Instruction/ maintenance manual of the product JV2000 Makita
Go to page of 15
MODEL JVZOOO INSTRUCTION MANUAL DOUBLE INSULATION SPEC1 FICATIONS Max. cutting capacities in wood of stroke 20 mm 1 50" 6 mm 263 mm 1.6 kg (3/4") (2") 1 (114") 1 0-3'400 1 (10-3/8") (3.
IMPORTANT I SAFETY INSTRUCTIONS TY SONAL READ REDLCE (For All Tools) PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- INJURY, INCLUDING THE FOLLOWING: ALL INSTRUCTIONS. 1. 2. 3. 4. 5. 6. 7. 8. 9. IO. 11. 12. 13. 2 WORK AREA CLEAN.
14. F E I' 15. L 16. ( 17. $ t 18. ( F C r C E c I I' t 19. ( 20. F t I vo LT outle namc for tk the tl voltas IMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to !e that keys and adjusting wrenches are removed from tool before turning on.
ADDITIONAL SAFETY RULES 1. Avoid cutting nails. Inspect for and remove all nails from the workpiece be- 2. Don't cut hollow pipe. 3. Do not cut oversize workpiece. 4. Check for the proper clearance beneath the workpiece before cutting so that 5. Hold the tool firmly.
HOW TO USE Installing jig saw blade m Use the hex wrench to loosen the hex socket head bolt which holds the blade. Loosen I Fig 1 With the blade teeth facing forward, insert the blade into the blade holder as far as it will go.
Switch action To start the tool, simply squeeze the switch lever. Release the lever to stop. Tool speed (0 to 3,400 RPM) is increased by increasing pressure on the lever. CAUTION : Before plugging in the tool, always check to see that the paddle switch actuates pro- perly and returns to the "OFF" position when released.
Operation Turn the tool on before contacting the workpiece. Then rest the base flat on the workpiece and gently move the tool for- ward along the previously marked cutting line. Plunge cutting Starting a cut at other than the edge of the workpiece without first drilling a starting hole requires a “plunge cut”.
Bevel cutting 1. With the base tilted, you can make bevel cuts at any angle between 0" and 45" (left to right). 2. Loosen the bolt on the back of the base with the hex wrench. Tilt the base to the desired angle. The edge of the hous- ing indicates the bevel angle.
Using guide rule (Rip fence) 1. When cutting widths of under 150 mm (6") repeatedly, use of the guide rule will assure fast, clean, straight cuts. 2. To attach the guide rule (rip fence), use the hex wrench to loosen the screw on the under side of the base in front, slip in the guide rule and secure the screw.
2. When attaching the circular guide, use the pin, inserting it in the center hole (arrow) and secure it with the threaded knob. The circular guide attaches to the base of the tool in the same manner as the guide rule (rip fence). Metal cutting Always use a suitable coolant (cutting oil) when cutting metal.
MAINTENANCE CAUTION : Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Replacing carbon brushes Remove and check the carbon brushes regularly. Replace when they wear down to about 4.5 mm (3/16") or less.
ACCESSORIES CAUTION These accessories or attachments are recommended for use with your Makita tool specified in this manual The use of any other accessortes or attachments might present a risk of injury to persons The accessories or attachments should be used only in the proper and intended manner.
JIG SAW @" Model JV2000 hc.-18-'84 EN Note: The switch, noise suppressor and other part configurations may differ from country to country 13.
MODEL JV2000 AtD DESCRIPTION Dec -18 84 US $s0ED DESCRIPTION MACHINE ~ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 6 1 1 1 1 1 1 1 1 2 1 4 1 1 1 1 1 2 1 1 .
MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita JV2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita JV2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita JV2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita JV2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Makita JV2000 will certainly help you make a decision on the purchase.
If you already are a holder of Makita JV2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita JV2000.
However, one of the most important roles played by the user manual is to help in solving problems with Makita JV2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita JV2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
