Instruction/ maintenance manual of the product V-LCD15SB-AFHD-DT Marshall Electronics
Go to page of 8
16 Specifications (continued) Maintenance ■ Screen Cleaning Periodically clean the sc reen surface using amm onia-free cleaning wipes ( Marshall Part No. V-HW P-K ). A clean m icro- fiber cloth can also be use d using only non- abrasive and amm onia-free cleaning agents.
2 Contents Product Overview ................................................................................ ........................................................ ............. 3 Features ............................................................
14 On-Screen Menu (continued) SYSTEM CONFIGURAT ION SUBMENU ■ Internal SMPTE Color Bars Use to display internall y generated SMPTE split-f ield color bars. ■ User-Definable Function Buttons Use the FUNCTION 1 an d FUNCTION 2 menu item s to define each function bu tton on the front pa nel of the m onitor.
4 Installation and Initial Setup ■ Unpacking Carefully unpack the V-LCD15SB-AFHD-DT m onitor and verify that the following items are included: • V-LCD15SB-AFHD-DT Monitor with Attached Desk top St.
12 On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU (continued) ■ Monochrome Mode Use this setting to enable monochrome m ode. Only the luminance of the image will be d isplayed as a gra yscale picture. ■ Blue-Only Mode Use this setting to enable Blue-Only mode.
6 Rear Panel Features Power Input Connect the 12VDC input t o the Conxall 2-pin twis t-lock power input connector. Po wer can be supplied from the included power supply, or from a variety of DC sources supplying at least 3 Am ps at 12 Volts.
10 On-Screen Menu (continued) MARKER SETUP SUBMENU (contin ued) ■ 4:3 Markers Use this setting to super impose one of 5 m arkers on the screen when in 4:3 mode. This s etting is disabled when the aspect ratio is set to 16:9, o r when Pixel-to-Pixel ™ , U nderscan, or H/V Del ay is enabled.
8 On-Screen Menu STRUCTURE OVERVIEW MAIN MENU AND NA VIGATION Access the main m enu by pushing and holding the M ENU button on th e front panel of the m onitor until the m ain menu appears (approxim ately 1-2 seconds) . • Step through menu item s using the ↑ and ↓ butto ns.
An important point after buying a device Marshall Electronics V-LCD15SB-AFHD-DT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Marshall Electronics V-LCD15SB-AFHD-DT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Marshall Electronics V-LCD15SB-AFHD-DT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Marshall Electronics V-LCD15SB-AFHD-DT you will learn all the available features of the product, as well as information on its operation. The information that you get Marshall Electronics V-LCD15SB-AFHD-DT will certainly help you make a decision on the purchase.
If you already are a holder of Marshall Electronics V-LCD15SB-AFHD-DT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Marshall Electronics V-LCD15SB-AFHD-DT.
However, one of the most important roles played by the user manual is to help in solving problems with Marshall Electronics V-LCD15SB-AFHD-DT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Marshall Electronics V-LCD15SB-AFHD-DT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
