Instruction/ maintenance manual of the product BFL200F Makita
Go to page of 16
INSTR UCTION MANU AL W ARNING: F or your personal saf ety , READ and UNDERST AND bef ore using. SA VE THESE INSTR UCTIONS FOR FUTURE REFERENCE. Cor dless Angle Nut Runner MODEL BFL080F MODEL BFL081F M.
2 SPECIFICATIONS • Manuf acturer reser ves the right to change specifications without notice. • Specifications ma y differ from country to countr y . GENERAL SAFETY R ULES USA003-1 (FOR All BA TTER Y OPERA TED T OOLS ) W ARNING: Read and understand all instructions.
3 SA VE THESE INSTR UCTIONS Wo r k A r e a 1. Keep y our work area clean and well lit. Cluttered benches and dark areas invite acci- dents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
4 18. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edge are less likely to bind and are easier to control. 19. Check f or misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’ s operation.
5 SYMBOLS USD301-1 The f ollowings show the symbols used f or tool. V ....................... volts ................... direct current .................... no load speed .../min ................ rev olutions or reciprocation per minute IMPOR T ANT SAFETY INSTR UCTIONS FOR CHARGER & B A TTER Y CAR TRIDGE USC002-3 1.
6 11 . Do not disassemble charger or battery cartridge; take it to a qualified ser viceman when service or repair is required. Incor- rect reassembly ma y result in a risk of electric shock or fire. 12. T o reduce risk of electric shock, unplug charger fr om outlet before attempting any maintenance or cleaning.
7 SYMBOLS The f ollowing show the symbols used f or the charger . Be sure that you understand their meaning bef ore use. .......... Ready to charge ............. Charging ............. Charging complete ........... Delay charge (Cooling) ........ Def ective batter y .
8 FUNCTIONAL DESCRIPTION CA UTION: • Alwa ys be sure that the tool is switched off and the batter y cartr idge is remov ed bef ore adjusting or checking function on the tool. Installing or removing battery cartridge • Alwa ys switch off the tool bef ore inser tion or remov al of the batter y cartr idge.
9 3. Charge the batter y cartr idge with room temperature at 10 ° C - 40 ° C (50 ° F - 104 ° F). Let a hot batter y cartr idge cool do wn before charging it. 4. Charge the Nick el Metal Hydride batter y car tridge when you do not use it f or more than six months.
10 Switch action CA UTION: • Bef ore inser ting the batter y car tridge into the tool, alwa ys check to see that the s witch trigger actuates properly and retur ns to the “ OFF ” position when released. T o star t the tool, simply pull the switch trigger .
11 LED indicator The lamp on the tool shows the f ollowing functions . 003814 Function Status Status of the LED indicator/beeper Action to be taken LED indicator Beeper Auto-stop f astening This function works when the tool has reached the preset fastening torque and normal tightening has been completed.
12 Adjusting the fastening torque When you wish to driv e machine screws, wood scre ws, he x bolts, etc. with the predetermined torque, adjusting the f as- tening torque as fo llows. 1. First remov e the batter y car tridge from the tool. 2. Loosen the screws securing the light cov er .
13 Installing or removing soc ket T o install the socket, push it onto the square drive of the tool with one hand by depressing a pin on the square driv e with another hand until it locks into place . T o remov e the sock et, simply pull it off depressing the pin on the square drive .
14 NO TE: • The re volution angle means the angle which a screw/bolt re volv es when the tool attains to 100% from 50% of desired torque. • Use of a low temperature conditioned battery car tridge ma y sometimes give warning for battery car tridge capacity by w ar ning lamp and beeper which mak es the tool stop immediately .
15 MAINTENANCE CA UTION: • Alwa ys be sure that the tool is switched off and the batter y cartr idge is remov ed before attempting to perf or m inspection or maintenance. Replacing carbon brushes Remov e and check the carbon brushes regularly . Replace when they we ar down to the limit mark.
Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita BFL200F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita BFL200F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita BFL200F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita BFL200F you will learn all the available features of the product, as well as information on its operation. The information that you get Makita BFL200F will certainly help you make a decision on the purchase.
If you already are a holder of Makita BFL200F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita BFL200F.
However, one of the most important roles played by the user manual is to help in solving problems with Makita BFL200F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita BFL200F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
