Instruction/ maintenance manual of the product JR3010 Makita
Go to page of 12
Chain Vise Recipro Saw Length of stroke 28 mm 11-118") MODEL JR3010 Net weight Strokes per minute Vise capacity Overall length ,without 0 - 2,200 :,?,--':-:;; 435 mm 117-1/8") 2.9 kg (6.4 Ibs) INSTRUCTION MANUAL SPECIFICATIONS Manufacturer reserves the right to change specifications without notice.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- READ ALL INSTRUCTIONS. 1.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
ADDITIONAL SAFETY RULES 1. Wear a hard hat (safety helmet), safety glasses and/or face shield. It is also highly recommended that you wear a dust mask, ear protectors and thickly padded gloves. 2. Check the blade carefully for cracks or damage before operation.
Installing or removing saw blade CAUTION : Always be sure that the tool is switched off and unplugged before installing or removing the blade. The blade installing position varies depending upon the type of blade being used. Install the blade in the proper position as shown in the figures below.
Installing or removing vise assembly To install the vise assembly, insert the shaft of the vise assembly into the hole in the housing as far as it will go. The shaft of the vise assembly will be grasped by the stop- per automatically. Make sure that the vise assembly cannot be removed even though you try to pull it out.
Operation 1. Cutting with the vise assembly : Secure the tool to the workpiece as de- scribed in “Securing tool to workpiece” section. Bring the blade into light con- tact with the workpiece. First, make a pilot groove, using a slower speed until the blade has cut to a depth of 1 - 3 mm (3/64” - 1/8’)).
MAINTENANCE CAUTION : Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, carbon bru.
Tooth Specification Oty. Teeth Part ## Per Pkg. Per Inch Saw Blades Application Overall Length Wood Cutting Blade 1723018-0A 1 1s I 1 6' 6' 723018-A-5 7230 1 8-A-2 6" High Carbon Steel Fleam Ground 1.049" I Cuts nail free wood -rough In work.
Saw Blades Bi-metal Blade Combination of high speed steel teeth welded to a shatter proof flexiblf backed blade. Ultra long life blade. 6" E:: *All illustrations shown are general representa- tions for blades in that category. Actual design of blades may vary slightly.
Aug.-17-'89 US CHAIN VISE RECIPRO SAW Model JR3010 Note: The switch, noise suppressor and other part configurations may differ from country to country.
MODEL JR3010 Aug -17'89 US 'i:M ,& DESCRIPTION 'i:M A&, DESCRIPTION MACHINE ~ 1 2 3 4 5 6 7 8 9 IO 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 38 .
An important point after buying a device Makita JR3010 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita JR3010 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita JR3010 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita JR3010 you will learn all the available features of the product, as well as information on its operation. The information that you get Makita JR3010 will certainly help you make a decision on the purchase.
If you already are a holder of Makita JR3010, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita JR3010.
However, one of the most important roles played by the user manual is to help in solving problems with Makita JR3010. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita JR3010 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
