Instruction/ maintenance manual of the product AN911H Makita
Go to page of 10
Models No. Description PR ODUCT T ECHNICAL INFORMA TION C ONCEPT AND MAIN APPLICA TIONS S pecif ication S tandard equipment O ptional accessories P 1/ 1 0 Dimensions: mm (") Width (W) with Hook w.
P 2 / 1 0 R epair [1] NECESSARY REPAIRING TOOLS Item No. 1R266 1R267 Spring pin extractor M2 Spring pin extractor M2.5 Spring pin extractor M3 1R268 1R291 Retaining ring S and R pliers 1R231 1/4".
P 3 / 1 0 R epair [2] LUBRICATION (cont.) Item No. Description Lubricant ThreeBond 1321/1342 or Loctite 242 Fig. 2 ThreeBond 1321/1342 or Loctite 242 Item No.
P 4 / 1 0 R epair [3] ASSEMBLING/ DISASSEMBLING [3]-1. Head valve section 1) Loosen four M6x45 Hex socket head bolts and remove Top cap complete. ( Fig. 3 ) 2) While filling one of two holes of Rear cushion with finger, blow the air into the other hole with air duster.
P 5 / 1 0 R epair [3] ASSEMBLING/ DISASSEMBLING [3]-2. Driver, Cylinder stay, Valve seat [3]-3. Magazine section (1) Remove Top cap complete in accordance with mentioned in previous page. (2) Remove O ring 6 (Refer to Fig. 3 ) in advance to prevent missing.
P 6 / 1 0 R epair [3] ASSEMBLING/ DISASSEMBLING [3]-3. Magazine section (cont.) Refer to previous page. (1) Insert one end of Compression spring 2 into the hole in Adjust sleeve, and attach Steel ball 3.5 to the other end of Compression spring 2 using grease in order not to drop off.
P 7 / 1 0 R epair [3] ASSEMBLING/ DISASSEMBLING [3]-4. Trigger valve, Front cushion (cont.) Refer to previous page and take the disassembling step in reverse. Note : Trigger valve case and Trigger guide have to be firmly inserted into places until the click sounds can be heard.
P 8 / 1 0 R epair [3] ASSEMBLING/ DISASSEMBLING [3]-5. Trigger ass’y (cont.) (1) Set Torsion spring 4 (Part No. 233503-1) to the hook of Lever, then pass Pin 3 through Trigger base, Trigger, Torsion spring 4 and Lever. ( Fig. 25 ) (2) After Assembling Torsion spring 5, Stopper plate, Torsion spring 6 and Lever, pass Pin 3 through their holes.
P 9 / 1 0 R epair [3] ASSEMBLING/ DISASSEMBLING [3]-7. Driver guide, Piston for nail loading (1) Remove Driver guide in accordance with the clause of [3]-3. (2) Remove two M5x35 Hex socket head bolts for Cylinder. Note : Be careful that their bolts and Cylinder pop out by reaction force of Compression spring 6 and Compression spring 9.
P 1 0 / 1 0 R epair [3] ASSEMBLING/ DISASSEMBLING [3]-8. Door cover section (1) Attach Compression spring 4 (silver) and Compression spring 5 (black) to the specific places between Door and Door cover using grease. (2) Assemble Door cover to Door as illustrated in Fig.
An important point after buying a device Makita AN911H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita AN911H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita AN911H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita AN911H you will learn all the available features of the product, as well as information on its operation. The information that you get Makita AN911H will certainly help you make a decision on the purchase.
If you already are a holder of Makita AN911H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita AN911H.
However, one of the most important roles played by the user manual is to help in solving problems with Makita AN911H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita AN911H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
