Cooking system including flame tamers and cooking grates have a build up of grease that must be removed • Lower casting of the BBQ is clogged with grease • Must reduce cooking temperature according to the type of foods being cooked.
  • If your BBQ is being stored outdoors you should clean, remove, and store your flame tamers along with your cooking grates, burners, and igniter battery indoors.
  • Avoid moisture and corrosive agents from settling on the surface.

Failure to do all of the above will lead to rapid deterioration of this part. Without removing all heat plates and inspecting them you may not realize the degree of deterioration caused. Following all instructions within this document will ensure a long life for this part and the best performance of your BBQ.

Cleaning the Grease Cup and Grease Tray

  • The grease cup and grease tray are located below the burner box of the appliance and is accessible from the rear of the BBQ. It will catch any grease dripping, and food residue that is not burnt off during cooking.
  • Always wait for grease to cool before removing the grease cup or collection tray.
  • The grease cup and collection tray should be emptied regularly to prevent possible flare ups, spillage or grease fires.
  • For easy clean up it is possible to line your grease collection tray with aluminum foil.
Master Chef 405 — Cleaning the Grease Cup and Grease Tray diagram (page 9)
Fig. 16 · Cleaning the Grease Cup and Grease Tray

CLEANING AND MAINTENANCE

Cleaning Burners and Venturi Tubes

1. Remove the cooking grates and flame tamers to reveal the burners. 2. To remove burner you must first remove the hardware used to assemble the burner into the burner box. (WD40 may be used on difficult to remove hardware) 3. Remove the burners 4. Brush the outer parts of the burner using a wire or brass bristled brush. 5. Using a flexible wire, open paper clip, or a drill bit, probe each port hole to clear it of grime and rust.

Cleaning and Maintaining your BBQ ensures safe and effective use, while eliminating the possibility of PARTS DETERIORATION and POOR PERFORMANCE.

If you are experiencing any of the following performance or safety issues including but not limited to: 1) BBQ not reaching temperature potential, 2) yellow burner flames, 3) you smell gas, 4) popping noises, 5) delayed burner ignition, 6) uneven heat, 7) flash fires, or 8) grease fires, TURN OFF YOUR GRILL immediately and perform the 30 minute maintenance regime shown below.

30 Minute BBQ Maintenance

The 30 Minute BBQ Maintenance should be performed at the beginning of the season before removing the BBQ from storage, and at least twice during the BBQ season (more if the BBQ is being used frequently and/or year-round).

6. Using a Venturi brush, or bottle cleaning brush, clean the interior of the burner. Special care should be taken to make sure the brush passes through the entire burner interior. 7. Lightly tap the Burner to remove any residue that has been dislodged from the ports and tube. Compressed air can be used to flush out any debris. 8. Visually check the gas jets at the end of each of the valves, for dirt, dust and spider webs. Clean them if necessary. 9. Re-install burners using hardware removed. Ensure that the Burners are installed correctly with Venturi tubes seated cor rectly over valve gas jet, and firmly in place. 10. Re-install flame tamers and cooking grates

1. Clean BBQ grill housing and lid 2. Remove and clean the burners, flame tamers, cooking grates, warming rack and grease tray 3. Re-assemble all parts removed and ensure proper placement 4. Perform leak test and safety check on all connections

BBQ Housing and Lid

  • Always ensure that the BBQ is cool prior to cleaning.
  • Remove the warming rack, cooking grates, flame tamers, and burners.

Cleaning PORCELAIN CAST IRON COOKING GRATES and GRIDDLE

  • Use a plastic scraper to remove build-up, food residue and ashes inside the BBQ housing and lid.

Tips:

  • If necessary, wash the inside of the BBQ burner box with a detergent and water solution. Always rinse and dry thoroughly before re-installing parts. To restore luster to parts wipe with a cloth dipped in cooking oil.
  • Always protect cooking grates against RUST/ CORROSION, water, humidity, and moisture damage by following the season ing steps outlined below.

Flame Tamers (Heat Distribution Plates)

  • Prior to preheating the BBQ, remove all build up from cooking grates using a grill brush.
  • Prep cooking grates or griddle with a light coating of vegetable shortening or cooking oil.
  • Always perform regular maintenance on your flame tamers to remove all debris. Do not allow fats, salty and acidic drippings from marinades to accumulate on your flame tamers.
  • Following every BBQ session operate BBQ on “HI” for an additional 5 minutes to burn off any build-up.
Page 10 of the Master Chef 405 user manual — STORING YOUR BBQ
Page 10 · click to enlarge
Page 10

WARRANTY AND SERVICE

How to season Porcelain Cast iron cooking grates

BEFORE YOU CALL FOR SERVICE have the following information available:

