Instruction/ maintenance manual of the product ARM904 Abocom
Go to page of 10
Multi-Function Wire- less Router Wireless Access Point Broadband Internet Access 4-Port Switching Hub Quick Install Guide L This guide covers only the most common situations.
R equirements • DSL or Cable modem for broadband Internet access. • Standard Network cables. • TCP/IP network protocol installed on each PC. • Wireless Access Point requires Wirele ss devices compliant with the IEEE 802.11g specifications. Setup n Physical Installation 1.
Page 2 4. Connect the supplied Power Adapt er and power on. 5. Check the LEDs • The Power , Internet , and WLAN LEDs should be ON. • For each active LAN (PC) connection, the LAN LED should be ON. o Configuration The Wireless Router can "Plug and Play" i f your DSL/Cable modem connec- tion uses only a dynam ic IP address.
Page 3 Manual Configuration 1. Start your PC. If it is already started, restart it. It will then obtain an IP Address fro m the Wireless Router's DHCP Server. 2. Start your WEB browser. In the Address box, enter the fol lowing: HTTP://192.168.1.254 The default user name is 〝 adm in 〞 , the default password is left blank.
PC Setup - Windows n TCP/IP Setup • If using the default Wireless Router settings, and the default Win- dows TCP/IP settings, no changes need to be made.
4. The option "Obtain an IP address autom atically" should be select ed, as shown above. o Internet Access For Window s 9x/ME/2000 1. Select Start Menu - Settings - C ontrol Panel - Internet Opti ons . 2. Select the Connection tab, and cli ck the Setup button.
Page 6 For Window s XP 1. Select Start Menu - Control Panel - Network and Internet Connect ions . 2. Select Set up or change your Internet Connecti on . 3. Select the Connection tab, and cli ck the Setup button. 4. Cancel the pop-up "Location Inform ation" screen.
Page 7 Macintosh Setup n Internet Access 1. Open the TCP/IP Control Panel . 2. Select Ethernet from the Connect via pop-up m enu. 3. Select Using DHCP Server from the Confi gure pop-up menu. The DHCP Client ID fiel d can be left blank. 4. Close the TCP/IP panel, savi ng your settings.
Page 8 Linux Setup using X Windows n Internet Access Follow this procedure to set your sy stem to act as a DHCP cl ient, obtaining an IP Address and related data from the Wireless Router's DHCP Server. 1. Start your X Windows client . 2. Select Control Panel - Ne twork 3.
Page 9 Wireless Access P oint Setup In order to use the Access Point, other Wireless devices m ust use the same SSID and WEP settings as the Wireless Router.
An important point after buying a device Abocom ARM904 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Abocom ARM904 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Abocom ARM904 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Abocom ARM904 you will learn all the available features of the product, as well as information on its operation. The information that you get Abocom ARM904 will certainly help you make a decision on the purchase.
If you already are a holder of Abocom ARM904, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Abocom ARM904.
However, one of the most important roles played by the user manual is to help in solving problems with Abocom ARM904. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Abocom ARM904 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
