Instruction/ maintenance manual of the product MD-6517-N Maretron
Go to page of 2
® ® Installation Instructions MD-6517-N Motion Detector Instructions Please follow these instructions to conn ect the MD -6517-N to the NMEA 2000 network via a Maretron SIM100 Switch Indicator Module. The wiri ng diagram appears in Figure 1 on the reverse of this page.
® ® Copyright © 2008 Maretron , LLP All Right s Reserved P/N: M001803 Rev.1.1 9/08 Factory-inst alled 8 K Ω end-of- line resistor MD-6517-N For installation support, please conta ct: Maretron, LLP 9014 N. 23 rd Ave #10 Phoenix, AZ 85021 Telephone: (+1) 877-550-9100 E-mail: support@maretron.
An important point after buying a device Maretron MD-6517-N (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maretron MD-6517-N yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maretron MD-6517-N - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maretron MD-6517-N you will learn all the available features of the product, as well as information on its operation. The information that you get Maretron MD-6517-N will certainly help you make a decision on the purchase.
If you already are a holder of Maretron MD-6517-N, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maretron MD-6517-N.
However, one of the most important roles played by the user manual is to help in solving problems with Maretron MD-6517-N. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maretron MD-6517-N along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center