Instruction/ maintenance manual of the product UH6310A Makita
Go to page of 11
n Effective cutting blade length MODEL 450 mm (17-314") MODEL UH4510A 630 mm (24-3/4") MODEL UH6310A Equipped with electric brake Strokes Dimensions Net per minute IL x W x HJ weight INSTRUC.
IM PO RTANT SAFETY INSTRUCTIONS (For All Tools) WARNING - TO REDUCE THE RISK OF INJURY, BASIC SAFETY PRECAUTIONS SHOULD BE OBSERVED. INCLUDING THE FOLLOWING: READ AND FOLLOW ALL INSTRUCTIONS. 1. 2. 3. 4. 5. 6. 7. 8. 9. IO. 2 DRESS PROPERLY - Do not wear loose clothing or jewelry.
Total Length of Cord in Feet 25 50 100 AWG Size of Cord 18 1 16 16 - I Contact Makita Authorized or Factory Service Center if a proper extension cord cannot be found. 15. Inspect blades periodically and replace before operation if damaged. 16. Hold the tool firmly with both hands.
Installing grip Attach the grip onto the grooves in the tool side and secure with the two screws. WARN I NG : DO NOT USE WITHOUT GRIP. Hook When using an extension cord, secure it to the tool‘s cord with the hook provided. Attach the hook about 100-200 mm (4”- 8”) from the extension cord connector.
Operation Refer to the Important Safety Instructions before operation. Do not attempt to cut branches thicker than 12 mm (15/32") diameter with this trimmer. These should first be cut with shears down to the hedge trimming level. Hold the trimmer with both hands and move it in front of your body.
To cut a hedge side evenly, i from the bottom upwards. it helps to cut Trim boxwood or rhododendron from the base toward the top for a nice appearance and good job. CAUTION : 0 Be careful not to accidentally contact a metal fence or other hard objects while trim- 0 Do not attempt to trim too much at a time, or malfunction of the tool may result.
MAINTENANCE CAUTION : Always be sure that the tool is switched off and unplugged before attempting to perform inspection and maintenance. Blade maintenance After operation, clean off the blades (both sides) with a stiff brush. Then wipe the blades with a cloth and coat them with light machine oil.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Mar-13 '89 US I HEDGE TRIMMER 450 mm (17-3/4") Model UH4510A 630 mm (24-3/4") Model UH6310A @- Note: The switch and other part configurations may differ from country to country.
MODEL UH4510A. UH6310A I;,'," AtD DESCRIPTION Mar -13-'8Y US "",M DESCRIPTION MACHINE ~ 1 2 3 4 5 6 7 8 Y 11 13 14 15 16 17 18 19 20 21 1 1 1 1 1 1 2 1 1 1 1 1 1 1 I 1 1 1 1 -.
MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita UH6310A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita UH6310A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita UH6310A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita UH6310A you will learn all the available features of the product, as well as information on its operation. The information that you get Makita UH6310A will certainly help you make a decision on the purchase.
If you already are a holder of Makita UH6310A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita UH6310A.
However, one of the most important roles played by the user manual is to help in solving problems with Makita UH6310A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita UH6310A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center