1. Remove cooking grates from BBQ and brush away all loose, or chipping porcelain and grease build-up, using a BBQ brush 2. Wash cooking grates with soap and water. 3. Rinse and dry thoroughly with paper towels. Important: Never soak or let soapy water sit on the grates for any length of time. 4. Coat entire cooking grate, top, bottom, sides and each rod with vegetable shortening. DO NOT use salted fat such as mar garine, butter, or any non-stick cooking spray. Do not use olive oil as it burns off at high temperatures. 5. Place cooking grates in either your conventional oven or in your BBQ for up to 20 minutes at 250-300 to complete the seasoning process. Time may vary depending on cooking appliance. 6. Once completed, the cooking grates must be allowed to cool down before use.

1. Serial number: The serial number is located on the upper rear panel of your BBQ, on the rating plate, as well as on the front cover of the user manual.
2. Model number: The model number is located on the front cover of the user manual, the bottom right corner of the rating label and also on your cash register receipt.
3. Proof of purchase by the original owner.

Call the Master Chef® Customer Care Hotline 1-877-707-5463 HOURS: 8AM- 7PM EST Mon-Fri, Closed Saturday and Sunday

Cleaning STAINLESS STEEL parts

IF YOUR PRODUCT IS DAMAGED:

To protect the appearance and integrity of Stainless Steel surfaces, routine cleaning is essential. Contaminants vary greatly in their effect on appearance, corrosivity and ease of removal. Identify the contaminant or experiment with various cleaners in order to resolve issues including the removal of free-iron contamination. It is impossible to wear out the stainless steel by excessive cleaning. But is possible to damage the stainless steel components and damage the corrosion resistance using products NOT made for a Stainless Steel outdoor appliance.

1. Call the Master Chef® Customer Care Hotline 1-877-707-5463
2. Do not return to the store for replacement of damaged or defective parts. Master Chef® Customer Care will ensure that all in-stock replacement parts arrive at your home within 3-10 business days.
3. Concealed Loss or Damage: If damage is unnoticed until merchandise is unpacked, resolve issue by contacting Master Chef® Customer Care immediately. Missing or damaged parts should be claimed within 30 days of purchase.

Cleaning Stainless steel Surfaces:

To ensure your satisfaction and for follow-up service, register your BBQ online at www.masterchefbbqs.com

  • Remove grease and other contaminants with a solution of detergent, solvent and water.
  • Most cleaners may have corrosive agents and MUST be rinsed off and the surface dried thoroughly.
  • Always find a small and inconspicuous spot to test cleansers before cleaning the entire BBQ.

LIMITED Warranty:

  • Ordinary carbon steel brushes or steel wool MUST NOT be used to clean stainless steel. They will scratch the finish and leave particles embedded on the surface that will corrode.

Trileaf Distributions® , hereby warrants to the ORIGINAL PURCHASER of this Master Chef® Barbecue that it will be free of de fects in workmanship, for a Limited 1-5 years, model specific, from the date of purchase, as follows:

  • Ensure that all stainless steel surfaces are wiped down frequently with a basic vinegar and water solution. If there are other cleaners being used ensure that they are specifically for Stainless Steel OUTDOOR USE. Regardless of instructions all cleaners must be rinsed off and dried with a soft cloth.

Please see Limitations and Exclusions section on the following page.

Limited 1 YearAll parts
  • Your Master Chef BBQ uses a mixture of Stainless steel 430 and Silver powder coated paint, on many parts. To clean and maintain your BBQ’s surfaces DO NOT use any chemical cleaners, as they may strip and cause permanent damage to the painted surfaces. Master Chef BBQ’s only recommends using a 50/50 mixture of vinegar and water for removing surface dirt and contamination, and a dry soft cloth for polishing. Micro fiber clothes are highly recommended.

STORING YOUR BBQ

To avoid BBQ deterioration and degradation of parts, please perform the following tasks, prior to storing your BBQ for the season.

