Instruction/ maintenance manual of the product 410 Makita
Go to page of 12
Dust Collector MODEL 410 8.7 mJ/min. 510 mm (20") ,o,ooo 287 mm x 285 mm x 280 mm INSTRUCTION MANUAL 9.3 kg SPEC IF I CAT I 0 N S 1307 cu. ft./min.) of water Dimensions IL Hj Peak air flow when hose and dust bag 1 Sealed suction 1 ;;;;dl 1 are installed No load (1 1-114'' x 11.
IMPORTANT SAFETY INSTRUCTIONS Wh n sing an electrical appliance, basic precaution always be followed, including the following: sha rld READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE WARNING -TO reduce the risk of fire, electric shock, or injury: 1.
14. Use extra care when cleaning on stairs. 15. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present. 16. EXTENSION CORDS: Use only three-wire extension cords which have three- prong grounding-type plugs and three-pole receptacles which accept the tool's plug.
GROUNDING INSTRUCTIONS This appliance must be grounded. If it should malfunction or breakdown, ground- ing provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment- grounding conductor and grounding plug.
1. When using this tool to collect dust into the dust bag Installing hose Attach the end of hose (the metal end) to the inlet. To attach it, align the protrusions on the inside of hose with the slots in the inlet, push the hose in and turn it clock- wise.
Overload protector The overload protector automatically cuts out to break the circuit whenever heavy work is prolonged. If this occurs, first turn off the main switch and unplug the tool. Then de- tach the hose and the inlet from the tool and remove the foreign matter clogging the fan.
2. When exhausting dust from indoors to outdoors Installing hoses Attach one hose to the inlet and another The total length of exhaust hose and suc- hose to the outlet in the same manner as mentioned in page. 5. CAUTION : tion hose should be less than 10 meters (32 feet).
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
If you connect this dust collector to a Makita planer or planer-jointer, you can perform clean, dust-free operation. To do so, use shaving hoods. CAUTION: .When dust or shavings exhausted from the planer or planer-jointer are large or wet, run the planer or the planer-jointer under light load.
0 Y-joint assembly Part No. 122342-3 (For Model 2030, 2030N) 0 Hood for Model 2012 Part No. 19201 0-2 Can be used to collect chips and sawdust from auto-planer or jointer feed side by switching. 0 Hood for Model 2030N Part No. 191 71 9-3 0 Hood for Model 2004 Part No.
Oct -31-85 EN DUST COLLECTOR Model 410 Note: The switch, noise suppressor and other part configurations may differ from country to country. 11.
July-17-'86 US ",'OM $.D DESCRIPTION ':,'OM ,& DESCRIPTION MACHINE ~ 1 2 3 4 5 6 7 '8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 2 2 2 1.
An important point after buying a device Makita 410 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 410 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 410 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 410 you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 410 will certainly help you make a decision on the purchase.
If you already are a holder of Makita 410, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 410.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 410. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 410 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
