Instruction/ maintenance manual of the product UMLZOODW Makita
Go to page of 12
n Battery Cartridge 7000 120 mm (4-3/4") MODEL UMl2OOD 120 mm (4-314") MODEL UMlZOODW With Fast Charger Model DC7100 Fast charger INSTRUCTION MANUAL input Charging time Voltage SPEC I F I CA.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- READ ALL INSTRUCTIONS. 1.
IMPORTANT SAFETY INSTRUCTIONS Length of Cord (Feet) AWG Size of Cord I. SAVE THESE INSTRUCTIONS - This manual 25 50 100 150 18 18 18 16 9. Do not operate charger with damaged cord or plug - replace them im- mediately.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
ASSEMBLY CAUTION : Always be sure that the battery cartridge is I 0 Remove the wing bolt from the motor housing. Insert the shaft into the motor housing, align the hole in the shaft with the hole in the motor housing. Replace the wing bolt and tighten it securely.
Installing or removing battery cartridge 0 Always switch off the tool before insertion or removal of the battery cartridge. .To remove the battery cartridge, pull out the set plate on the bottom of the tool and grasp both sides of the cartridge while withdrawing it from the barrel.
Installing or removing blade CAUTION : Always be sure that the battery cartridge is removed before installing or removing blade. 0 Insert the blade into the groove in the blade holder until the blade is held by the two protrusions on the blade holder.
Switch action .To prevent the trigger from being acci- dentally pulled, a lock-off lever is pro- vided as a safety feature. To start the tool, slide the lock-out lever in the direction of the arrow and pull the trigger.
CAUTION : Forcing the tool may shorten the operating time per battery charge. If the tool is operated continuously until the battery cartridge has discharged, allow the tool to rest for 15 minutes before proceeding with a fresh battery. NOTE : You can expect up to 35 minutes running time on a single charge.
ACCESSORI ES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Sep.-12-'85 EN I 120 mm (4-3/4") CORDLESS GRASS TRIMMER Model UM1200D @-- Note: The switch and other part configurations may differ from country to country.
MODEL UM1200D ,,!& DESCRIPTION 1 1 Compression Spring 3 2 1 Lock off Lever 3 1 Grip R 4 1 Swwh 5 1 Switch Lever 6 1 Grip L I 1 Wing Bolt M4x30 8 1 Name Plate 9 1 Set Plate 10 1 Battery Holder Sep.
An important point after buying a device Makita UMLZOODW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita UMLZOODW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita UMLZOODW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita UMLZOODW you will learn all the available features of the product, as well as information on its operation. The information that you get Makita UMLZOODW will certainly help you make a decision on the purchase.
If you already are a holder of Makita UMLZOODW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita UMLZOODW.
However, one of the most important roles played by the user manual is to help in solving problems with Makita UMLZOODW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita UMLZOODW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center