  • Remove and clean all BBQ components as outlined in the care and maintenance section of this manual
  • Oil cooking grates with vegetable shortening after cleaning, and wrap them in a towel and store indoors.
  • To help prevent rust or corrosion, do not leave your Porcelain Cast Iron cooking grates in any humid, moist or damp condi tions over a long period of time
  • Be sure to either wrap your cooking grates in towels when not in use, storing in a dry area, or season and wrap in news paper, storing indoors.
  • If storing unit away for the winter, or for a prolonged period of time, remove the igniter battery to avoid corrosion
  • If storing the BBQ indoors : the propane cylinder MUST be removed. The propane cylinder MUST always be stored out doors, in a well ventilated area. When storing your BBQ in a garage, you should place a piece of cardboard underneath your BBQ to protect it from premature corrosion.
  • If storing the BBQ outdoors : the propane cylinder valve must be turned off. Cover the barbecue. DO NOT under any circumstances store the barbecue in the garage or near any heat source. Use a BBQ cover to help protect your BBQ from the direct environment (i.e. Rain, snow, animal droppings, etc.). However, please keep in mind that this will not protect your BBQ from moisture, condensation, and other corrosive agents. Routine cleaning is necessary.
Page 11 of the Master Chef 405 user manual — www.masterchefbbqs.com
Page 11 · click to enlarge
Page 11

WARRANTY

LIMITATION AND EXCLUSIONS

Trileaf Distributions® has the following limitations to its warranty:

1. This limited warranty is non-transferable and becomes void if used for commercial or rental purposes. 2. This warranty applies only when barbecue is used in Canada 3. Warranty is in lieu of all warranties, expressed or implied, and all other obligations or liabilities related to the sale or use of its grill products. 4. Trileaf Distributions® shall not be liable for incidental, consequential, special or contingent damages resulting from its breach of this written warranty or any implied warranty. 5. Trileaf Distributions® will repair or replace parts, at its option, proven defective under normal use and service and which on examination during the applicable warranty period. (See exclusions to warranty coverage below) 6. Shipping and handling charges are the responsibility of the original consumer-purchaser for all in/out of warranty part orders. 7. This limited warranty will not reimburse you for the cost of any inconvenience, food, personal injury or property damage. 8. Trileaf Distributions® does not authorize any person or company to assume for it any other obligation or liability in con nection with the sale, installation, use, removal, return, or replacement of its equipment; and no such representations are binding on Trileaf Distributions® 9. Visit www.masterchefbbqs.com to register your product on line. The purchaser shall retain a copy of the purchase invoice for future claims.

Trileaf Distributions® excludes from its warranty the following: a. Accidental damage, abuse, tampering or misuse, misapplication, vandalism, careless handling, b. Damages caused by improper assembly or installation, alteration, failure to follow proper usage, safety and maintenance

instructions presented throughout this manual, c. Failure to perform regular maintenance, safety checks and service, including but not limited to removal of insects from

venturi tubes, resulting in a flash fire, damage caused by grease fires, flare-up fires or fires resulting from improper connec tion of hose to gas source, d. Part failure due to lack of cleaning and maintenance, use of improper cleaning products, such as indoor stainless steel cleaners,

abrasive and chemical cleaners, porcelain oven cleaner and other chemical cleaners which can cause damage to surfaces, e. Normal wear and tear, chipping and scratching on painted or porcelain enamel surfaces, dents, discoloration caused by

environment or heat, surface corrosion, rust or rust perforation, chemical exposure in the atmosphere and other damages which result with normal use and are otherwise uncontrollable by the manufacturer.

There are no other express warranties except as set forth herein and any applicable implied warranties of merchantability and fitness are limited in duration to the period of coverage of this express written limited warranty.

To ensure your satisfaction And for follow-up service, register your grill online at:

www.masterchefbbqs.com

Trileaf Distribution Trifeuil

Toronto, Canada

M4S 2B8

Winners Canada

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Fix-it

Troubleshooting

Common problems, likely causes, and what to do.

ProblemPossible causeRemedy
Igniter does not spark – Burner lights with match but not with the igniterElectrode FouledWipe the electrode with a soft, clean cloth. If electrode has any build up of grease or corrosion, lightly sand elec­ trode tip and clean with alcohol. p.8
Igniter does not spark – Burner lights with match but not with the igniterElectrode or burner is wetWipe both parts dry before trying to re-light. p.8
Igniter does not spark – Burner lights with match but not with the igniterElectrode Porcelain or ceramic insulator crackedAs the grounding surface of the burner becomes coated with grease and residue, the porcelain insulator on the electrode can crack from the heat. If this occurs, the spark being transferred through the insulator will “bleed” from the crack (cracks collect moisture and reduce the spark), and ignition will oc­ cur only after a build-up of gas or not at all. Replace electrode. p.8
Igniter does not spark – Burner lights with match but not with the igniterElectrode wire (lead wire) is unplugged or has a loose connectionConfrim that the lead wire, from the Electronic Igniter module to the electrode is well attached. Loose or corroded contacts in the igniter system and electrode can impair its functionality. Proper connection can often be restored by simply disconnecting and reconnect­ ing the various electrode wires. p.8
Igniter does not spark – Burner lights with match but not with the igniterElectronic Igniter Module battery is deadThe battery located in the Electronic Igniter Module may be dead. Replace battery. The correct position is with the (+) end down. Do not leave battery within Electronic Igni­ tion module for extended periods, if BBQ is not in use. Battery acids and corrosion can result causing permanent damage to the Electronic Ignition module. p.8
Igniter does not spark – Burner lights with match but not with the igniterBattery cap not threaded properlyRemove the Electronic Igniter battery cap and re-attach. Ensure that the cap is prop­ erly attached without cross threading. p.8
Electrode sparks but the burner will not light.Electrode not properly spacedThe electrode must be properly spaced in distance from the burner and sit within the collector box, 3/16 or slightly over 1/8 of an inch from the burner – too much or too little of a gap will impair the electrode’s ability to have a positive spark, allowing the burner to light p.8
Electrode sparks but the burner will not light.Damaged collector boxThe electrode is covered by the collector box that traps impurities to prevent the electrode and collector box from corrod­ ing. If either the electrode or collector box is corroded a light sanding using fnie sand paper will restore them to functionality. If the collector box is pierced or worn from excessive corrosion it must be replaced. p.8
Electrode sparks but the burner will not light.Blockage within Venturi tubesBurner maintenance must be performed to remove any blockages within the Venturi tubes that are enabling the burner from lighting. p.8
Low fuel, no fuel, or gas source not openedCheck the LP cylinder fuel level and re-fill if necessary. Open the cylinder valve if closed. p.8
Flow limiting device in regulator has been activatedFollow proper regulator folw limiting device reset procedure and/or perform a leak test to ensure that the folw limiting device was not activated due to a leak in the system. p.8
Venturi tubes not properly seated over gas jet orificesEnsure proper burner installation. p.8
Burner will not light (with igniter or match)• Low or out of propane • Cylinder or the gas supply valve is turned off • Positive connection has not been made between the tank and the regulator. Regulator will not allow fuel in the line • Burner port holes or venturi tubes are blocked • Venturi tubes are not properly seated over valve orifci es • The Flow Limiting Device in the regulator has been activated p.8
Burner lights with match but not with igniter (NO SPARK)• Loose Electrode Wire connection • Broken electrode – ceramic casing around electrode damaged • Poor ground – igniter module connection not assembled properly • Battery Damaged or dead. • Faulty igniter p.8
Fire at control knob and control panel = Flash Fire• Burner port holes, Venturi tubes, and/or gas jets are blocked • Burner is improperly seated over gas jet p.8
Yellow smoky flames• Blocked Venturi tubes • Excess cooking salts on burner p.8
Flame blows out on LOW• High Wind condition – Adjust the placement of BBQ to shield from wind • Propane is running low • Burner improperly seated on gas jet • Flame Tamers (heat plates) are not in position • Flow limiting device in the regulator has been activated • NATURAL GAS MODELS: Installation issues related to incorrect size supply line installed and /or Water Column supply is not adequate for a BBQ BTU rating of this BBQ. Do not use a longer Natural Gas hose than is supplied with your BBQ. p.8
Burner does not get hot enough• BBQ needs to be preheated for 10 minutes with a closed lid. Ambient tempera­ tures will afefct the performance of your BBQ. Always keep lid closed in colder temperatures. • Flow limiting device in regulator has been activated. See section, what is the flow limiting device? • NATURAL GAS MODELS: Installation issues related to incorrect size supply line installed and /or Water Column supply is not adequate for a BBQ BTU rating of this BBQ. Do not use a longer Natural Gas hose than is supplied with your BBQ. p.8
Low or incomplete flame (assuming burners and Venturi tubes are free and clear of blockages)• Proper start up and shut down procedure not followed. Flow limiting device has been activated and requires resetting • Positive connection not made between tank and manifold. • Positive Vapour lock at coupling nut/LP cylinder connection not made. Discon­ nect hose and regulator from LP Cylinder and reconnect correctly. • Flame Tamers (heat plates) are missing or not in position • NATURAL GAS MODELS: Installation issues related to incorrect size supply line installed and /or Water Column supply is not adequate for a BBQ BTU rating of this BBQ. Do not use a longer Natural Gas hose than is supplied with your BBQ. p.9
Too much heat/ Excessive flare up• Excessive fat in meat • Grease collection plate and grease cup need to be cleaned • Cooking system including flame tamers and cooking grates have a build up of grease that must be removed • Lower casting of the BBQ is clogged with grease • Must reduce cooking temperature according to the type of foods being cooked. p.9

Ask about the Master Chef 405

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Master Chef 405

Be the first to ask — other owners or our team will answer.

Original document

Master Chef 405 manual PDF

11 pages·2.1 MB·Gas Grill·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…